Jump to content

ghostwalker

Members
 View Profile  See their activity

  • Posts

    454

  • Joined

  • Last visited

  • Days Won

    3

  • Feedback

    0%

 Content Type 

Everything posted by ghostwalker

  1. ghostwalker

    sad times. Not played in a couple of months as my usual lift has gone awol and now i have buggered my right knee up. Just want to shoot some mofo's lol

  2. ghostwalker
    started poorly. Filled my water bladder and found it was leaking. Grabbed my clone ms3 sling to fit to my mtw and realised the main clip had snapped. Changed everything over to run my g3 as a dmr and swapped water bladders and headed off. Games were fairly dominant to the point of silly. Even with a team shake up after game 2 as there really was that much disparity in teams (attack/defend game with a good 15 minutes difference in times). Some good long range shots a few grrrrs and a bit of bad language after getting a double tap to the temple from probably 10 foot away. No excuses, i was in the open and upright so go figure. But not a bad day for a site i have fairly mediocre expectations from usually. Now to find a decent quality sling that i can trust as its mostly for use on my mtw forged rif with vortex sights. So a few extra quid is going to be worth paying
  3. ghostwalker
    Made the hour and a bit trip down to gunman airsoft for a change of scene as the local site staff had all upped and buggered off to ibiza. It was only my second visit in a year to gunman and as usual it was a well run day and they made sure to take breaks, encourage people to drink and provide water if necessary. From my own point of view it was a great day. we played the woodland side in the morning and switched to the buildings/open area side for the afternoon. games flowed well and for a change i was on a team not getting rolled into oblivion. We had a guy named Nel (firefighter) who was trying to organise and encourage some great team play and that makes a huge difference, especially on a regular skirmish day. Add in finally my wolverine mtw decided to perform as i hoped it would and the combination off ess crossbows, valhalla gasket and ex fog unit provided a rare fog free day (may they continue). So a happy airsoft sunday for a change.
  4. ghostwalker
    It's the one cirled in this pic
  5. ghostwalker
    Bit of a odd one. I have noticed that the pressure gauge on my hpa tank appears to be faulty. Its stuck at 3000psi and the needle never moves either direction. An example would have been after today where I put well over a 1000 rounds through my mtw. It started at 3000pai and finished just the same so I either have the world's most efficient gun or its knackered. So can/is it worth replacing. If so how the heck do you release any remaining pressure from the tank and what would I need to make the repair.
  6. ghostwalker

    why is it always a bank holiday weekend that you discover you need a part for a rif (in this case g&g green bucking for my mtw). Order placed in the hope it arrives in time for next weekend.

    1. strykerles

      strykerles

      I've got one if you get stuck, came out my rk74. I prefer maple leafs

       

      can send 1st class if required 👍

    2. ghostwalker

      ghostwalker

      Cheers @strykerles I have one on order from bullseye country sports. They are usually pretty speedy with getting stuff out. Just the frustration that i only noticed the tear yesterday.

  7. ghostwalker
    Aap shinobi, 2 mags, flamingo bucking, hadron loki hop unit and a holster for the aap. A few days ago I ordered a exfog unit and valhalla kit for my ess glasses
  8. ghostwalker

    What's people's genuine thoughts on the aap pistols? Thinking of one as a side arm to my dmr 

    1. Show previous comments  3 more
    2. AdrKraft

      AdrKraft

      I'd say more people complain about its looks rather than how it shoots, probably one of the best price effective pistols, honestly a pleasure to shoot with

    3. ghostwalker

      ghostwalker

      @Terrywristt @EDcase @Impulse @AdrKraft cheers folks. I have jumped in and ordered the aap01c shinobi, a couple of mags along with a flamingo 50 bucking and the hadron Loki hop unit.

       

    4. Sewdhull

      Sewdhull

      They shoot really well and will last if you stay in semi

  9. ghostwalker
    Ex issue dpm ops vest, dpm soldier 95 shirt, trousers and boonie. Some itw nexus clips to attack a rocket pouch to the vest. Some velcro to allow patches onto the soldier 95 shirt. Helicon green tshirt. And for my other kit, a quad smg pouch. Finally a o ring rebuild kit for the mk23 mags.
  10. ghostwalker

    Side arm options for a sniper/dmr player. I am done with the mk23 as the mags just keep dying on me even when i have done all the sealant etc etc.

    1. Show previous comments  6 more
    2. Rogerborg

      Rogerborg

      You can carry a lot of plastic for the same weight as a few gas mags.

       

      evolution-of-airsoft.thumb.png.71c6b6efb2c4df066d9b616533856566.png

    3. ghostwalker

      ghostwalker

      sadly @Rogerborg my mp5sd6 is far too heavy for that jobby lol. I did try but the tm one weighs more than my mtw does lol

    4. Krisz

      Krisz

      AAP-01? It's cheap and eats glock magazines.

  11. ghostwalker
    Best I can do. Mtw Silent industries order There's a vertical grip on the way from amazon and a hex supressor too.
  12. ghostwalker
    I have one of the blackhawk enhanced packs on my us alice webbing kit. Was to keep the 'tears of the sun' vibe going. But it's a pain in the butt! just a smidge to small for a hpa bottle but a mile too big for a bag of bbn's, gas refill canister and small tool kit. It also has more straps than a swingers swing
  13. ghostwalker
    vert grip as apparently i dont own one in black plus the silent industries alhpa hop unit, dial, feed tube support, inferno nozzle, g & g green bucking and a omega nub. Figured if i was ordering one of the parts from silent industries i might aswell order the lot.
  14. ghostwalker
    Quick? Only been pondering it for a year and finally ruled out going the mws route.
  15. ghostwalker
    Wolverine mtw forged tactical with 4 extra mags. Been promising myself I would get one and finally have. I think the bank manager just cried into his caviar.
  16. ghostwalker

    torn right now. Plan on getting a wolverine mtw or get a tm mws and run it with a hpa adapter.

     

    1. Krisz

      Krisz

      Tough choice because both are good on their own.

       

      MTW Unleashed got released not long ago so no need for a line anymore. :) 

    2. ghostwalker

      ghostwalker

      I already have the bottle and line as I have a inferno engine in my g3 dmr. 

      I love recoil rifs. But just don't know if running a gbbr via an hpa adapter is going to cause more issues than its worth. 

    3. Krisz

      Krisz

      With a decent hpa adapter you shouldn't have leak or misfeed issues. 

  17. ghostwalker
    Ummmm don't know about typical but 400 bbs in 2 mags for my g3 with inferno engine. Cant say i have ever actually gone through a full magazine though. But mostly its down to the mag that came with the rif and the only other one i could pick up at the time.
  18. ghostwalker
    well i have safely rewired the tamiya connector to deans and so far not blown the gun, the battery or myself up. All good so far. Its a shamme the tm200rd mags dont activate the cut off though.
  19. ghostwalker
    Whats best though. resolder battery conectors ro mr30 or cut off the mini tamiya from the gun adapter and solder a deans onto it. If so...Any idea which side is positive and which is negative as both wires are black!
  20. ghostwalker
    Woohoo it's arrived from airsoft competitions today. But what on God's green earth is that battery connector all about. There's me sat with a bunch ofn7.4v lipos all wired to deans and going.....huh
  21. ghostwalker
    cheers guys. Ordered 1 of the 200rd high caps just for now. Will have to order some of the midcaps when im not so poor lol.
  22. ghostwalker
    have heard this. Wont know how hefty until the nice man from parcel force delivers it tomorrow. When you say no mags other than the tm ones are you meaning that work with the cut off. Or full stop. As i can handle the loss of cutoff (he says knowing every mag for his kwa rm4 is a pts one to trigger the cut off)
  23. ghostwalker
    Ok so as you may have seen. Courtesy of Airsoft Competitions i am the proud owner of a brand new tm mp5 sd6 ngrs. The sadist in me is hoping to run it like a back up/side army to my tm g3 that has been hpa'd and i use primarily as a dmr. I have ordered a knock off of the sas style concealed holster in the hope it will help keep the mp5 out of the way a bit more (will need to rework my entire woodland webbing kit. I think the thigh holster will be too low for use with the sd6 and currently the kydex one is a bit too pricey at £170. However my main question is regarding mag compatibilty. Aside from the tm ngrs mags that activate the cut off. What other mags are compatible as i was looking at the ares 95round mid caps or maybe the battleaxe aut winding mag. I know they will take away the empty cut off feature. But has anyone used them in the ngrs mp5's
  24. ghostwalker

    Boom. Buzzing. Just won a TM mp5 sd6. 

    Nkw to go kn the hunt for some spare mags for it.

    1. Show previous comments  1 more
    2. ghostwalker

      ghostwalker

      @Jacketcheers, thats one thing. Now a way to carry the darn thing as a 'side arm' rather than a primary.

       

    3. gavinkempsell

      gavinkempsell

      Would an MP7 leg holster work or could be adapted?

       

      65525_1165af89-f824-47fa-b161-b5798851f75e0.jpg

    4. ghostwalker

      ghostwalker

      @gavinkempsell im trying a knock off of the sas concealed holster that  goes on your side. Failing that i might try a thigh holster but fear the mp5 sd6 might be too long. I have been shown a kydex one but thats big bucks retailing around £170

  25. ghostwalker
    Got this far with my g3 as u got fed up with it being 4 shades of grey and black. Can't decide whether tinleave it at this or do something more to it. It will have the vortex optics reattached and wrapped in some woodland scrim netting as I just couldn't bring myself to spray the sights.
×
×
  • Create New...