Jump to content

Show me your abominations


Brokencreation
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I want to see your most scuffed or out there custom stuff you or someone made for you :D here are mine. Oil filter ak’s and 3D printed body kits galore with cheap Chinese mosfets, they work most of the time  my faves is the mp5 swordfish that uses RC batteries and tacticool l85s. My best gun is my modded ghk g5 though it’s just always worked. My office is a bit of a perpetual flow between messy and tidy  :,)

B90B1B4F-2DF7-4EE5-A3B7-89BD445E8050.jpeg

54025B2A-1DBF-4F88-9E96-0FB0CEA06328.jpeg

3DB2D1D3-E013-458A-B99D-DB94E364938C.jpeg

88118583-5A2F-4FFF-8D3D-F0AFE99207C4.jpeg

16DABEE0-E1CE-4DA3-AA83-4FA6E577FB0D.jpeg

20944E78-50F8-4545-8E4F-CFE0059BD33B.jpeg

01E69736-3779-4791-B71A-5FDC6180EA90.jpeg

B42074C0-398C-4FCC-AD07-BADF0E6EAA61.jpeg

98E26F3F-681B-4178-B952-FE15C20112B4.jpeg

2032A806-4D87-402A-BFD8-C152F6A3C3C6.jpeg

Edited by Brokencreation
Spelling error
Link to comment
Share on other sites

I don't think I have any, got some two tones hiding in a box tho... we don't talk about the blue one's.

Link to comment
Share on other sites

10 hours ago, Brokencreation said:

20944E78-50F8-4545-8E4F-CFE0059BD33B.jpeg

 

I actually kinda like this. Nice MP9 by the way, is that the suppressor with or without the barrel extention?

Link to comment
Share on other sites

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

g35-2__87933.jpg

Link to comment
Share on other sites

1 hour ago, gavinkempsell said:

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

g35-2__87933.jpg

That is fugly! No amount of rattle cans will make it right😂

 

(The views of one person is not representative of the views of others)

 

It's still fugly.......😉

 

Regards 👍

 

Link to comment
Share on other sites

25 minutes ago, Shamal said:

That is fugly! No amount of rattle cans will make it right😂

100% correct, & that's why it's never left the box.

 

I'm a tight Scotsman so I still have it.

Link to comment
Share on other sites

  • Moderators
21 minutes ago, gavinkempsell said:

100% correct, & that's why it's never left the box.

 

I'm a tight Scotsman so I still have it.

You've just got to mount on MUCH MUCH longer clips, no one will ever know😜

download (45).jpg

Link to comment
Share on other sites

  • Supporters

Made a couple abominations in my time:

IMG-20200521-WA0006.thumb.jpeg.95db1819a9b42e88a6faa1a04d5122ee.jpeg

 

Yes that's an m249 box mag on an mg42, no i will not elaborate further.

 

IMG-20200715-WA0005.thumb.jpeg.45ccdffb0cd04bcbe5763ee87dc14ce8.jpeg

 

And this monstrousity puts a new meaning to the term "bore offset", forget a cheek weld or even a chin weld you couldnt even get a beard weld.

 

And whilst the gun might have been a superb shooter with bb's flying as straight and true as you can realistically get in this hobby, it doesnt help when the optic isnt zeroed, you cant really get in the eyebox due to its position but thats fine because even if you could its a gen 1 so you can't see shit anyway.

 

However with a red dot in daylight as ugly as that gun is it was a great thing to actually use.

 

Tried to get a picture of what i lovingly called the "scaffolding pole" due to its resemblance to, well, a scaffolding pole welded onto an m4 reciever, another one of those looks like shit shoots like a dream builds, alas i could not find one.

Link to comment
Share on other sites

3 hours ago, MrTea said:

 

I actually kinda like this. Nice MP9 by the way, is that the suppressor with or without the barrel extention?

without. I have bodged a tracer unit into it though 

2 hours ago, gavinkempsell said:

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

g35-2__87933.jpg

big oof 

6 minutes ago, Adolf Hamster said:

Made a couple abominations in my time:

IMG-20200521-WA0006.thumb.jpeg.95db1819a9b42e88a6faa1a04d5122ee.jpeg

 

Yes that's an m249 box mag on an mg42, no i will not elaborate further.

 

IMG-20200715-WA0005.thumb.jpeg.45ccdffb0cd04bcbe5763ee87dc14ce8.jpeg

 

And this monstrousity puts a new meaning to the term "bore offset", forget a cheek weld or even a chin weld you couldnt even get a beard weld.

 

And whilst the gun might have been a superb shooter with bb's flying as straight and true as you can realistically get in this hobby, it doesnt help when the optic isnt zeroed, you cant really get in the eyebox due to its position but thats fine because even if you could its a gen 1 so you can't see shit anyway.

 

However with a red dot in daylight as ugly as that gun is it was a great thing to actually use.

 

Tried to get a picture of what i lovingly called the "scaffolding pole" due to its resemblance to, well, a scaffolding pole welded onto an m4 reciever, another one of those looks like shit shoots like a dream builds, alas i could not find one.

Wont elaborate further, gigachad moment 

5 hours ago, Tackle said:

images (69).jpg

NO! my house is nice and tidy this is the only space i can make messy and not feel bad 

Link to comment
Share on other sites

15 hours ago, Brokencreation said:

Vorpal Bunny AM.45

 

Is it even a real abomination if you don't hack it up a bit? ARMY Armament R45 "V6", customised with "V6" barrel porting and slide cuts, custom-milled mount for ACM Shield RMS, and a Nova trigger. Since these photos were taken it got an ARMY magazine release that's closer to the VB one, and I've flattened the grips. Still needs a new hammer, a dust cover rail, and battleship grey paintjob.

 

CFEUMed.jpg

 

ZtxUb8o.jpg

 

zuljOR9.jpg

Link to comment
Share on other sites

28 minutes ago, PureSilver said:

 

Is it even a real abomination if you don't hack it up a bit? ARMY Armament R45 "V6", customised with "V6" barrel porting and slide cuts, custom-milled mount for ACM Shield RMS, and a Nova trigger. Since these photos were taken it got an ARMY magazine release that's closer to the VB one, and I've flattened the grips. Still needs a new hammer, a dust cover rail, and battleship grey paintjob.

 

CFEUMed.jpg

 

ZtxUb8o.jpg

 

zuljOR9.jpg

 takes notes)

Link to comment
Share on other sites

How about this? Posted on a FB group with the question hot or heresy?

Screenshot_2023-10-20-19-51-59-616.jpg

Link to comment
Share on other sites

On 20/10/2023 at 19:53, Jaylordofwaargh said:

How about this? Posted on a FB group with the question hot or heresy?

Screenshot_2023-10-20-19-51-59-616.jpg

oooooo errryyy noiceeeee

On 19/10/2023 at 07:39, Scythian said:

Would this count? It's a Glock 17 that put on a bit of weight😀20231011_140134.thumb.jpg.890f302172490d44e78186b0b54a718d.jpg

ugly yet sexy 

Link to comment
Share on other sites

  • 2 weeks later...

My VFC BCM firing cycle too slow and is a little off range, so I'm going to replace it with a 6.01mm inner barrel

029d2ee993c1c1ea5308374b9b15c52.jpg

Link to comment
Share on other sites

  • Moderators
10 minutes ago, Miêu Anh-Nguyễn said:

My VFC BCM firing cycle too slow and is a little off range, so I'm going to replace it with a 6.01mm inner barrel

029d2ee993c1c1ea5308374b9b15c52.jpg

That's an abomination how exactly ? 

Link to comment
Share on other sites

36 minutes ago, Tackle said:

That's an abomination how exactly ? 

There's one more thing that's hard for me to accept. BCM hop-up adopts a new adjustment method, which is adjusted directly on the airway, but due to the unstable structure, after shooting 5-7 magazines in a row, it will return to zero due to vibration, making the trajectory become a parabola.

Link to comment
Share on other sites

On 19/10/2023 at 08:39, Scythian said:

Would this count? It's a Glock 17 that put on a bit of weight😀20231011_140134.thumb.jpg.890f302172490d44e78186b0b54a718d.jpg

 

This looks so wrong 😂

Link to comment
Share on other sites

  • 2 months later...

Been sitting in pieces for ages awaiting my motivation...

 

Used to be a cheap Two Tone springer ((c) we don't talk about the blue one), got some 'DPM' stensils from freedomestencils back in October and finally used them.

 

Would I buy them again? yes but shipping was £££ so probably not for that reason.

Do I like the end result? yes but I lack the patience to do a proper job (some blue peeking through the paint where the stencil took off some base layers)

 

Still got some stencils left so I feel a Two Tone Scar-L will get similar treatment but with a bit more green in the mix, and possibly a lacquer finishing layer as the scar is likely to be used at some point.

 

m82.jpg

m822.jpg

m823.jpg

m824.jpg

Edited by gavinkempsell
Link to comment
Share on other sites

  • Moderators
On 06/01/2024 at 09:34, Alimcd said:

I know I bring this one out whenever one of these threads appears but…

 

Based on a real gun, if you stormed Omaha beach without dying, in 10 minutes and with 20 kills back in 1944 you’d be able to equipment this chrome and carbon monstrosity when you next saw your quartermaster.

IMG_7590.thumb.jpeg.a85eb4cc5c3c45ce5301a2c0fa6c9a37.jpeg

Built to try and tempt the wife into playing, she had said she wanted something that looked like it was from Borderlands. She ended up refusing to play and this got sold on…. IMG_8102.thumb.jpeg.9991e67f2553e2a13326ffff6ccafda2.jpeg
 

King Arms Chrome receiver set and hydro dipped furniture. The icing on the upsetty-spaghetti for a real purist is that I cut the ears off the rear sight and drilled it to be a mounting fixture for the mini red dot

You whip it out as often as you like Ali, I still gaze at it longingly 😘

 

I should have bought it when I had the chance🤬

Link to comment
Share on other sites

  • 3 weeks later...
On 11/01/2024 at 15:07, BenJackson said:

Why yes I enjoy ergonomics, how could you tell?

20240106_234859.jpg

Oh my god it is so ugly i love it

 

On 06/01/2024 at 00:19, gavinkempsell said:

Been sitting in pieces for ages awaiting my motivation...

 

Used to be a cheap Two Tone springer ((c) we don't talk about the blue one), got some 'DPM' stensils from freedomestencils back in October and finally used them.

 

Would I buy them again? yes but shipping was £££ so probably not for that reason.

Do I like the end result? yes but I lack the patience to do a proper job (some blue peeking through the paint where the stencil took off some base layers)

 

Still got some stencils left so I feel a Two Tone Scar-L will get similar treatment but with a bit more green in the mix, and possibly a lacquer finishing layer as the scar is likely to be used at some point.

 

m82.jpg

m822.jpg

m823.jpg

m824.jpg

cannot go wrong with big pewpew

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...