Leaderboard

As a lot of threads end up with one of us recommending the Tokyo Marui MWS, and i get PM's asking about it, i figured I'd start a thread to keep all of the information in one place. Here i plan on covering a general overview of the gun, as well as upgrade parts, general maintenance and tuning. If anyone else wants to share any information, guides or even gameplay with their MWS, here is the place to do it. With that being said, lets get on with it. I've had my 2 Tm m4 GBBR's for a little over a year now, and they've got through dozens of changes to get them where they are today. Out of the box they are beautifully finished and boast impressive performance. I bought my first one from Zeroone, who price matched it for me. At the time the gun set me back £430 and the magazines £35, but they have risen quite a bit in price in most places. The gun is incredibly well finished and sports a Cerakoted receiver. Before opening the box, i didn't get what the big deal was about Cerakote, but that all changed after using it over time. The finish is VERY resistant to the hard life I've shown it, and is far more scratch resistant than any paint or anodization on any other gun I've owned. The two I have still don't have a scratch on them. At the rear is a standard m4 stock, which does its job with little wobble, but isn't the nicest one I've ever seen. The railed handguard is very solid and nicely finished with all of the correct numbered markings on the rails. From there you have your usual front triangle iron sight which DOES NOT have a sling attachment at the base. The magazines hold 35 BB's and have a Cerakoted shell to keep them from scratching easily. They have very recently started coming with silent fill valves, but are mostly the normal kind that hiss when filling and spray liquid propane when full. Its worth noting that the valve sits at an angle to the baseplate. One modification i would highly recommend to do is the "green gas mod" which involves removing a long zinc tube from inside the magazine. This allows more gas into the magazine and upping your shots per gas fill dramatically, with some people reporting 150+ shots from a single gas charge. As a side note, i have started to just cut the zinc tube about 1 inch from the base instead of removing it entirely. A video showing how to do it: Chronograph Results: using blaster .20 BB's and green gas i got around 298 fps with a deviation of 2FPS. yes, you heard that right, " FPS. This thing is incredibly consistent! Important information: The inner barrel is 250mm on the 10.5 " CQBR and the 14.5" carbine, meaning on the 14.5" outer you can fit a much longer 370mm inner barrel. The Hop up adjustment dial is similar to Tm pistols and can be located inside the upper receiver by locking the bolt back and looking down the magwell. Due to the way the outer barrel is cut, it's not possible to fit an aftermarket rail onto the gun without one of two things. A barrel adapter ring (PTS, ORGA and a couple of others make them and usually cost £10) or A dytac outer barrel, which has a wider lip, as shown below. Dytac on the left First shots: I took it down to the 20m range at the First and only shop and loaded it up with .28 blaster devils. They had multiple targets there, but i focused on the little spinning targets at the back wall. The orange discs must have been no more than 1.5 inches in diameter and i was hitting it virtually every time with the iron sights. So far, very impressed with the accuracy. So much so, I treated it to a new dress! First internal upgrades: After speaking with Dave about the gun, he explained that the gun wouldnt hop really heavy weight BB's with the standard nub. because it was hollow and squished when applying hop pressure. To remedy this he machined me a great little nub out of brass. Isn't it beautiful!? This meant i could now lift much heavier BB's increasing my range and accuracy even further than the already impressive stock performance. Using this new nub and GEOFF .32 bb''s i was able to get the bb's out 60+M with a flat trajectory. They were making a 1.5-2ft grouping on the plastic bales as seen in the video below. I have SOOO much move to cover, including barrel reviews, customs mods and a DMR build, but its 5;30 am and i need to be up in an hour, so we'll continue this tomorrow

Me right now...

Better pics to follow, but Cybergun version of the S&T M249 para

Well it's arrived ......... but they sent it to my home address so it ended up with a neighbour . Not actually a problem but not as requested. On the plus side they have sent me the Cybergun version , same gun but with trades.

Just chamber some 762 they will call their hits then. Ceramic and metal bbs banned at all my sites and all sites I've read the rules on.

Found out why my MWS did (has since been resurrected!). Getting .36s and .43s mixed up will do that to a rif... I accidentally chucked 1000 .43s through it. Damned bottles all look the same! 😂

Well I've had an email with a shipping number so should have it tomorrow fingers crossed ........note to self take battery and BBs to work tomorrow ! I've had to chase them all the way though, so wouldn't use them again.

Thanks to rocket aka John and his images myself and someone skilled in fabrication, converted the armorer works drum mag. Tested this weekend in game rather than proper testing the gas amount came close to the amount of bbs and it left a great smile against hpas and aegs alike. So many are interested in the MWS when they hear it and well they should be. Still semi auto is the only way to use this for perfection Now just to tidy up the drum and paint

Oh but that's just because you're limiting yourself to plastic. Have a look at ceramic 👍 Muchos pennies but heavier and whiter than grey 0.5s (and quite possibly not allowed to use them on any UK sites lol)