Supporters Lozart Posted March 17, 2014 Supporters Share Posted March 17, 2014 Your team callsign - it's "Gucci boy" isn't it? CaptainSwoop 1 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 17, 2014 Supporters Share Posted March 17, 2014 Other people only slow you down.. you get attached, then they die.. I work alone, ever since that time back in 'Nam... Sam_G, Ian_Gere, Lozart and 1 other 4 Link to comment Share on other sites More sharing options...
Adammd209 Posted March 17, 2014 Share Posted March 17, 2014 Monty 1 Link to comment Share on other sites More sharing options...
TacMaster Posted March 17, 2014 Share Posted March 17, 2014 No to rain on your parade mate, but you're gonna want to take another look at the upper part of that handguard. It's pretty evident from that picture it's quite a way from being fitted on properly. If you can post up a shot of the area where it meets the upper receiver (preferably from an angle looking down at the top of the rifle) we should be able to get that sorted. There's a couple of different copies of the KAC RAS and depending on how yours attaches will depend on the fix. But from that picture it almost gives the impression the entire unit might be on backwards, either that, your fastening bracket is in the wrong place, or the barrel nut/corresponding channel in the rail is way off spec. Sorry for late reply, didn't see this until yesterday. Here are some pics of the join, top down: My mate gave me these with the RAS as well: Anything significant about them aside from the crushed section of the barrel nut? Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted March 21, 2014 Supporters Share Posted March 21, 2014 apologies for the lack of a decent place to photograph it, but my new toy is about 90% complete. It needs a new stock (either CTR or Crane, undecided which) and of course a sling. Oh, and the LiPo batteries I have don't fit in the RIS at the moment, so I may need to get someone clever to sort that out for me (less wiring, smaller plugs etc). M4A1 SOPMOD Block 2; base gun is a Tokyo Marui M4A1 SOCOM recoil shock, madbull 12.5" RIS2 in DE, Specter DR (fixed 4x), element M3x long, vanaras PEQ15, generic foregrip and some ergo rail ladders. SgtTalbert, Airsoft_Mr B, Monty and 1 other 4 Link to comment Share on other sites More sharing options...
Supporters Monty Posted March 21, 2014 Supporters Share Posted March 21, 2014 Can't you wire it to the inside of the buffer tube? M4 Looks gorgeous. Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 22, 2014 Author Supporters Share Posted March 22, 2014 It's a tm recoil so the buffer tube is full of springs and a weight Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted March 22, 2014 Supporters Share Posted March 22, 2014 what M_P said, I'm sort of regretting going down the SOCOM route now in honesty, if I'd just ponied up the extra cash and got a SOPMOD wouldn't be having any of these issues! Have a possible solution in the offing.... as you can see the batteries fit without the lower half of the RIS being fitted, but it's kinda snug. the wiring is an issue that I'll have to sort but mostly it's just fitting the batteries in!So, the plan is to remove this material:That'll allow the batteries to sit as they are now in the gun, once the wiring is squared away it should be fine. Link to comment Share on other sites More sharing options...
Supporters M_P Posted March 22, 2014 Author Supporters Share Posted March 22, 2014 You have a PEQ on there, could you not just stick the battery in that? Mind you if that was an option I guess you'd have done it.You're right that its a bit if a downside to the socom but equally it does all you the choice of more than 3 different stocks so I think its worth the slight hassle of battery fitting. That said mine just has the stock hand guard atm, I may feel differently about it if I had a low profile rail on it. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted March 22, 2014 Supporters Share Posted March 22, 2014 yeah, PEQ is one option, but I'd like to be able to put a functional one on there, got some opinions coming through on various brands of LiPo that'll fit, so we'll see what comes of it. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted March 22, 2014 Share Posted March 22, 2014 You can get a Battery box PEQ with a working laser in it. Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 23, 2014 Supporters Share Posted March 23, 2014 Life's certainly much easier with a plastic handguard on a SOCOM, but there are a fair few options out there for handguards that'll fit a nun-chuck 7.4v in the range of 1000 to 1300mah. Ironically it's often easier with some of the newer, low profile forends because quad rails tend to have a lot of extra architecture inside which makes things awkward. Here's mine as they were: Currently all in the middle of getting re-worked. Probably about 80% done now, just waiting on a delivery to get the stock and handguard for the 12.5" and I'll need to order another front MBUS for the 14.5" since I've banished both of the King Arms VLTOR gas blocks which incorporated flip-up irons. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted March 23, 2014 Share Posted March 23, 2014 are your 'banished' gas blocks for sale? Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted March 23, 2014 Supporters Share Posted March 23, 2014 Pff.. er.. not really thought about it. Rarely get the time to write up sales threads and with a big stack of stuff already waiting to go I tend to keep AR parts which might be useful for future builds. Not a rare component or anything, WGC have the G&P versions and hk-parts + scopeandlaser have the King Arms in stock. Link to comment Share on other sites More sharing options...
Gaz259 Posted March 23, 2014 Share Posted March 23, 2014 Here are a few pics of my G&P M4 LWA Suppressor (Madbull Spikes Tactical). It has lots of internal upgrades, it sounds lovely, has great range and an insane rate of fire. I have added a Madbull ACE Socom stock, surefire scout 600 flashlight, PTS Gas pedal, Magpul angled foregrip, Magpul sling mount, Magpul mag coupler and a Trijicon X4 Acog illuminated sight What do people think ? Sorry about the poor picture quality Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted March 23, 2014 Share Posted March 23, 2014 I do like those stocks, wish I could fit one to my ERG, I have one on my G5 Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 24, 2014 Share Posted March 24, 2014 My Blackwater CQB-R. Ordered new delta ring today. Still a WIP to complete the look I want and some internal upgrades in the future. Looks so shit after seeing CKinnerley's and Cheeseright's guns! haha Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 24, 2014 Share Posted March 24, 2014 Here are a few pics of my G&P M4 LWA Suppressor (Madbull Spikes Tactical). It has lots of internal upgrades, it sounds lovely, has great range and an insane rate of fire. I have added a Madbull ACE Socom stock, surefire scout 600 flashlight, PTS Gas pedal, Magpul angled foregrip, Magpul sling mount, Magpul mag coupler and a Trijicon X4 Acog illuminated sight What do people think ? Sorry about the poor picture quality Not bad! Personally I prefer the more simplistic skeleton-style-stock design as opposed to the SOCOM one. ACOG is nice too, probably getting one for my M4 as well. Internally sounds great but I don't like 12" RIS. (Just a personal thing I don't like the look of it on any gun) Link to comment Share on other sites More sharing options...
Airsoft_Mr B Posted March 24, 2014 Share Posted March 24, 2014 Cybergun CYMA Blackwater BW15 (CQB-R M4) Mack 1 Link to comment Share on other sites More sharing options...
Djryder51 Posted March 26, 2014 Share Posted March 26, 2014 GG Top tech t4-18 Afghan and back camo paint job JackHG 1 Link to comment Share on other sites More sharing options...
Djryder51 Posted March 26, 2014 Share Posted March 26, 2014 GG Top tech t4-18 Afghan and back camo paint job Suzuki Yamamoto, Monty, Zak Da Mack and 1 other 4 Link to comment Share on other sites More sharing options...
CaptainDumbass Posted April 11, 2014 Share Posted April 11, 2014 So for my birthday I was blessed with a WE Glock 17 Gen 4 aswell as a bunch of RA Tech internals ^-^ I couldn't be happier with it for a first gbb sidearm. Although, i get very bored with the externals easily. And with no money, I spend alot of time tinkering with it in the workshop or laser engraving it! Here she is day one: And here she is today: Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Supporters Popular Post Ian_Gere Posted April 12, 2014 Supporters Popular Post Share Posted April 12, 2014 Morena Before & Afters... And a couple that show her new colours better: Ragemelon, Happy, Dan_W and 4 others 7 Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 12, 2014 Share Posted April 12, 2014 what did you use? Link to comment Share on other sites More sharing options...
Unrustle_Thine_Jimmies Posted April 12, 2014 Share Posted April 12, 2014 Holy sh*t Ian that looks amazing. Looks very authentic,looks far,far better than the awful Chinese Yellow wood. Your job on the bakelite mag is some of the best I've seen too. Can't say much more. It looks like a Real AK. Do you plan on going for a bakelite style paintjob on the pistol grip? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now