Moderators Tackle Posted January 22, 2021 Moderators Share Posted January 22, 2021 It's like an ugly baby, only it's mother could love it 🤮 7 minutes ago, Spartan09 said: I did knock together a bb trap target for my back garden, so i can do some shooting during lockdown to relieve a bit of boredom... I know it doesnt look like much, it was quickly knocked together from some cheap timber so that if required i can quickly pull it apart and store it in pieces between my shed and fence without faffing around with complex fastenings etc... plus the simple construction allows me to make quick repairs if needed.... A bit of wire across the opening allows me to hang paper targets, or i can put knock-down targets inside the trap I am adding more padding inside the target though, as i did get a couple of ricochets during test shots, so until i have the appropriate materials to hand i wont be using it again. Its a Charlton rifle, made by the australian and new zealand armies in early ww2 due to issues getting brens from britain, and a huge surplus of lee enfield rifles from ww1... Stratton Oakmont and Spartan09 2 Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted January 22, 2021 Share Posted January 22, 2021 11 minutes ago, Tackle said: It's like an ugly baby, only it's mother could love it 🤮 That charlton, It would have to be a baby Sloth. Tackle 1 Link to comment Share on other sites More sharing options...
Spartan09 Posted January 22, 2021 Share Posted January 22, 2021 12 minutes ago, Tackle said: It's like an ugly baby, only it's mother could love it 🤮 it is ugly, and its definately not my finest work... but its functional enough.... but as said above, it is still a work in progress i intend to spend a LOT of time and care in designing and building the charlton though... but before i can begin esigning it, i need to figure out what gun im going to use as a base, and then take some detailed measurements of the internals to scale the externals appropriately. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 22, 2021 Supporters Share Posted January 22, 2021 1 hour ago, Tackle said: & The gun in question is ? i was gonna say charlton 1 hour ago, Spartan09 said: Its a Charlton rifle, made by the australian and new zealand armies in early ww2 due to issues getting brens from britain, and a huge surplus of lee enfield rifles from ww1... but unfortunately it's now too late for me to claim that i called it..... it's an intesting proposition, you can't just do the normal gbbr trick of not having a locking mechanism as it's external, i wonder if you'd almost need 2 gas supplies- one in the mag to fire and one in the "gas tube" to operate the cycling. it'd probably be awful to skirmish but goddamn would it command respect and admiration. Link to comment Share on other sites More sharing options...
Spartan09 Posted January 22, 2021 Share Posted January 22, 2021 7 minutes ago, Adolf Hamster said: you can't just do the normal gbbr trick of not having a locking mechanism as it's external if you are referring to the rotating bolt on the real steel gun, then i was probablt going to make it as a solid piece that only LOOKS as though it functions as a rotating bolt. i was hoping to get away with running it as an open bolt, similar to the northeast sten. to run GBB AK mags... or try and either route a gas feed from a CO2 canister in the stock (like a tippmann omega) or an HPA line through the grip and use AEG hi caps. but until i get my hands on a base gun, i wont know what modification options i will have at my disposal and im sure it would be a bit of a nasty bastard to run, but it would definately be something unique and different on the fields =P Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 22, 2021 Supporters Share Posted January 22, 2021 32 minutes ago, Spartan09 said: if you are referring to the rotating bolt on the real steel gun, then i was probablt going to make it as a solid piece that only LOOKS as though it functions as a rotating bolt. i was hoping to get away with running it as an open bolt, similar to the northeast sten. to run GBB AK mags... or try and either route a gas feed from a CO2 canister in the stock (like a tippmann omega) or an HPA line through the grip and use AEG hi caps. but until i get my hands on a base gun, i wont know what modification options i will have at my disposal and im sure it would be a bit of a nasty bastard to run, but it would definately be something unique and different on the fields =P it's a tricky one. an enfield base would mean having to fabricate an entire blowback mech, but would make the external/visual modifications comparitively easy. possibly an m14? it's at least setup to have a mock rotating bolt to it. Link to comment Share on other sites More sharing options...
AK47frizzle Posted January 22, 2021 Author Share Posted January 22, 2021 4 hours ago, Tackle said: The OP, @AK47frizzle is actually in the trials process with his own design of Airsoft gun, he'd probably be the best person for advice, assuming your design isn't too much like his, then he might rightly tell you to feck off 🤣 Ye i'm mostly catching up with people to get their final reviews of the first test. The model the 2nd test is almost done, just need to refine the selector and allow compatibility with mp5 hi caps: https://gyazo.com/8b80fc4a99738cec16102413aa3fdb7f On the side, i'm working on a modern tec 9 to fit on an m4 (was originally an actual tec9 upper for an m4 as a commissioned piece but i'm decking it out more): https://gyazo.com/565d9a13529844461da1224237ad09ff Tackle 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted January 22, 2021 Share Posted January 22, 2021 Picked up a king arms sig 556 recently. I love how the real rifle looks. Unfortunately the king arms looked like this So I have been spending my time today, grinding and filing down an ics sig folding stock block and its getting there finally. Already swapped out that massive handguard for a rail system. Adolf Hamster and Pappa Large 1 1 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 23, 2021 Supporters Share Posted January 23, 2021 Good work brother, the pervasive fitting of m4 stocks onto not m4's is a plague that needs stopped at every opportunity. alxndrhll and PopRocket123 2 Link to comment Share on other sites More sharing options...
PopRocket123 Posted January 23, 2021 Share Posted January 23, 2021 51 minutes ago, Adolf Hamster said: Good work brother, the pervasive fitting of m4 stocks onto not m4's is a plague that needs stopped at every opportunity. Tbf sometimes it's an improvement Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 23, 2021 Supporters Share Posted January 23, 2021 Nope. I actually preferr the ugg boot. But then i dont like the extended rails on scars and i seem very much in the minority on that too. Link to comment Share on other sites More sharing options...
HuttArmouries Posted January 23, 2021 Share Posted January 23, 2021 12 hours ago, PopRocket123 said: Tbf sometimes it's an improvement I prefer the original stock. And maybe the scar 20 stock PopRocket123 and Adolf Hamster 2 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 23, 2021 Supporters Share Posted January 23, 2021 18 minutes ago, HuttArmouries said: I prefer the original stock. And maybe the scar 20 stock see now that works, plus you still get the proper folding action. would rather a 20-rounder in it though. Link to comment Share on other sites More sharing options...
Stratton Oakmont Posted January 23, 2021 Share Posted January 23, 2021 14 hours ago, Adolf Hamster said: Good work brother, the pervasive fitting of m4 stocks onto not m4's is a plague that needs stopped at every opportunity. The video I posted offended me with an m4 style stock on an as val i also like the ugg boot stock and prefer the aesthetic of the cqc Link to comment Share on other sites More sharing options...
HuttArmouries Posted January 23, 2021 Share Posted January 23, 2021 The buffer tube removal is complete. now it just needs a bit of cleaning up and some paint. Jaylordofwaargh, Adolf Hamster, PopRocket123 and 1 other 4 Link to comment Share on other sites More sharing options...
Danger_MouseUK Posted January 24, 2021 Share Posted January 24, 2021 So Day 1 of isolation, and day 10000000000 or something of lockdown in general, and I'm board. Whilst waiting for my new project rifle to come, and under orders not to spend any more money, I got jealous of the way real-steal ammo comes in nice neat boxes while we get ours in bottles and bags. Khyber, B4by_Dr1v3r, TheFull9 and 1 other 3 1 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 24, 2021 Supporters Share Posted January 24, 2021 wait, you made a bunch of cardboard ammo boxes? that's both weird and cool in equal measure Khyber 1 Link to comment Share on other sites More sharing options...
Danger_MouseUK Posted January 24, 2021 Share Posted January 24, 2021 1 hour ago, Adolf Hamster said: wait, you made a bunch of cardboard ammo boxes? that's both weird and cool in equal measure I know right! Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 24, 2021 Supporters Share Posted January 24, 2021 3 minutes ago, Danger_MouseUK said: I know right! not sure geoffs branding works in box form though, looks kinda medicinal. i mean it is medicinal but not for the person using them Link to comment Share on other sites More sharing options...
Spartan09 Posted January 25, 2021 Share Posted January 25, 2021 On 22/01/2021 at 17:34, Adolf Hamster said: , you can't just do the normal gbbr trick of not having a locking mechanism as it's external what do you mean by that adolf? not going to lie, but i dont have a great deal of knowledge when it comes to the finer points of GBB mechanisms 3 hours ago, Adolf Hamster said: looks kinda medicinal. lol, at first glance when scrolling past, i thought they were medicine boxes.... Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 25, 2021 Supporters Share Posted January 25, 2021 1 hour ago, Spartan09 said: what do you mean by that adolf? not going to lie, but i dont have a great deal of knowledge when it comes to the finer points of GBB mechanisms I mean that because a lot of guns have locking mechanisms that aren't very visible in operation, the gbbr version doesn't need to have any mechanism to replicate it. Hence mentioning the m14 as one of the main exceptions from the top of my head because the fake bolt has to rotate. Compared to the charlton where the whole point is you can see everything moving in a symphony of steampunk awesomeness Link to comment Share on other sites More sharing options...
Spartan09 Posted January 25, 2021 Share Posted January 25, 2021 9 hours ago, Adolf Hamster said: I mean that because a lot of guns have locking mechanisms that aren't very visible in operation, the gbbr version doesn't need to have any mechanism to replicate it. Hence mentioning the m14 as one of the main exceptions from the top of my head because the fake bolt has to rotate. Compared to the charlton where the whole point is you can see everything moving in a symphony of steampunk awesomeness ah.... im with you now. TBH im not too fussed if the bolt doesnt rotate, im more focussed on the bolt blowing back and returning.. and not blowing back into my face XD once i get into the project fully, and i have a base gun, i can try and work out wether i can make the rotating bolt, or just have to stick to a straight gbb Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 25, 2021 Supporters Share Posted January 25, 2021 6 minutes ago, Spartan09 said: ah.... im with you now. TBH im not too fussed if the bolt doesnt rotate, im more focussed on the bolt blowing back and returning.. and not blowing back into my face XD once i get into the project fully, and i have a base gun, i can try and work out wether i can make the rotating bolt, or just have to stick to a straight gbb tbh i'd view it as the most inviting challenge to do it properly and have the mechanism rotating and blowing back. the issue really is how to get the blowback to push the action rod back, hence thinking perhaps having the mechanism inside the gas tube, not sure on the diameter but maybe you can get a single co2 cartridge in there, or have the thing as a big gas reservoir. Link to comment Share on other sites More sharing options...
Spartan09 Posted January 25, 2021 Share Posted January 25, 2021 (edited) 11 hours ago, Adolf Hamster said: tbh i'd view it as the most inviting challenge to do it properly and have the mechanism rotating and blowing back. the issue really is how to get the blowback to push the action rod back, hence thinking perhaps having the mechanism inside the gas tube, not sure on the diameter but maybe you can get a single co2 cartridge in there, or have the thing as a big gas reservoir. inviting indeed. though looking at more pics of the real steel gun, it looks like there is a simple lug on the bolt that runs in a groove of the charging handle mechanism, so it may be a bit easier to make a rotating bolt.. but again, until i have a base gun to work with, its rather immaterial... talking of materials, what materials are GBB bolts usually made of? was wondering if it would be possible to contact an engineer or gunsmith to have a lug welded on, or if its fairly simple to get a custom bolt made with a lug already built in.. EDIT perhaps it would be better to set up a seperate chat to discuss the charlton, to save clogging up the "what have you built" thread Edited January 25, 2021 by Spartan09 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted January 26, 2021 Supporters Share Posted January 26, 2021 Yeah maybe a dedicated project thread might be better. As for materials as with all airsoft guns "chinese pot metal" is the safest assumption so welding is probably gonna be tricky. Cant recall the charlton specifically but i thought it used the original bolt handle as a lug? Or am i thinking of one of the other conversions. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now