r1flyguy Posted May 1 Share Posted May 1 Loving my TM MP5 SD6 but thought I needed to just add a bit of furniture to tart it up so purchased a ASG Airsoft MP-5 G3 Series High Scope Mount in Black, in the hope it locks on securely. Arrived quickly, fitted easily and attached my also recently purchased Vector Optics ‘Frenzy’ red dot. Looks ok me thinks… Jacob Wright, GothicGhost and ButcherBill 3 Link to comment Share on other sites More sharing options...
MrTea Posted May 4 Share Posted May 4 (edited) Was updating some of my sales posts when I saw this pop up for collection only in my town. The guy was 10 minutes away. It's the G&G ETU version as well which is a nice surprise and rotary hop already installed. Rifle has an issue where every 3/4 shots it sounds like it's grinding the gears. I can see a some black plastic bits on the outside of the gearbox which could be the all plastic piston being shredded up which is what happened on my standard L85A2. The seller suspects it's actually the motor that's giving up. When I get some time, i'll pull it apart but for now, very happy. Edited May 4 by MrTea Tackle, ButcherBill and JDM96 2 1 Link to comment Share on other sites More sharing options...
johnnyj Posted May 4 Share Posted May 4 Helping a fellow player out today and spotted these very crusty clone #22s , during the conversation he said he was binning them for another set of mounts. I paid for his new mounts and now need to clean them up 🤣 sucker for anything mk12 related. ButcherBill and TheFull9 2 Link to comment Share on other sites More sharing options...
Anonymoose Posted May 5 Share Posted May 5 (edited) On 29/04/2025 at 20:39, Colin Allen said: I bought this at AP on Sunday, having admired it in the site shop for a while. It is currently in bits on the work table and will soon have a new hop rubber and nub, a Perun Hybrid and 13:1 gears so that I can run it on a 2000mAh 7.4v battery that just about fits in the handguard. Those short triangular handguards look so cool. 👌🏻 Edited May 5 by Anonymoose Removed the echo.. Colin Allen 1 Link to comment Share on other sites More sharing options...
Colin Allen Posted May 5 Share Posted May 5 15 minutes ago, Anonymoose said: Those short triangular handguards look so cool. 👌🏻 Those short triangular handguards look so cool. 👌🏻 So cool that you felt moved to say it twice :). I took it to Splatoon this morning to set it up while selling stuff at their boot fair; it shoots beautifully now, which was not the case when I first got it. Anonymoose 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted May 5 Share Posted May 5 4 minutes ago, Colin Allen said: So cool that you felt moved to say it twice Sorry, there must be an echo in here. 🤔 I remember seeing a Marui one in a (paper) catalogue about 25 years ago, i've wanted one since then. 4 minutes ago, Colin Allen said: I took it to Splatoon this morning to set it up while selling stuff at their boot fair; it shoots beautifully now, which was not the case when I first got it. I'll have to give Splatoon a try some time, it seems to get good reviews from other players. Colin Allen and TheFull9 2 Link to comment Share on other sites More sharing options...
Colin Allen Posted May 5 Share Posted May 5 (edited) 19 minutes ago, Anonymoose said: Sorry, there must be an echo in here. 🤔 I remember seeing a Marui one in a (paper) catalogue about 25 years ago, i've wanted one since then. I'll have to give Splatoon a try some time, it seems to get good reviews from other players. The site itself is rather good and interesting, but game design can be somewhat variable. I play there maybe once every couple of months. Let me know if you decide to go there. Edited May 5 by Colin Allen Anonymoose 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted May 5 Share Posted May 5 After trying to make my own from scratch, with limited success, i gave in and bought the AngryGun KAC silencer with flash/tracer inside. I'll still salvage my attempt and use it on something. ButcherBill and TheFull9 2 Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted May 6 Moderators Share Posted May 6 13 hours ago, Anonymoose said: After trying to make my own from scratch, with limited success, i gave in and bought the AngryGun KAC silencer with flash/tracer inside. I'll still salvage my attempt and use it on something. What tracer fits in the AG KAC can as I've got one too Link to comment Share on other sites More sharing options...
GiantKiwi Posted May 6 Share Posted May 6 15 minutes ago, Jez_Armstrong said: What tracer fits in the AG KAC can as I've got one too Acetech Blaster M module is what they come with. Anonymoose 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted May 6 Share Posted May 6 1 hour ago, Jez_Armstrong said: What tracer fits in the AG KAC can as I've got one too 1 hour ago, GiantKiwi said: Acetech Blaster M module is what they come with. As Kiwi said, the Acetech Blaster M. I've tried to buy one before and they're out of stock everywhere except Evike US and some place in Italy. I'll see what others fit when it arrives. Jez_Armstrong 1 Link to comment Share on other sites More sharing options...
Skara Posted May 7 Share Posted May 7 - Invader Gear short sleeve combat shirt in a-tacs fg - 5KU (i know, it's shit) PT6 something AR stock adapter for my Cyma AK - Bit kit for my leatherman wave+ (not for Airsoft, it was on discount and couldn't let it go) Next will be a helikon 2 piece belt for work, so i can strap some pouches on it. ButcherBill 1 Link to comment Share on other sites More sharing options...
Mik3F Posted May 7 Share Posted May 7 Some mini tamiya to deans adaptors so I can use my Deans batteries whilst waiting for my gun to be fixed ButcherBill 1 Link to comment Share on other sites More sharing options...
Mik3F Posted May 7 Share Posted May 7 (edited) Another Rifle Edited May 7 by Mik3F ButcherBill and Galvatron 2 Link to comment Share on other sites More sharing options...
Mik3F Posted May 7 Share Posted May 7 A Molle pistol holster in ranger green ButcherBill 1 Link to comment Share on other sites More sharing options...
MrTea Posted May 10 Share Posted May 10 I've had a bit of good luck in finding RIFs I want at a real discount. In addition to the L22 Carbine I managed to snap up a couple of days ago (see further up) I also found a guys ICS L86A2 LSW on an absolute steal. He says the FPS is low so it could be a quick service job but performance overall is pretty poor as it has no ETU and all internals are stock. ButcherBill, ruskitseller, Jacob Wright and 1 other 3 1 Link to comment Share on other sites More sharing options...
Mik3F Posted May 10 Share Posted May 10 An Amarok 250 rnd mid cap mgazine (as my specna doesnt like my EPM one) and a Kombat UK Holster ButcherBill 1 Link to comment Share on other sites More sharing options...
Baser Posted May 10 Share Posted May 10 More open top viper mag pouches to go on my belt as I was sweating buckets under my chest rig last week. 2x 1100 mah 11.1v batteries and a 1 point sling as I am taking a mate to airsoft for the first time tomorrow so need to be able to field both guns at the same time instead of choosing between them. ButcherBill 1 Link to comment Share on other sites More sharing options...
Mik3F Posted May 10 Share Posted May 10 An Amorex style G series holster and Mag holder for my SSP18 Link to comment Share on other sites More sharing options...
Popular Post Spartan09 Posted May 10 Popular Post Share Posted May 10 so, i have been neglecting to post updates for the past few months, so i will blast them all in one post.... i bought a laylax thread adapter to fit on my KWA beretta M93r from firesupport. (thank you @strykerles for the link). only downside is the threads are 14mm clockwise, and tracers are 14mm counter clockwise threads, but i was able to make an acetech fit through brute force XD then i bought the Umarex walther PPK and 2 spare mags from landwarrior and a Crusader silencer form airsoftworld to go with it along with it. currently trying to figure out a way to mount a tracer in the silencer without the inner barrel poking through and preventing tracer working (and without taking a hacksaw to it so i can use it without tracer at a later date if i choose) had to buy a new gun at AI500 in Flambards after i took a tumble and managed to snap my KWA Skorpion in two... so i bought the KWA Mac11 with spare mags... and it was the only gun i had with me at the event that didnt malfunction constantly.=/ i also bought a G&G ESG10 from my local surplus shop (who also sells some airsoft gear) for use at AI500, expecting more close quarters battles than i actually encountered, so it didnt get a lot of use.. plus i found the mag release is way too sensitive. whenever i had it slung on my back as a backup, it would constantly drop the mag, so it was mostly left at respawn to be used as needed, but i ended up just running the mac 11 all weekend after getting home from AI500, i bought a new reciever for the Skorpion from BZtactical, and have swapped the internals from the broken Skorpion, but now it needs fettling as i cant get the trigger to reset, and the valve knocker is sticky, so it wont fire at the moment =/ a shame, as i loved the little Skorp... evil little beastie deciding i wanted to display my guns, and consign many of the boxes to the loft, i bought a bunch of hookwall panels, brackets and hooks, which my brother and i mounted on the wall in my living room over the bank holiday weekend. need to order some different sized hooks and get another wall mount brracket as somehow had one missed out of my order, but they have been helpful when i contacted them. all bought from unishop.co.uk finally, i bought a WE Apache A5 from onlyairsoft along with a claw mount and 6 spare mags. to complete it, i bough a cheap red dot scope from Amazon and then a collapsible stock from KYairsoft which arrived today. hoping to run this tomorrow for the first time no pics at the moment as i cannot crop them down to meet the forum file size limits, and fed up of hosting the images from discord, only for them to stop working after a couple of days... strykerles, ButcherBill, Baser and 2 others 3 2 Link to comment Share on other sites More sharing options...
Mik3F Posted May 11 Share Posted May 11 A Hoodie and Baseball Cap to support one of the sites I play at ruskitseller 1 Link to comment Share on other sites More sharing options...
Cannonfodder Posted May 12 Share Posted May 12 A TM MP7 with spare mag, replica 552 eotech and a nuprol nx600s weapon light. All except the eotech were from white sphere tactical as I was playing at Blackstone cqb yesterday. It might just be a case of new pew syndrome but its already becoming one of my favourite guns Tackle 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted May 12 Share Posted May 12 2 hours ago, Cannonfodder said: A TM MP7 with spare mag, replica 552 eotech and a nuprol nx600s weapon light. All except the eotech were from white sphere tactical as I was playing at Blackstone cqb yesterday. It might just be a case of new pew syndrome but its already becoming one of my favourite guns I should of put mines up for sale earlier, lol. Link to comment Share on other sites More sharing options...
Anonymoose Posted May 12 Share Posted May 12 1 hour ago, ButcherBill said: I should of put mines up for sale earlier, lol. I don't like this new ButcherBill who keeps selling guns. 🤨 ButcherBill, Cannonfodder and Tackle 1 2 Link to comment Share on other sites More sharing options...
ButcherBill Posted May 12 Share Posted May 12 1 hour ago, Anonymoose said: I don't like this new ButcherBill who keeps selling guns. 🤨 A drop in the ocean M8. Needs must so I can buy more kit once the HMRC has got their twatting 'fist' out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now