GothicGhost

The recoil is so good  

Sounds like you need some full face protection. 

Can I recommend Laser Eye surgery... I've been a glasses wear all my life and know the pain and issues it causes for sport/activites/motorbikes etc..
 
Since I had mine done years ago, it was the best decision I ever took...life was so different afterwards.  A worthy investment.
Oh my mate got all BFG's banned at our local site..
 
He ran at a barricade with his TRMR Magflash, hoping to give the people on the other side the good news....he tripped over a log, went down...chinned himself in the face with his ARP and set off the TRMR in his hand, which at this point was next to his face.  His gloves melted through, burning his hand and he took a 2" gash out of his chin, blood everywhere.....burnt the hairs of his beard on one side of his face.. He was pretty messed up.
 
When @ Hospital getting his chin glued and hand seen too, he told the nurses he tripped on his grenade.  Plod showed up soon after!!  After questioning him..they just told him to throw the grenade next time..lol
 
HSE were then informed by the Plod (I assume) and they visited the site owner....and now all PYRO other than disposables are Banned.
 
He always gets shit for this when we are there...lol

Full auto blast to the face at 10ft if that ? Was wearing mesh mask and glasses so no facial tissue injuries BUT unfortunately for me as it was late January and colder than the mother in law’s heart the ambient temp was below zero which affected my prescription inserts and made them ever so slightly brittle I discovered later . So because this twat hosed me at such a short distance the impact of the BBs from his HPA’ed gun(thank you for proving the assumption of HPA players ?)running at a gazillion rps caused the Lense of my glasses to flex which transferred the energy from the impacts to the insert making one of them shatter and propelled all the shards of plastic in to my eye ! I was incredibly lucky not to cause any serious damage as I stopped my self from rubbing my eye as you’d automatically do . Went to local hospital , couple of hrs carefully getting all The bits out of my eye and thank f**k no permanent injures suffered . 

I learnt to wear a helmet in CQB very quickly 

Fuck!!
 
Worst i got was cqb down the tunnels. 
I really got hosed from about 30ft/10 new fangled stupid meters straight to the face.Not malicious just wrong place wrong time.My face was a mess and upon further investigation one bb had set up home deep in my bottom lip.
Couldn't moan cause it was my choice not to wear face pro.☹
Wife made me sleep in spare room so I didn't bleed on pillows! Lol
Regards  

Some custom backpacks to get all my kit to and from, as well as during larger milsim ops as a medic.
Slim son of a gun is for the medical stuff and the fatty is for everything else. Clip onto each other to make one unit when dont need just one or the other. Real neat. 

Crazy jet 106mm
Crazy jet 180mm
Low profile vortex 30mm mount
Osprey drop sling
 
Apologies for the hideous carpet, new house and haven't got to that room yet.
 
 

Because I have zero self control I gave into the pull of the Spiritus delivery at TK. Bought some bits for a plate carrier I was intending to be selling 😅.
 

My recce gat is nearing completion. 
TM MWS

I don't think there would be extra stress involved as the pressure of the gas would be constant. A longer barrel simply allows a larger volume of gas a longer time to accelerate the BB, before the rocket valve closes and the bolt cycles. Slightly more gas per shot, higher BB speed but no change in the pressure of the system.

Hello, finally my baby is finished... in about ~90%
 
External upgrades:
- FAB Defence GL-CORE S stock
- FAB Defence PTK-M front grip
- FAB Defence AGR-43 pistol grip
- HAO MK16 M-Lok 9.3" handguard
- Revanchist ambi fire selector
- FMA Specter suppressor with Acetech AR2000R module inside
 
Internal upgrades:
- EDGI Steel inner barrel 6,03mm/263mm
- Maple Leaf MR 60
- Maple Leaf omega nub
- Dynamic Precision Reinforced Aluminum Valve Blocker 
- G&P Marui MWS Aluminum Buffer V2
- G&P CNC Adjustable Power Nozzle Valve( Level 2 ) ( 4.0 )
- G&P Marui MWS Roller Bolt 
- Dynamic Precision Enhanced Sealing Buffer
 
Future upgrades:
- Ambi mag release
- Ambi charging handle
- Magpul BAD lever
- Magpul or SI Cobra trigger guard
- two stage trigger
 
And I have a question to G&P Nozzle Valve ( 4.0 ) users. What fps/joules you have on max settings? At least I think is max settings... A screw should be all inside the nozzle right? Because I have only ~310fps/1,24J on 0,28g it's just a little above 350fps(0,2g) using Nuprol 2.0 green gas. I was hoping that at least ~450fps/1,8J(0,2g) would be drawn 😕. Maybe I messed up sth during re-assembling?

Picked up a couple of ACE1 ARMS PMAG's for my MWS. They seem good and the weight is 399g compared to the 453g for my Marui magazines. Tempted to swap out the 6 marui mags for another 6 of the ACE1 ARMS magazines.
 

Hey @GothicGhost 99% of all after market free float rails / handguards will work on the MWS. Just get the shim from PTS and you are ready to go. 
 
The problem usually lies with those handguards relying on fixture both at the barrel nut and front sight post. 
 
good luck! 

Yeah I bought the nuprol one....😅

Here’s my MTR, all finished for now  mainly cosmetic stuff done to it, with just a modify tan bucking and sixG nub internally. 
 
Replaced broken MTR stock with a MFT Battlelink, fitted Magpul K2 grip, PTS Radian Raptor charging handle, BCM stubby grip and MLOK rail grips up front.  UTG scope mount with vision king VPO on top. 

I appear to have bought another mws...

I don't know if it's because I have brand new magazines but loading them with the m4 style speed loader feels impossible
The tube loader that comes with the gun is really good but I can't carry that around with me in field lol.

Can some one confirm for me what type of barrel nut fits the upper? (I know you need an adaptor ring, ive got one on mine right now)

I see some MWS's with AEG on them. So im slightly bamboozled. Or will the MWS fit AEG and GBB barrel nuts?

Trying to hunt down a new rail for my PDW idea. 

Said Idea: MC6 PDW. I fancy doing some thing similar. I have the G&P stock, just trying to find a nice M lok rail.

Finally got the black sling mount and it's finished.
Nice compact for traveling
 

My MWS.

I have finally joined the club when I picked up my MWS yesterday!!!
 
I went for the CQBR version and I am blown away by it!! I gassed up a magazine when I got home and wow. Absolutely love it!!
 
i picked up some more magazines and I received 2 super nubs from Six Gunsmith (Thanks for the 1 day turnaround Dave!). Just waiting for the Modify Tan buckings to turn up. I have yet to do the green gas mod but my other half is out tonight getting her lips done (!!) so will tackle it then.
 
just wanted to thank everyone for the amazing information and help and I am pleased to be a member of Club MWS 😁
 
 

The recoil is so good  

Good choice....! Ahhhh the FS buy one get two mags deal thing
 
How long before you stick a Mk18 rail on it? If you do, you'll need a PTS barrel adapter and a few shims.....
 

 

She is complete.....for now.