Jacob Wright

Try outdoor and Tactical. They don't do the super heavyweight ammo in bio, but you can get Geoffs naturals up to at least 0.45g.
 
https://www.outdoorandtactical.co.uk/product-category/consumables/bbs/bio

Bad photos in any kind of sale make me scroll past regardless.

All done with new scope on . 

Start of a new project - FBI HRT themed M4:
KSC RM4 (rare in the UK, has HK serial no.) Replica Guisselle MK4 Rail in OD Replica ScalarWorks BUIS Pistol Grip / Stock sprayed OD To do:
Engrave trades on the receiver set Cerakote receiver set Gate MERF 3.2 to be installed

I think this is finally in a state where i am happy to show it
LCT G3A4 (DMRd to 430 fps, warfet, gearbox brace)
Genuine Hensoldt 4x24 s2 (had 2 lense covers before some #%@£ng £%₩¥ decided to throw my rifle on the ground when i wasnt looking)
Original hensoldt claw mount
Aftermarket illuminator
Cheapo rail
Cyma kac grip
Ali express kac rail cover
Element llm01 (these suck!)
Blue force vickers sling kryptek limited edition 
Genuine 7.62 magpul
 
The pistol is my trusty KWA g19, these are indestructible this one was bought by my dad who used it in the garden a few times then left it in the loft for 10 + years until i took it out and it still worked!
Since then its had a tbb, ml rubber and i key added and some custom work done on the hop.
 
The shotty is my bargain double eagle springer.
 
 

Cyma CM041 HighSpeed finally finished (are they really ever finished?!)
 
Short stroked 3teeth, new air nozzle, ML rubber and nub. Gate MERF mosfet in the stock along with a HUGE 7.4v nunchuck battery...and space left over!)
Genuine MAGPUL fore end with TM grip and Olight Valkyrie torch. Vortex Crossfire red dot and a tritium vial on the front sight post for dark CQB / back up sights.
Obligatory Spitfire tracer unit with Airtac blastwarden outer cover and Ferro Concepts single point slingster (as H&K hate left handed people!)

Just started to dive into my CA MP5K project that I got from the forums. 
 
Gone is the hideous rail someone had put on it, now working on re-routing wires, ordered some new body pins and trying to get rid of the thread adaptor by means of Dremel/WD40/Fire
 
What I can confirm is that it fires, is accurate at CQB ranges and is very loud...

No one's ever asked that one before 😏
 
Get yourself something from TM, all are good, my faves prob the hi-capa 4.3, but anything by TM will do the job superbly.

Had a few hours to get some dremel-ing done this afternoon. Trying to split my time between repairing the Land Rover and working on the various Airsoft projects I have going on. 
 
It’s not pretty and needs some tidying up but I’m happy with the progress!
 
 

Building a lightweight belt loadout out of what’s in my gear cupboard in anticipation of being able to get out and snipe some people..
 
Pretty much all Blackhawk pouches, I discovered the Well magazines fit perfectly in a double 40mm pouch. 
 
If it doesn’t work I’ll probably just throw all the bits I need into a claymore bag and roll with that instead!
 
 

Just started to dive into my CA MP5K project that I got from the forums. 
 
Gone is the hideous rail someone had put on it, now working on re-routing wires, ordered some new body pins and trying to get rid of the thread adaptor by means of Dremel/WD40/Fire
 
What I can confirm is that it fires, is accurate at CQB ranges and is very loud...

Done!

Finally got around to chopping the barrel and fitting the new flash hider. 
 
Definitely a lot more usable in close quarters now!

I’m pretty sure that’s who I bought it off!
 
But yes now I look back at the Strike Back stuff you are right!

Finally got around to chopping the barrel and fitting the new flash hider. 
 
Definitely a lot more usable in close quarters now!

Finally got around to chopping the barrel and fitting the new flash hider. 
 
Definitely a lot more usable in close quarters now!

Picked up this G3 a while ago. Just waiting for a flash hider from LCS to arrive, I’ll chop the inner barrel that extends into the suppressor down so it’s more close quarters friendly. 
 
Also got a railed handguard but not sure I want to ruin the classic lines of it, although it would be nice to mount a torch? 
 
What do people think?

Picked up this G3 a while ago. Just waiting for a flash hider from LCS to arrive, I’ll chop the inner barrel that extends into the suppressor down so it’s more close quarters friendly. 
 
Also got a railed handguard but not sure I want to ruin the classic lines of it, although it would be nice to mount a torch? 
 
What do people think?

i
i got the gun second hand but i would say its one of these.
https://www.patrolbase.co.uk/kublai-dummy-mini-cqc-silencer-set

Thats noice. Please take that top heat shield off tho 😢 

Thinking about painting the Minimi in the same colour scheme as the rifle, what do we think?
 
I really want to paint the torch on the M4 as well to give it a more matte finish. 

Was moving some bits around tidying and decided to take advantage of being able to get an up to date collection picture. 
 
- ASG M4
- Cyma AK74
- ICS MP5 (Soon off to a new home)
- TM Glock 19
- TM P226 E2
 
Not included are my 2 A&K Minimis, or my G3 that should arrive next week. 
 
What to buy next? 🤔

Was moving some bits around tidying and decided to take advantage of being able to get an up to date collection picture. 
 
- ASG M4
- Cyma AK74
- ICS MP5 (Soon off to a new home)
- TM Glock 19
- TM P226 E2
 
Not included are my 2 A&K Minimis, or my G3 that should arrive next week. 
 
What to buy next? 🤔

Not quite as exciting or intricate as a lot of the guns on here but its my first RIF and given its just a Cyma im really happy with it (sorry photography is not my strong point):
 
Cyma CM002
PTS ergonomic grip
Magpul front grip
XTM rail covers
Magpul STR stock
Vortex strikefire 2
Cheapy rail QD sling point
Nato 3 point sling
Nuprol N mag
 
The only internal upgrades are:
Deans connectors
Maple leaf macron bucking
Maple leaf omega nub