Leaderboard

*quick sale* and *collection only* are typically two time waster flags for me. I don’t even bother messaging them.

Not directly bought, but £10 worth of raffle tickets secured this. The plan is to throw them all at the Lad next time we play together.

As a starter for 10 points, all made up from gear i already had. 1. Crafted Novvi cape in everglade. 2. Cheap micro chest rig in ATACS-FG 3. Walther P99 with suppressor 4. KJW Ruger Mk1 cabine with a 2-7x32 EDIT: the suppressor on the MK1 is made from a pool cue extension handle, 3D printed baffles, foam inserts and an aluminium over tube. The actual suppression is only about half of the tube. Currently set up for 5 KJW mags (4+1) and the same for the P99. Primary can be swapped out for M4 based mags for AEG DMR if required. Ruger is currently doing circa 475fps so a good starting point in terms of power. Garden isn't long enough to dial in hop for max range test, so that'll have to wait. Also got an option for carrying Ares Stryker mags so I can steal my sons boltie if required. I had a WE M14 with 7 mags on a belt kit. Weighed a frigging tonne but when I'd fine tuned it, it sent Madbull .36 for miles. Apart from the weight, cost and inconvenience of 20 round mags in such a beast, I loved it.

Lambda MK48. Weathered best I could back to the grey underneath, as per the real thing. Not sure I'm a fan of the suppressor.... But hey ho.

I'm the opposite to you two; I would've bought this specifically to have a takedown version, but that's just me as a bit of a collector. For actual usage, the regular m700s are good and the takedown models tend to have loads of issues, so you both have the right ideas there. I have... essentially 5 m700s at this point, and not one of them is a takedown version 🤣

It's probably happened on a forum at some point with someone else. I'm speaking from my own experience with a friend getting into airsoft and after getting his UKARA defence signed off. The TLDR of it is that he asked for advice on where to get a specific RIF for around £300. I gave advice but he insisted he knew better and ignored it only for it to bite him square in the arse. I gave a few options, suggesting one that was local albeit 10% more expensive but if something was wrong, he had the luxury of being able to travel less than an hour and return it in person and not be fobbed off on the phone/over email or worry about posting it and and being damaged in transit. He went for the cheaper option, which was much further away but he rather smugly proclaimed himself to be a "shrewd shopper" and accused me of bias, favouring the local option as I had bought from that retailer it in the past. Out of the box, he said it didn't shoot straight as his shots went left of the target past 20m or so, so I suggested he first clean the inner barrel. Nope, he knew better and would push ahead. I suggested he may have to re-seat his hop but warned it may invalidate his warranty. He insisted on going on and if he had any more trouble, he'd return it and explain the fault. We went on and played a skirmish where he said his gun jammed every so often then Sod's law happened as he dropped his gun on concrete and caused significant cosmetic damage. He thought to return it and I said there was a cat's chance in Hell that the retailer would accept it that condition with the magwell being cracked and the handguard having a dent and could deem the fall to have caused the fault he reported. He went on to check the return policy and not only was I right about accidental damage invalidating a return for a fault, he had left it too late after purchase anyway. I haven't been a total and utter bastard yet as I haven't said "I told you so" or that he wasn't as shrewd a shopper as he thought because he didn't consider the post-sale experience too. 😅

Wow, you've given this a lot of thought. My suggestion for a fun little impression would be to wear a kilt (with a placard as a sporran) with DPM top. There's a player/marshall at POW that often wears a kilt & TBH the bugger suits it, and if it's good enough for the trenches in WW1 it's good enough for a gameday.

As a fellow M14 enthusiast, there are many ways to skin that particular cat: cheek risers, low profile sight mounts etc.

Just being out in the Rain isn't going to damage your AEGs, just keep the barrel pointed downwards so no rain gets inside, and make sure to dry it off at the end of the day.

Picked up the M700 box of parts that was selling on here recently. Should be a fun project getting it up and running!

Probably for the best, my gun room/man cave is the equivelant of my Grandad's workshop/shed.

https://shootandscoot.co.uk/products/wwii-usmc-ka-bar-fighting-knife

You want to cook them dinner?

Mines jammed with all my tents, camping and hiking gear too. Why have one tent when you can have 4 or 5. It's like go outdoors in there. The wife refuses to enter or clean it. 😆

My first MWS, lovely bit of kit. Its a TM CQBR Block1

Abs stunning, thanks man @Austeyr😂

As a previous comment has advised.. **collection only** and seeing it being re-listed, re-listed, re-listed. Sending a message to advise interest in item and explaining I can see it having been re-listed many times annd happy to cover all postage costs. Then being ignored. And then seeing it re-listed again, and again and again…

https://youtu.be/xgV8ZByAF4s?si=RqkBJxwnSlKP0NZb Oh YouTube doesn't auto embed. rip

I can confirm, you are not! The wife objects to me referring to it as such when we have guests staying though!

I don't sell many rifs as I like to keep my toys but it's certainly been recommended in these forums that sellers simply check the buyers site history (comments, pics posted, feedback) for peace of mind.

Haha, I've heard a lot about these both good and bad, but I do love a teching challenge. I may see if I can build it as a non-Takedown version but well see. I'm still stripping it down to clean and grease it. So much gunk, metal shavings, and dirt, but hey that's what I expected tbf. Bargain price if I get it running well. A few steel aftermarket parts in there as well, including most of the bolt.

Brilliant, thanks guys. I shall follow your advice. I always keep them all inside when not in use and I can put a portable dehumidifier in the room overnight to remove any excess moisture. I can't be the only one with a spare bedroom named "the gun room".. 😄

Short of submerging it in water you’ll be fine. You’ll have given up with the weather long before your gun does. As said, just make sure you dry it thoroughly when you get home.

Thank you for grabbing that. I didn't need another project and that one was calling my name

Got it before I could. Was going to get it purely so I could have a takedown version in my collection, but I've heard they can have issues when it comes to performance. Keep us posted how it goes!

Hey Loki, I think there's a few of us on here experiencing similar issues, well done for not letting it get the better of you. I get your reasons for mag compatability etc, between rifle & pistol, but cant help but think that the benefits of the lighter carbine will be offset by the weight of the numerous gas mags you'll need to carry, especially if you want any kind of reasonable ammo capacity ?. Obviously a dmr role puts you midway between assaulter & sniper, bit more limited on fps, & probable range, than a fully set up sniper. Why not consider something like an m14 socom, light & not the full length rifle, but excellent range, especially if you can get it to the dmr limits (& ive heard good things about players insulating inside the body for further sound reduction), aeg so good all year round, & technically you'd probably get away with just one mag if you run a hi-cap, meaning you can slim down your load carrying kit to the bare essentials, & a well set up nbb mk23 or Nov equivalent & 2 or 3 mags should cover your sneaky sidearm needs. Obviously im not trying to teach you to suck eggs lol, you've been at it at least 5-6 years longer than me, but being equally broken means ive had to drastically rethink what i use. Worth considering ?

Whilst I understand how dodgy the question sounds, I promise I'm not an up and coming road man spouting to anybody who will listen to give me their phone or I'll checks notes "chef mans up"??? I'm sure we've all seen the rubber knives that look like this: However I'm wondering if there's any better versions that are more "authentic" that are still airsoft safe? Something like the above. I have seen the "Cold Steel" ones but I'm not sure if they're airsoft safe as to my knowledge they have rods through the blade? It's more just for show than anything, however whilst my local is fine with me having real bayonets on gear (As long as it's cable tied so it can't be pulled out to "chef mans" who don't call hits!) I wouldn't mind the thought of going through a kill house with a rubber knife stuck on a 20" m16 🤔

It's so he can point to it as proof to the Mrs that has selling it all up but just...no one is biting.

Irrespective of whether members have been happy with their deals with him, many, me included, have questioned the validity of his ads. Such as claims the goods are new, but no warranty is given, & according to the forum rules, retailers/dealers aren't allowed, & all items are to be considered secondhand. As for his prices,they've often been shown to be equal to, or even higher than rrp, even though he'll try to claim otherwise.

According to google, in native road man it means "If someone wants to chef someone up it means to stab them" but sadly it is a language lost on me 🤷‍♂️😂

Sadly they're not rubber, but TS Blades do some nice prop/training knives. I had one but lost it mid game...and it was a green handle so no luck finding it

I have been involved in airsoft for a little over 30 years, between that and my day job, my body is old and broken and I have expanded in girth. But I have no intention of stopping, merely adjusting. I am of the opinion now that I need to be slower and further from the action, so sniping is on the cards (maybe DMR in a ghillie) I am looking at the Novvi SSX303 (a Mk23 carbine) as a primary and maybe a Mk23 as a secondary for mag.compatability. My issue is previous Novvi experiences have been bad. The SSQ22 (KC02 copy) was awful and I don't fancy the disappointment again. Does anybody have firsthand experience with the SSX303? Will it work as a DMR / sniper platform? Are there comparable alternatives i should be considering for a stealthy option?

That's the plan! But my god is it expensive... and I need to buy a car first, which is also expensive. But I will get one. Eventually. I want a GBBR m21 for regular use and 'Namsoft!

Lots of new stock available this week - A summary of a few items below for those who are not in the know! KRYTAC KRISS® Vector GBB Airsoft SMG Dual Tone - Black/Dark Earth https://www.airsoftworld.net/krytac-krissr-vector-gbb-airsoft-smg-dual-tone-black-dark-earth.html KRYTAC KRISS® Vector GBB Airsoft SMG - Black https://www.airsoftworld.net/krytac-krissr-vector-gbb-airsoft-smg-black.html Double Eagle Daniel Defense MK18 MWS GBB Airsoft Rifle - Black https://www.airsoftworld.net/double-eagle-daniel-defense-mk18-mws-gbb-airsoft-rifle-black.html Double Eagle AEROKNOX AX // 15 M4 MWS GBB Airsoft Rifle - Black https://www.airsoftworld.net/double-eagle-aeroknox-ax-15-m4-mws-gbb-airsoft-rifle-black.html Lambda Defence B&T Licensed GHM9 'Gen 2' GBBR SMG - Tan https://www.airsoftworld.net/lambda-defence-b-t-licensed-ghm9-gen-2-gbbr-smg-tan.html

App is working for me. A plethora of airsoft items available and able to be shipped to me. strange!

You can take a horse to water but can't make it drink it... LOL

It does seem a little Mack’s in my opinion. I agree he’s got a good rep on here. But it’s only a matter of time before we all end up on here 🤣 They were £500 new. Only came in black. He’s rattle canned it (which in my view devalues it). If he did a good job of stripping the paint off, or if he’d left it black, there’d be an argument that £500+ was fair, as it’s 1 of 1000 with a unique serial number.

custom gbb workshop wauser m712 chinese copy mauser schnellfeuer 1938 we gbb deep marking remove original paint detail fix

I've fortunately only seen it... twice over the almost 20 years I've been playing. Both times it's been over something incredibly stupid and trivial, and fortunately I've never actually had anyone throw a punch at me; being 6'5" definitely helps there, as the guy who squared up to me in that Vietnam game a few years ago did think better of it and walked away eventually. And you're totally right. Fisticuffs over BB wars is turbo-cringe.

There are many topics discussing UKARA registration but to avoid this getting lost it one of those topics I'll add this here... I just thought this was a well made video explaining airsoft 'rules'.

There's a gap in my increasingly nonsensical, borderline-indicative-of-a-personality-disorder list of YouTube subscriptions for a channel with a focus on pot-bashing within waste water run-off systems so crack on chum and get that content out.

Will you explain how to acquire the UKARA licence, or is it just going to be pot-bashing?

Might do my own version of this except it’s just a 10 minute video of me in a storm drain bashing pots together and viscerally screaming “It’s not a license, stop saying it’s a license” Over and over again.

Saw this cracker through a Facebook advert 🤡

He cant follow the rules, so ive taken it down😏

I mean Pornhub does keep listing her as an 'amateur' despite the fact that she's had more pricks than a second hand dartboard..... or the ahem "combined mileage" being more than some of the space shuttles have covered. On a related note..... £40 postage, that shit wants to be coming next day delivery in a silk lined ebony case for that kinda cost.

If that's "practically brand new", Bonnie Blue must be a virgin.

"Fully upgraded" but nowhere in the description does it state what is upgraded. If you can't be bothered to list what's been done to it, why should I bother to message you to find out? ?