Misery
-
Posts
282 -
Joined
-
Last visited
-
Days Won
3 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Status Replies posted by Misery
-
the saga of the tm sop mod is now almost over XD,outer barrel and spacer arrived now fitted just need to plug in the front wiring and put in front body pin who knew fitting diffrent front end would be a pain XD
-
Booked my first airsoft match for me and my little brother! Buzzing
-
damn, specna mk18 back in stock, but do i wait to get the TM ngrs....
-
SHS or Laylax rotary hop for an m4....
-
Looking to sell my sr25 a2 knights armament edition g2h gear box promy barrel and hop unit flat hoped and over hops .45 easy comes with 6 mags (not easy to get nowadays) and chest rig £450 ono
-
SHS or Laylax rotary hop for an m4....
-
Noob testing
out the tm glock 18c 😂-
@LocoP08i hadnt played by that point either and didnt want to shoot myself was extremely unintentional XD
-
-
Noob testing
out the tm glock 18c 😂-
i did something similar pistol had just arrived gassed up the mag to dry fire not thinking to check if it had a round in the barrel pointed at my bare foot shot meself right on the big toe
-
- strykerles, Shamal and LocoP08
-
3
-
-
im so glad i didnt pay for the original work done on my sr25 by certain shop......
so far couple weeks ago after a failure at the field found rack bent they had grinded it down in the piston and they ground part of the piston holding the rack which has allowed it to flex and bend.then tonight decided to s hop my barrel and low and behold locktite holding the c-clip in spring on top aswell,also if im not mistaken when flat hopping your suppose to remove the mound on the inside of the rubber? well they had just threw in a flat nub and called it a day!!!
-
@Druid799yup 2nd hand but low usage when purchased from sellar titan was only showing over 1000 odd rounds through it and gun was bought new pre moded from the shop yeah bud got the receipt of work deffo not a botch job from the seller bud if was any thought it could of been the seller i would of messaged or put up feedback about it rather than put up a post bud
-
-
im so glad i didnt pay for the original work done on my sr25 by certain shop......
so far couple weeks ago after a failure at the field found rack bent they had grinded it down in the piston and they ground part of the piston holding the rack which has allowed it to flex and bend.then tonight decided to s hop my barrel and low and behold locktite holding the c-clip in spring on top aswell,also if im not mistaken when flat hopping your suppose to remove the mound on the inside of the rubber? well they had just threw in a flat nub and called it a day!!!
-
@ak2m4the plastic that holds the rack in had been ground down quite a bit where the two teeth removed at the first pick up tooth wish had took a photo of the piston when i weas replacing it
And cheers for the quick turnaround on the hop unit bud had to grind a bit of my cyma's receiver for the rotary dial but other than that fitted like a charm XD
@Rogerborgi did comment on his vid asking if it was the same shop XD,they hadnt even removed the ridge bud was just standard hopped with a flat hop nub,yeah bud i agree with both yous on that one,aint protecting was never my attention to publicly name and shame tech could of had a bad day god i know how many of them ive had etc i know doesnt excuse it but was more to gauge wether i was over reacting or if was a common thing morre than anything bud.ill dm who ever wants to know what shop it is but i aint just going to publicly out em as bar hearing about one other issue all ive heard is gd things about the shop
-
-
im so glad i didnt pay for the original work done on my sr25 by certain shop......
so far couple weeks ago after a failure at the field found rack bent they had grinded it down in the piston and they ground part of the piston holding the rack which has allowed it to flex and bend.then tonight decided to s hop my barrel and low and behold locktite holding the c-clip in spring on top aswell,also if im not mistaken when flat hopping your suppose to remove the mound on the inside of the rubber? well they had just threw in a flat nub and called it a day!!!
-
Divorce came through today - glad I’m free from the the most vile cunt I’ve had the misfortune to meet. New gun to celebrate
-
gd stuff man,deffo better off man!
-
-
Divorce came through today - glad I’m free from the the most vile cunt I’ve had the misfortune to meet. New gun to celebrate
-
main thing is bud u....., get a new rif!!! but on a serious note only thing that matters is wether you and the kids are happy and by sounds of it yous are more than so
-
- Johnyboy1976 and Druid799
-
2
-
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
haha yeah i willingly lent my stepson my m4 and he well nearly snapped it in half thought hed bent the outer barrel or ripped the nut off the threads but luckily had just come loose XD
agreed as no gun sounds same
exactly bud! was .32's but like said i aint bothered bout the cost of the ammo just in my opinion and like assholes we all got em that its a dickish move to just pick someones gun up that u dont know and think its alright to use it
-
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
exactly for all they knew it could of been on its way out as it bent a piston rack last outing and would still fire so imagine iot done that again and they fired the whole mag the damage would of been more than just a rack and gaurentee they wouldnt of paid for the repair. would of been the shouldnt of left it there then
-
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
@Johnyboy1976exactly!!!,haha your wife mates wee mine then?
-
-
YEEEEEEEAAAAAAHHHHH
level up
yes i will keep doing this.....
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
shouldnt have to mention it though i dont go to a site pay for the day for someone i dont know to pick my rifle up and fire it like a wanker as the guy rattled the mag off and they dont know me from adam,and fact of matter is bud i had just repaired the rif aswell that was its first outing so they could of ended up causing damage to it if my repair joob was off,also i had comms with them so they could of asked but no,to me thats unaceptable
-
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
hmmm at a site yesterday asked to be a vip for a couple games so set aside my sr25 as only allowed to use my pistol,anyway 2 games later go grab my sr25 to find a marshall had decided to have a shot of my rif and go through the full mag not bothered bout bb's what grinds me is when i asked about it got the shouldnt have left it there then like wtf i was doing yous a favour as noone wanted to be the vip
-
Tears, tantrums, soiled nappies and sick. And that’s just from me. Interesting week so far 😂
-
7 kids and who ever says it gets easier isd a fing liar XD
-
- Shamal and GenuineGerman
-
1
-
1
-
-
OMFG!!!! I’m just watching the biopic of Bowie on Sky called “Stardust”……
then the wife asked me if David Bowie was English with guy doing a fairly bad London accent
-
looool my wifes the same bud
we are adopting a rescue dog from bosnia and were chatting away next min shes like i need to learn to speak bosnian or what ever they speak,i just gave her the look then she was like well rugers coming from bosnia he isnt going to understand english face palm moment i honestly was howling
-
-
New Perun Hybrid installed.
Anti retard design: you REALLY need to be special to mess the installation, the hardest part is peeling the selector sticker off the paper.
Programming isn't super intuitive, but not a big deal, one will eventually get used to it, plus now you have a very convenient set of stickers to attach to a buffer tube/stock for a quick reminder along with the usual card.
Disabling precocking is hilarious, the gun starts to charge like a laser beam, then fires a shot to release spring tension
Binary trigger doesn't struggle anymore to read the trigger on a "slow" build like the optical did. If you hold the trigger it cancels the 2nd shot.
Two stage trigger is super convenient, although it doesn't work when binary trigger is on (I might leave binary off for now).
Adjustable precocking/ab/trigger sensitivity are a nice feature.
Rof reduction and dmr delay are two settings I'll never touch, but I get normal people would use them.
For the price? Gate can go fuck itself.
You want the absolute maximum freedom of tuning? Can't beat a Titan with Expert firmware, but these two are very different units for very different purposes (imo).
Overall, worth the wait for me.
