-
Posts
1794 -
Joined
-
Last visited
-
Days Won
2 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Airsoft_Mr B
-
Cm16 Upgrade barrel *HELP NEEDED*
Airsoft_Mr B replied to woodlands36's topic in Guns, Gear & Loadouts
If it's the carbine length 14.5" barrel then you want the 363mm inner barrel. 509mm is ~20" (that's M16 / AK length) so unless you have a long arse suppressor you want to stick on there, I would suggest the former. The QUALITY is the most important thing when it comes to inner barrels. Length is not really as important. 6.01s are generally avoided too because they'll require more cleaning (compared to a 6.03+) Speaking of which keeping your gun maintained will improve performance and consider using quality BBs will help too (Blasters are fine, BB Bastards -there's another brand also I can't remember- are supposed to be excellent, and 0.25 or above rather than 0.20s) You could get better than Madbull but it would be PDI / Prometheus which are much more expensive. Madbull are cheaper and widely available so I'd say it's a good upgrade choice. -
Enjoy mate haven't been to a proper outdoor skirmish in so long myself (about 2-3 years) :\ Have done indoor since then though but I don't like it as much Really hope I can get new job I've applied for which means I could buy all the airsoft stuff I want yet I have to work Sundays which will mean it's even more limited when I can even do it
-
are vsr 11s compatable with vsr 10 parts ? bolt?
Airsoft_Mr B replied to wolfairsoft's topic in Guns, Gear & Loadouts
I'm not even sure what a VSR 11 is...was gonna say Well but had a look and they're HFC apparently. I've only ever seen HFC stuff on "bb gun" websites and a few on Airsoft World so I can assume it's not a great brand, probably won't be compatible with a TM cylinder tbh. -
The 'What have you just bought' Thread
Airsoft_Mr B replied to Cameron364's topic in Guns, Gear & Loadouts
Haley Strategic Dragonfly hoodie -
Bellends. Will make sure not to buy from em
-
-
The 'What have you just bought' Thread
Airsoft_Mr B replied to Cameron364's topic in Guns, Gear & Loadouts
CKinnerley's done a video on them I'm sure. Or he would have mentioned them in his Sabre leg rig review anyway. Think I'll be getting myself a DCS in OD sometime as well, or A-TACS FG. Not sure yet. -
Warrior Assault Systems. Also four Blackhawk STRIKE mag shingles which were apparently from Afghan (damaged and dusty enough) Work brilliantly though except I don't have any other tan gear, just can't bring myself to get rid of them.
-
New to Airsoft ! got a question
Airsoft_Mr B replied to TheStrider's topic in New Players & Arrivals
You need one of these: http://airsoftzone.co.uk/pistol-silencer-adaptor-we?filter_name=adapter Then a CCW 14m threaded suppressor, preferably short (like 80-100mm) Common problem however is the slide can't come all the way back because the end of the muzzle device (for example I have a clone KX3 on mine) will hit the guide rod. I don't know if this will cause a Failure to Feed but it's not good anyway. There's two ways to fix this: 1) 1" or 2" Barrel Extension - Made by Madbull or A.P.S. (there's only a 1" version for APS as far as I know) 2) O-Rings, I bought a box off eBay with hundreds in but found two that I needed. I also ordered a Madbull 1" extension off eHobby Asia but they told me it was out of stock. Not sure whether the 2" is or not. Problem with the second option is that once the adaptor piece is on there it will start to feel tight enough but twist it that way just once and it's loose again. Not the easiest thing to explain but basically it was hard to adjust right for me and can feel slightly wobbly. Obviously doesn't help how well the they attach when the threads are covered by o-rings. Hope this helps. Also probably isn't the best idea to run your pistol with a silencer all the time as I've heard it will put a lot of strain on the nozzle and cause them to break easily. OR YOU CAN ACTUALLY BUY A WE SILENCER / BARREL EXTENSION KIT http://www.milspecsolutions.co.uk/we-pistol-silencer-and-barrel-extension-kit.html -
KWA / GHK / Tokyo Marui GBBR Centurion Arms CMR RS SureFire Scout Light (Haley Strategic Mount) PTS Rainier Arms Charging Handle (It it fits) Angry Gun 300% Recoil Kit and RA-Tech Internals SBR / CQC Upper Noveske NSR-7 BCM KeyMod Rail Panels Haley Strategic / INFORCE WML w/ HSP KeyMod Mount Sort of like this? I could, of course, list many more - but you only said one rifle.
-
What upgrades and attachments do you need? Depends if you want to upgrade the accuracy / rate of fire / range etc what parts you will want to buy. I don't think it will have Picatinny rails so in terms of attachments I guess your choice is a bit limited. I would get a scope rail like this http://www.patrolbase.co.uk/airsoft-bipod-mount/asg-aeg-mount-mp5-g3.htm#.VL1ixEesWPs so you can attach an optic. Another MP5 specific attachment would be the handguards with integrated flashlights (better than having to tape one on or something) There's one on Patrol Base for £12 but obviously since it is very cheap I don't think it will be worth spending your money on. MAG magazines are good if you want some extra ones and probably the best price because you can buy a pack of eight from eHobby Asia for £40 including shipping (or they should be about £60 delivered over here)
-
All Ares guns are fckin ugly I don't know why anybody buys them.
-
Took exactly a week for my A&K M24.
-
Amazon / eBay. They'll be the same price if not cheaper and free shipping.
-
new to airsoft from manchester
Airsoft_Mr B replied to crazyirish95's topic in New Players & Arrivals
F&O are generally alright I think. Manchester Woodland is supposed to be good which is the one I'm presuming you'll be off to. Need to go sometime myself as haven't been to a proper outdoor skirmish in years, and the other one which is close to me (Alpha One) only does a day up til like 2 or something so you only really get 3-4 hours, whereas everywhere else is more like 6. I have heard bad things about The Works in Halifax though -
WE Gen 4 Glocks are good (got a G17 myself) but £110 I think + at least £18 per mag (50 round ones idk the price) and ~£20+ for a WE NUPROL holster. People say the nozzles break a lot but I think with good maintenance and not using full auto all the time it would be okay. Have a look on here and Zero In for some second hand?
-
Warhead 9mm Conversion Kit and Magpul PTS MOE Grip
-
If you want an AR / M4, yeah definitely the G&G Combat Machine. Not exactly the most unique, but can't go wrong with them!! Would be a great choice. Wish I'd got one myself rather than the shite CYMA (cost me more than a G&G would as well....) Alternatively yeah CYMA AKs are basically the AK version of the G&G M4s I guess you could say? They're the other gun that gets recommended a lot, good value and quality. If G36s are your thing, JG ones are tough and very reliable from what I've heard (reason why lots of sites have used them as hire guns)
-
You say it's not a lot but I don't know many over £130. Most are £100 anyway. That said if you can stretch it by £10 then try and see if Airsoft Zone will get Tokyo Marui Glock 18s back in stock. http://airsoftzone.co.uk/glock-18c-full-auto-pistol-gbb-tokyo-marui?filter_name=glock%2018 If you can afford it TM no doubt are the best. Best used with Abbey Ultra which AFAIK is slightly weaker than standard Green Gas / Propane.
-
Hydrodipping can still go wrong, mind you shouldn't be difficult to get the technique right. There's also the fact it is expensive AFAIK and there's also the time consuming priming / painting a base coat stages you're supposed to do as well. Depends on your budget and what pattern you want. If it's something unique that would be kinda hard to replicate then go for it, otherwise might as well just use good old spray can. I know CKinnerley used CamoLab to do this: but unfortunately they are no longer in business
-
CYMA, BUT only for AKs / maybe MP5s? (Because they're also cheap) As you can see I learnt the hard way by buying a CYMA M4. Shite both internally and externally, and more expensive than a G&G
-
There's already a thread on this And yes TaiwanGun are good, although they charge about £15 shipping now. It's still not bad but used to be free over about £60. GunFire is another good Polish retailer.
-
Welcome mate
-
The 'What have you just bought' Thread
Airsoft_Mr B replied to Cameron364's topic in Guns, Gear & Loadouts
Thinking of getting a Madbull 4" Kit if it fits both AEG and GBBR Anybody know? Cheapest I've found is at actionhobbies - http://www.actionhobbies.co.uk/Madbull-4-inch-Daniel-Defense-Lite-Rail-Hand-guard-Black_A1EZD4.aspx#.VLQqKSusWPs -
All the tri-shot shotguns are the same, will be made by the same factory and rebranded by DE / ASG / GFC etc. They're good. Other than that, there's just the TMs which are skirmishable shotguns - but their spring tri-shots are old and rare (not worth the money) Or there are the gas M870s which are ~ £300.