Appraisals

So, after deciding I'm not going to use my WW2 kit anymore, regretfully the Thompson is not going to get used. It is a Cyma Thompson as standard shooting at 300 FPS on a .2. not been used for quite a few years. But what makes this special is a few years ago a guy was converting genuine Thompson wood to fit the Airsoft version along with manufacturing his own pistol grip to fit over the motor. As can be seen the wood truly has awesome patina and would (pun intended) look great for any WW2 airsofter/reenactor. What's people's thoughts on what this could be worth. Comes with 4 high caps and 1 drum mag Thanks in advance, Sam.

Make/brand: ThunderC#NT Sound Amplifier This is a weird one. This is a sound amplifier in the form of a silencer. It is full aluminium and extremely well made. I got it as part of a job lot that I bought when I first started Airsoft. The guy I got it off told me it was 1 of 2 made so just wanting to see if it is worth anything. I have no use for it as I use GBBRs and they make enough noise. Any accessories included: Nope Pictures:

Make/brand: Tipmann Any accessories included:? Pictures: Got these parts, hanguard, stock etc. Unsure what the silver bit is. Anyone got an idea/price.

Make/brand: NOVA/TM Any accessories included: Nope Got it in a deal, need to know what it’s worth, serial number 0004 if it helps Pictures:

Hi, Due to health and work reasons, i need to look at shifting on some gear. anyone able to give ideas on a price for this? just over 2k rounds through it. Details are: Internal: Titan Expert S-hopped: setup on 0.32g blasters hitting 60m target ASG gears + shim metal bushings ported sorbo pad AOE red cylinder head Prommy piston and head minus tooth speed motor M95 spring spring guide stock plate and deans shooting at ~340fps on 0.2 External: DE Element PEQ PTS DE EPF2-S Foregrip DE Aimpoint clone DE G33 Magnifier clone Dual bu…

Just want to test the water price-wise, as not skirmished for ages and am not wholly sure if I am done with it to be honest. Attached a pic of current set up. TM 416C - flat HOP installed - lifts 0.3s and above with little difficulty - along with front wiring to MagPul grip and a MOSFET installed (cannot remember which brand). Recently serviced by Crawley Surplus. 340-350 fps with 0.2s iirc. 6 TM Lo-Cap NGRS magazines black 1 TM Lo-Cap NGRS magazine tan 1 TM 416C Lo-Cap battery mag black 2 Mid-cap PMAG style NGRS magazines black TM 416 DEVGRU suppressor and flash hider plus original TM flash hider VFC RAL 8000…

Hey guys & girls, I have recently acquired a TM 417 NGRS as a trade from a friend ( a very trusted friend) who has stated that there has been a lot of work and parts put into it, around 3k he said. I have handed it over to my tech who has stripped and fixed a chewed up wire and he confirmed it has had a lot done to it (Titan NGRS, prometheus gears, high torque motor etc) but maybe not quite 3k (but could be) Here lies my problem, I'm interested in potentially selling it to fund some repairs on my car, but I do not have a definitive list of upgrades as they were on the friends old phone he does not have access too it anymore, I don'…

Hi lads Im feeling the itch to move this on Still boxed 5 mid caps 2 new Lipo’s recently added Zenit style lower hand guard, vert grip, charging handle, and steel muzzle break Original parts with it to return to standard Chucks .28’s the way a TM is expected to go so Has some signs of use, but never abused What’s a sensible value for it? Am i miles off expecting circa £350 for it?

Make/brand: Tokyo marui Any accessories included: silencer, flashlight, hard case, attachment point Any one know what these are going for? Talking about the resident evil 7 limited edition, not the model 01p

Make: tm Gun/Model: biohazard dezart eagle Accessories: original hard case kimpoi grips Condition: good FPS: yes Pictures: yes Looking to price check this original tm biohazard dezart (yes it has that on the side) eagle comes with wood kimpoi grips (I never got the original grips when I purchased it and hard case Mag is gas tight

Make/brand: TM Biohazard Sentinel 9 Leon Any accessories included: As new in box, almost flawless, only mark apart from wear on the box sleeve is the line on the magazine from wear going in and out of the pistol a few times. Unskirmished and not fired a BB in anger. I know what these cost and have an idea of what I want for it as I think they were made in low numbers but couldnt find any examples of sales so do not have a baseline to go from before I list it!! Pictures:

Hi! I've got a Marui Breacher which been taken apart about 10 times by me spent 2 months at my tech after and still only shoots 3 BB can't switch to 6. Can't figure it out researched the whole internet and I just gave up by now. ? Obviously in this case I wouldn't say it's boneyard because it's functional but it's not capable of shooting 6 bb's. So what would be the the reasonable price for it? It has an Angry Gun Gas Tank Stock which isn't in production anymore and that alone used to be 150 quid. I've got about 10-12 marui shells on top it. Is 220 would be taking the piss? Thank you.

Hi folks, I've gone over to GBBR and just don't see myself using the Devgru again, hadn't used it at any game days well before lockdown kicked in and just seems daft to hold onto it and let it gather dust. If it was just a stock Devgru I'd advertise at the usual 50%-70% retail and hope for the best, but due to the nature of the extensive upgrades and Gucci mid-caps - I'm genuinely at a loss as to where to come in at an asking price (that would be fair on both myself and a potential buyer) TM HK416 'Devgru' approx 2 years old. Few minor cosmetic marks from skirmishing, but generally excellent condition. Approx 340 fps (with .20…

Asking advice as I don't want to rip anyone off neither do I want to sell for less than its worth. Everything is on the picture below. Thanks.

Make/brand: Tokyo Marui Any accessories included: possibly clone Aimpoint ACRO Other than the sight, gun is completely standard. Those who have seen the Rit dye thread will know I bollocked up the original frame, this is a complete, new, lower I imported from Japan. Only ever dry fired a few times, never had a bb through it. Pictures:

Make/brand: Tokyo Mauri Any accessories included: some custom work by AP customs. 6 mags and a scope no case as my tm 416 and vsr currently live in it! last checked 280 FPS. Had it 4 years never used it! Owned this for 4 years now and I have not used it apart from back yard plinking! 4 mid cap 2 high cap without the base plates. some custom work acp? Good? I think was an established company, barrel spacers and lengthened barrel. looks like someone spent some coin on this and I know what it cost me! Needs a loving home! 100% working if you want to come test it please do. Pictures: …

How much, do you think, a tm g17 gen 5 would go for in the uk now that glock have blocked the imports and they are out of stock? ( I have one with the original box, with light use) not sure if it’s worth selling if they’ve become sort after

Team hive mind, Just bought a boneyard TM G17, I’m keeping the internals but selling the frame, slide and outer barrel, plus a perfect, brand new TM frame. New frame is completely standard, below is the boneyard frame & slide, been stippled. Do we think 40-50% new value?

Hey all, Not sure I want to part with this, but as I’ve just got a G19 I feel obligated to do so! Was wondering what it would be worth? TM G17 Guarder Enhanced Full kit 2 Gas tight magazines 1 leaking magazine (gas hisses from around the fill valve - I think just an o ring?) very lightly used, have fired maybe 4-6 magazines through it and the obligatory cocking and playing with in the house. Cheers!

Make/brand: tm g3 Any accessories included: Extra mag Pictures:

Original g3 app custom works printed on left hand side of receiver! shoots 270 nothing special, other than the distance! 4 mid cap mags bi pod! clamp and scope not in pics! 2 x hi cap mags, 1 missing base plate but fully functional. Works like a Tm, modified by a bellend! But being honest some black tape could cover it as the scope leaves 30/40 mm! this is a retro working hero so accurate it’s unreal’ Let me know or I will keep it until it becomes history!

TM G3 SG/1 old and untouched for quite some time, TM MC51 ( with solid stock ) fairly old and also untouched for some time, 4 hicaps, 2 lowcaps, a sling, a TM scope mount for the G3 ( with a scope that is missing some of the clamps ) and a few NIMH batteries. Any ideas? What's one up from the boneyard?

Make/brand: Tokyo Marui (Stock) Any accessories included: 1 x high cap 5 x midcap 1 x low cap 2 x Tomtac 7.4V Lipos 3 x Twin Mag Pouches 3 x Talon Stratagem Fastmag holders (one has cosmetic corner chip, see picture) 1 x single point sling 1 x Short Verticle grip Pictures:

TM G36K/E NGRS currently set up with a H&K E foregrip modified to accept a lipo battery,has barrel extension with E flash-hider. IDZ flat top rail and stock. The original K furniture is in the case along with various mags ( hi cap ones i think) Stock internals, but the range on it is impressive. Any idea's as to its value as a whole ?

Make/brand: tm g36k Any accessories included: ag36 Extra mag and four grenade shells Pictures: