FreeFrag.UK

If your company is genuinely top notch and the same applies to the product you put out along with the follow-up customer service, you don't advertise this aggressively.  As with many of the above, ads are expected since the use of the forum is free, so I get it.
 
That said, these specific ads are the visual equivalent of some drunk dickhead in a club with a 3" and no staying power that touches up random girls then calls them sluts when they slap him.  Both in the subject matter and the obtrusiveness.

While I have no issue with ad's it becomes an issue when it impacts the usability and accessibility of the forum.

While I have no issue with ad's it becomes an issue when it impacts the usability and accessibility of the forum.

I think this is finally in a state where i am happy to show it
LCT G3A4 (DMRd to 430 fps, warfet, gearbox brace)
Genuine Hensoldt 4x24 s2 (had 2 lense covers before some #%@£ng £%₩¥ decided to throw my rifle on the ground when i wasnt looking)
Original hensoldt claw mount
Aftermarket illuminator
Cheapo rail
Cyma kac grip
Ali express kac rail cover
Element llm01 (these suck!)
Blue force vickers sling kryptek limited edition 
Genuine 7.62 magpul
 
The pistol is my trusty KWA g19, these are indestructible this one was bought by my dad who used it in the garden a few times then left it in the loft for 10 + years until i took it out and it still worked!
Since then its had a tbb, ml rubber and i key added and some custom work done on the hop.
 
The shotty is my bargain double eagle springer.
 
 

I've got a WE M16a1 and very happy with it though I've only used it for plinking in the garden.
Unfortunately the mag requirements put me off using it in a game.
 
For practicality the XM177 would be better for its smaller size. (The JG XM177 being one of my fave AEGs for games)

That's the Colt Model 607, not that many were made and it saw very limited action in Vietnam, it pre-dates the XM177E1 by a year or so.
 
RetroBlackRifle is a good resource for the early AR-15 family of rifles: http://pullig.dyndns.org/retroblackrifle/ModGde/CrbGde/607.html

It's not..
Look at it. It's got an A2 upper for a start.
 
 
 
Cyma makes a decent /passable m16a1 now mukka

Just brought and collected
Ares new l85 a3 aeg blowback
 

Not exactly just bought...   but turned up from hong kong today...
 
2x WE beretta 92 Sword Cutlass Special (Revys guns from Black Lagoon)
4x spare mags




 
Edit:
Also sailed through customs without incurring charges 😃

i think that's being a little too generous to ups
 
it's more like the newspaper boy dumping the papers on a sunny day to go play with his mates.

Well this is not the development I was hoping for. I was (evidently naively) hoping that we may see some resumption of stable delivery service from those involved with shipping from Taiwan Gun (is Gunfire in the same boat?) by now but evidently this isn't the case.
 
Unfortunately I can see this getting worse once the "transition" measures that are still in place are no longer in effect.
 
Hopefully you guys can get your orders sorted, it's beyond a joke that UPS' level of professionalism is akin to a newspaper delivery boy who decides to dump their papers due to it being wet and chilly.

Well you have now.... you're welcome 😉

A trio of CZ58's from a very wet UCAP Green Ops today.

Got my MACV SOG (ish) loadout sorted.  (I know webbing isn't right but close enough for me 😉)
And a choice of weapons 😄
Yes, the XM177 look is spoiled by the A2 upper but I'd rather have the lovely recoil of the Lonex BAW than the correct details 😁

A simple change to be sure, but a welcome one. After owning this beautiful STAR L86 for approaching 7 years now I finally got around to getting the correct scope for her. Sometimes all it takes is a simple SUSAT to really complete a gun. Granted, she’s about to get a complete internal overhaul but externally she’s finished. For now...
 

 

The springer collection, few sneaky gas guns in there. Still one more shelf to build and fill with my gas and one lonely aeg.

5x PPS shells cost 16 quid from Gunfire. 2x PPS shells cost £14 here. So 20 shells cost 64 quid from Poland or 140 quid in the UK. I understand things are more expensive here. But frankly we are price gouged in this country for many things. 
 
And considering many UK airsoft shops buy from the EU for stock. Why shouldn't I? 
 
Even before we left the EU, whenever I purchased abroad I was aware I would likely not send anything back. Everything gets upgraded anyway. 

PPS PP19 Bizon, made from steel and with the over the top folding stock. 
 


 
3x800rd PPS Bizon High Caps
G&P M4 Buffer tube. 
 
SPOSN Strike Omega Combat Vest set with additional radio pouch and hard belt. 
 
SOBR Rosguardia Shoulder Patch set for my Black Moss loadout. 
 
 
 

Something I've been hunting for quite a while now:
Hudson IMI Jericho 941 GBB, silver version
Very rare gun from the early 2000's, uses the Maruzen GBB system from their P99. One of only 3 airsoftguns Hudson has ever built and the only GBB of this pistol.
Had to install wood grips on this (they're almost drop in, just have to remove a little from the heightened wood part on the inside, so that it fits the pocket of the frame), back then I only found ones with the newer "IWI" name. Recently found ones with "IMI", they're on their way now



Surprisingly tight measurements for an old japanese plastic GBB

Hate to tell you this mate but you forgot to put the front end back on before you took the picture ? 😁

Finished this today 

Cybergun are responsible for the best available FAMAS release at the moment, if memory serves there are two versions of it and it's reportedly half decent but this is based on remarks I've heard in passing.
 
Ares product the B&T APC-9 which I think Negative Airsoft made a video of work being done to one recently.
 
SRC produce the XM8, I believe one of the forum members (name escapes me, @Asomodai perhaps?) owns one or two.
 
ICS and G&G both still produce various iterations of the SG55x and GHK also produce a GBBR version of the 553. I think there are a few other companies that produce Sig SG55x's too but I can't recall which off hand.
 
A lot of it falls down to availability and which retailers are stocking what. I have a G&G Sig 553 which is an incredible gun (at least externally) but getting hold of magazines is pain in the arse and usually quite expensive.
 
While a most of the pistols you have mentioned don't have airsoft version (at least from memory) the HK45 definitely has an airsoft version (I owned the Tokyo Marui HK45) and I think there is a version of the IWI Jericho from KWA but it's NBB if memory serves. Regarding the 5-7 comment, I know someone who has ran a Tokyo Marui FN 5-7 for quite a few years now without issue although I also followed a re-build on reddit last year which has left me very tempted to pick one up for myself.

Famous last words ! 🤦‍♂️🤣🤣🤣
 
with coloured kit try washing it inside out and at a lower temp , will help the colour last longer 👍

i think i have a problem.
 
i actually start twitching now when i see an aks74u with a 7.62 mag in it......

Given the opportunity I'll be picking up the FAL from King Arms as I'd love a reason to put together a Cold War British Forces kit. It would also be good for some Cold War events once we're back at that stage.