DerDer

As regards the sector gear plastic cover, ICS make a version. Difficult to find it stock. So recommend going the hipster route and getting one of Etsy. Something like this: https://www.etsy.com/uk/listing/868455792/6sa-version-3-gearbox-shell-gear-cover?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=6s+version+3+gearbox+shell+gear+cover&ref=sr_gallery-1-1&edd=1&sts=1&referrer_page_guid=f7a3d0d54be.f4ae73a1e61c1e622b82.00&organic_search_click=1 As regards the button, recommend emailing someone like Fire support or eagle 6. Alternatively the HK sites might have something. Real sword used to make an upgraded steel replacement but are are defunct these days unfortunately.

That makes sense. Seemed vaguely familiar.

On the one hand, it's good they are still cranking stuff out. On the other, it's not the most appealing... Like a video game model for a generic scifi to avoid copyright infringement.

If B&T replicas were the new hot thing in airsoft, wouldn't be the worst thing in the world. Might get a readily available APC223 or APC308.

As found at the MOA show by LCT's social media post. Looks promising.

Near eight hundred and fifty euro is a fair chunk of change. Still it's the first GBBR Famas. Also Cybergun needs to get their cut. Nice to see one of the original airsoft offerings available in a more contemporary offering. Northeast between their various SMGs and now this, looking forward to seeing what they come up with in the future.

A IWI Arad would also be nice addition to the airsoft world. Filling that not quite a M4 AR void similar to the LR300 or 416.

So more fake news? In hindsight, I don't think I have every seen a photo of a Hamas Jihadi with a MP5.

The composition of that meal is strangely unsettling.

The S&T is a bit plasticky but a nice introduction to the Tavor. The ergonomics are very decent. Also found it very accommodating in terms of mag compatibility i.e. ran stanags/EPMs without any problems. Just be vary of the magazine catch, lost a midcap because of it. Can certainly see why IWI moved to an M4 style magazine release in the X95 Tavor.

Very true. A Negev LMG would also be swell.

Bit of a silly tit. Still as an aside, a high quality Tavor X95 would be welcome in airsoft.

On closer inspection, you are correct. Mixed up the MK43 with an E6. Out of the four models, the E3 is the standout. Would be great to see one on the skirmish field. Imagine Lambda defence is tied up with their new B&T Smgs and GPMG series. Still if the LCT gets a bit of traction, they might end up releasing a conversion kit. If I was coughing up the big bucks, a LCT based model might be preferable to an A&K model. Time will tell.

Imagine it will be a similar price to their older line, as you mentioned. Fire support have it listed as £1349. Could see them charging similar again. The Bullgear PKM hop up unit was compatible with some M60 models. So if the hop up unit is dreck, that's another option. The company teased a HK21 in the past but imagine the M60 would be a better seller. Will be disappointed when LCT display a teaser and then bring to market an AEG, faster than King Arms and their FN FAL re-release. Still will give the Taiwanese company credit, a higher quality M60 would be a nice alternative to A&K offerings. Also a M60E3 would be an expensive but more readily available alternative to the Inokatsu of years gone by.

Was recently looking at LCT's facebook page. At the end of the calendar preview, they would seem to have a promotion for a M60 series. Including the Vietnam "pig", as well as a few more contemporary models. One looks like the Danish E6. Only a screen grab, imagine we will get more info later. Possibly the MOA show? The company had a classic M60 in the past albeit a limited production one.

There's an expensive Kydex option. Will take a while but retention is usually good. https://www.kydexcustomsuk.com/collections/rifle-magazine-carriers/products/ares-striker-mag-carrier

It's an obvious step. They have the experience with Gas replica from their pistol series, together with past production of the Vector Aegs. Part of me is disappointed they didn't start cranking out FN replicas, after their P90. A Krytac FN FAL or Five-Seven would have been a nice development.

The Kydex holsters are very nice. Just to give an alternative source, Kydex customs are also a good choice. You will need to budget for a mount. https://www.kydexcustomsuk.com/collections/pro-series-holsters/products/pro-series-aap-01-holster

Is the screw on the selector tightened sufficiently? Here's a link to various causes of selector problems https://tacticalparts.com/blog/diagnosing-version-3-selector-switc/

G&G made a variant with a side scope mount. The build quality is probably quite dated for the cost. This model: https://www.guay2.com/en/product/detail-233

That lambda defence sure is something.

That person would have woken up at least once with a horse's head in the bed. Alternatively they would have moved onto an industry with more exacting and honest standards, something like homeopathy.

As per the DCA facebook page, barrel production is underway. Would certainly go for an aluminium one myself, as the guts of ten kilos would be enough to lug around.

The M9a1/M9 are lovely performing pistols. It is a pity TM haven't come out with a ready threaded variant similar to their HK 45 tactical. In fact an updated Tactical master with a threaded barrel would be swell.

Here's hoping they ship in October. Would be nice to get some feedback on their offering.