Supporters Ian_Gere Posted September 2, 2013 Supporters Share Posted September 2, 2013 Actually both my filters have metal casings I was thinking of posting the template/s to you analogue stylee, so you can stick it/them to the polycarbonate and cut around it...? Link to comment Share on other sites More sharing options...
Blueangelical Posted September 2, 2013 Share Posted September 2, 2013 Mmmmmm, DREMEL with cutter disc attachment perhaps.., go carefully around the circumference till it pops right off...? I'll have a look at one for you if you wanted to send me one to see what I could do.. Yeah, should be able to do that, give it a try. S10 fits nicely under my helmet, has its microphone attached to it on the opposite to filter side. You could always fit a small PC fan in the filter with a couple of AA batteries, like the ones you can buy. I have one of them, but after spending a day skirmishing in it, find the hard plastic mask not as comfortable as the S10 rubber, even with the fan in the filter. May sell that one as its just sitting on the shelf actually. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted September 2, 2013 Supporters Share Posted September 2, 2013 Ian, if you're after a plastic S10 filter instead I can provide one in the near-ish future, off longterm sick at the moment but as soon as I get back to base you're welcome to the filter that's on my old respirator, though it's been exposed to the air (and a shitload of CS) for 6 years now so as an actual filter I imagine it's next to useless! Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted September 3, 2013 Supporters Share Posted September 3, 2013 Sounds like a plan, James. Let me know when and I'll PP you some P&P. I mean yeah, I could dremmel one but then I'd have to bend it just right to get it back together in a way in which glue would hold. Could you PM me your address then blueangelical? I'll get them in the post to you ASAP. Glad to see I'm not the only one who uses quick access zips on his boots They're so good. I honestly can't imagine going back to messing about with laces, especially when they're wet and/or muddy. Link to comment Share on other sites More sharing options...
Blueangelical Posted September 3, 2013 Share Posted September 3, 2013 Sure, no worries. Yeah the zips are sooooo useful. I've got them on both of my para boots. I've laced them up with 550 paracord so if I need a bit it's there, but always use the zips. When you get home after a hard day playing and you're cold, wet and dirty, zip and they're off. Excellent. Really strong too, only had one bust on me after years of abuse. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Baz JJ Posted September 3, 2013 Share Posted September 3, 2013 See the Bayonets thread. Link to comment Share on other sites More sharing options...
Sam_G Posted September 3, 2013 Share Posted September 3, 2013 YAY most of my stuff arrived! Just the serpa panel to come! and will be picking up a BFG on friday! Shinobi and M_P 2 Link to comment Share on other sites More sharing options...
Kaza66 Posted September 3, 2013 Share Posted September 3, 2013 Bought a WE Glock series CO2 mag today! Order came to around £30 inc P&P from Milspec solutions. Not particularly looking forward to chaning the part though. Sounds like a bit of a nightmare. Shinobi 1 Link to comment Share on other sites More sharing options...
RICHARD-AK47 Posted September 3, 2013 Share Posted September 3, 2013 devil .20 bb's - another neoprene mask Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted September 3, 2013 Supporters Share Posted September 3, 2013 unf! it's so sexy, I want to lick it all over, but it tastes bad Shinobi 1 Link to comment Share on other sites More sharing options...
Kaza66 Posted September 3, 2013 Share Posted September 3, 2013 I want to lick it all over, but it tastes bad That's what she said... Or maybe not... Shinobi 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted September 3, 2013 Supporters Share Posted September 3, 2013 £3.80 delivered ~ fleabay. I ordered an Eagle Force steel bipod for my SVD too and another midcap while I was at it from uncompany, but I haven't had a confirmation email with invoice from them yet, so I dunno if that will happen. Link to comment Share on other sites More sharing options...
Suzuki Yamamoto Posted September 4, 2013 Share Posted September 4, 2013 Thanks mate. Unfortunately they only do varifocals, which i need, if you've had them before and can send your old pair. I need varifocals but i haven't bothered to get any yet! You can send in your old pair to be reglazed or send in new frames. They have a good selection of varifocal lenses. Link to comment Share on other sites More sharing options...
Supporters sp00n Posted September 4, 2013 Supporters Share Posted September 4, 2013 Just got my blackhawk knee pads Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted September 4, 2013 Supporters Share Posted September 4, 2013 You can send in your old pair to be reglazed or send in new frames. They have a good selection of varifocal lenses. Yeah, but i have never got around to having any varifocals made for me before. They require that you not get your 1st pair from them. I spose because it can be a pain in the arse getting a customer set with them 1st time. Link to comment Share on other sites More sharing options...
Jolley Posted September 5, 2013 Share Posted September 5, 2013 G&G raider xl (m4) ebb Asg sten and JG G3 from a mate G3 a lil busted up but make a good project gun as finding parts for it is a nightmare Link to comment Share on other sites More sharing options...
Baz JJ Posted September 5, 2013 Share Posted September 5, 2013 Ive ordered a Viper belt and some other bits and pieces for my knife frog so i can wear it at my hip. Link to comment Share on other sites More sharing options...
Suzuki Yamamoto Posted September 5, 2013 Share Posted September 5, 2013 Yeah, but i have never got around to having any varifocals made for me before. They require that you not get your 1st pair from them. I spose because it can be a pain in the arse getting a customer set with them 1st time. Ahhhh, I get ya. Fair do's. Link to comment Share on other sites More sharing options...
Baz JJ Posted September 6, 2013 Share Posted September 6, 2013 An anglesight Link to comment Share on other sites More sharing options...
Sam_G Posted September 6, 2013 Share Posted September 6, 2013 Got a police training impact grenade, with 9mm and primer adapters, 100 primers and some new OD combats. AirsoftTed 1 Link to comment Share on other sites More sharing options...
AirsoftTed Posted September 6, 2013 Share Posted September 6, 2013 Where'd you get the combats from Sam? I've been after a good quality pair! Link to comment Share on other sites More sharing options...
Supporters sp00n Posted September 6, 2013 Supporters Share Posted September 6, 2013 wooooohooooo have just ordered me a MP5 S-mag ( i think that should have been C-mag as the pics and capicity are of the C-mag etc) from Tiger111HK been looking for one for ages lol Link to comment Share on other sites More sharing options...
Sam_G Posted September 7, 2013 Share Posted September 7, 2013 Where'd you get the combats from Sam? I've been after a good quality pair! If you want good ones for around £35 try UKMCpro.co.uk they have TruSpec 24/7 combats in OD. I was going to get those but was also looking for some old US woodland ones so just went to local surplus. Picked up some repro M65 combats for £20! Should do the job as these are more for work than skirmishing in. Link to comment Share on other sites More sharing options...
AirsoftTed Posted September 7, 2013 Share Posted September 7, 2013 Thanks mate I'll check them out! Also after US woodland too lol! That surplus store happen to have a website? Link to comment Share on other sites More sharing options...
Unrustle_Thine_Jimmies Posted September 7, 2013 Share Posted September 7, 2013 ALICE Y Harness,from Army Bargains in Dublin,15€. Far cheaper than getting the Miltec clone from 18£+Shipping or getting the same thing from the US at ludicrous prices. AirsoftTed 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now