Mikey80 Posted January 22 Share Posted January 22 Just wondered what peoples thoughts on the Tokyo marui Glock 17 gen5 mos were and how long these new releases normally take to touch down this side of the water, I’m torn between ordering a gen4 or holding out for the gen5 bit on the fence as I’m not a massive fan of the the slide colour of the gen 5 but thinking performance wise it’s got to be a step up Mr Dellski 1 Link to comment Share on other sites More sharing options...
Sewdhull Posted January 22 Share Posted January 22 I think the changes are pretty much cosmetic. Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 22 Share Posted January 22 I’m guessing a Redesigned BBU unit for the optics option ? Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted January 22 Share Posted January 22 Redesigned BBU, MOS cut for optic plates but typically only fits Maruis RDS. Carbon reinforced plastic and new mag design too. Link to comment Share on other sites More sharing options...
Hatchet Posted January 22 Share Posted January 22 (edited) Have been eyeing these myself, despite having a Gen 4. Hyperdouraku did a decent write up. Apparently 20% more gas capacity due to new magazines with different internals (not just orange follower) as well as a stronger kick from redesigned BBU. Video with more details and test firing too. Machsaki has done a couple of reviews too. Edited January 22 by Hatchet Edited for clarity. Link to comment Share on other sites More sharing options...
Krisz Posted January 22 Share Posted January 22 (edited) 1 hour ago, Mikey80 said: Just wondered what peoples thoughts on the Tokyo marui Glock 17 gen5 mos were and how long these new releases normally take to touch down this side of the water, I’m torn between ordering a gen4 or holding out for the gen5 bit on the fence as I’m not a massive fan of the the slide colour of the gen 5 but thinking performance wise it’s got to be a step up Not necessarily. The more weight you put on the slide the more you lose on gas efficiency. In this case I'd assume most people would run some kind of optics on it. Probably it takes a few months to get here if you don't want to buy it from Japan or HK. I've got the very old design Gen.3 and the newer Gen.4 and I love them both. Edited January 22 by Krisz Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted January 22 Share Posted January 22 I can’t from memory recall Marui hitting the crossbar I’d wait and get the gen 5 unless I was bursting to get a pistol (which I hardly use anyhoo) Link to comment Share on other sites More sharing options...
Ak74mn Posted January 23 Share Posted January 23 Hi guys I do have ordered one from impulse101 Airsoft but they stuck on Uk customs for about month now do anyone knows how to sort that out many thank you Link to comment Share on other sites More sharing options...
JimFromHorsham Posted January 23 Share Posted January 23 (edited) 30 minutes ago, Ak74mn said: Hi guys I do have ordered one from impulse101 Airsoft but they stuck on Uk customs for about month now do anyone knows how to sort that out many thank you Have a trawl through , it may be of help 👍🏼 Edited January 23 by JimFromHorsham Link to comment Share on other sites More sharing options...
1st commando Posted January 23 Share Posted January 23 3 hours ago, Ak74mn said: Hi guys I do have ordered one from impulse101 Airsoft but they stuck on Uk customs for about month now do anyone knows how to sort that out many thank you Did you give them your UKARA or site membership number for the package ? Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted January 23 Share Posted January 23 (edited) The mags disassemble through pins, which I think is a step backwards. The slide is apparently a new material, which should be good. I read that the mags were improved because of the diecast material, but they said that about the Gen.4 as well. Also it seems to have the same 15mm BBU as the Gen.4, although presumably a different shape. Don't forget it also depends if you like finger groves on your grip or not. As a RIF I think it's cool if it's from a film, show or game you really like. I'm not sure what the Gen.5 17 has been featured in yet? I will also add it depends on what you want to do with it. I've just done a full FDE Gen.4 build with 100% Guarder upper, it's beautiful and works very well. They're working on it as we speak, but it'll be a while before Guarder parts are readily available. Edited January 23 by Cr0-Magnon Link to comment Share on other sites More sharing options...
Ak74mn Posted January 23 Share Posted January 23 1 hour ago, 1st commando said: Did you give them your UKARA or site membership number for the package ? Hi.yes 4 hours ago, JimFromHorsham said: Have a trawl through , it may be of help 👍🏼 Hi. Thank you Link to comment Share on other sites More sharing options...
theSwede Posted January 23 Share Posted January 23 https://www.tokyomaruiairsoft.com/product-page/g17-gen-5-mos It seems the bbu volume is increased from the gen4. Also the gun seems to be lighter than at least the gen3. Dont know the weight of the gen4 Link to comment Share on other sites More sharing options...
hunter511 Posted January 23 Share Posted January 23 Im liking the look of that. Might have to go back to glocks after all..... Link to comment Share on other sites More sharing options...
JimFromHorsham Posted February 16 Share Posted February 16 👀 gavinkempsell, Enid_Puceflange and Mr Dellski 1 2 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted February 16 Share Posted February 16 3 minutes ago, JimFromHorsham said: 👀 OOOOOOOH You big tease! Where’d you order that from? Link to comment Share on other sites More sharing options...
Mr Dellski Posted February 16 Share Posted February 16 47 minutes ago, JimFromHorsham said: 👀 Ahhh mannnnn!!! Link to comment Share on other sites More sharing options...
JimFromHorsham Posted February 16 Share Posted February 16 47 minutes ago, Enid_Puceflange said: OOOOOOOH You big tease! Where’d you order that from? https://www.surplusstore.co.uk/tokyo-marui-g17-gen5-mos-gbb-pistol.html Mr Dellski and Enid_Puceflange 2 Link to comment Share on other sites More sharing options...
Mr Dellski Posted February 16 Share Posted February 16 4 minutes ago, JimFromHorsham said: https://www.surplusstore.co.uk/tokyo-marui-g17-gen5-mos-gbb-pistol.html You already know Jim. You already know 😂 Link to comment Share on other sites More sharing options...
Mr Dellski Posted February 16 Share Posted February 16 Ordered! JimFromHorsham 1 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted February 16 Share Posted February 16 Liking the look of this a lot To save me going to look it up, is the optics mount a standard one, or does it only take the plastic red dot they sold with the D.O.R Hi Capa? (Not sure why I'm asking really, I can't afford £170 on a new pistol, however cool it looks) Link to comment Share on other sites More sharing options...
1st commando Posted February 17 Share Posted February 17 It uses the TM pro sight . The recoil feels more snappy and I like the finish they used on the slide a lot but not enough for me to go back to a TM Glock RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted February 17 Popular Post Share Posted February 17 Indeed , very typical TM , great fit and finish , lightweight and very snappy cycle. I’m sure someone will release an adapter plate for it very soon to open up the RMR options . Mr Dellski, Madhouse, Enid_Puceflange and 2 others 5 Link to comment Share on other sites More sharing options...
Madhouse Posted February 20 Share Posted February 20 Oooh, I like that! Don't suppose it's got a threaded barrel? Or do you need an aftermarket one to fit a tracer? Link to comment Share on other sites More sharing options...
Mr Dellski Posted February 20 Share Posted February 20 2 hours ago, Madhouse said: Oooh, I like that! Don't suppose it's got a threaded barrel? Or do you need an aftermarket one to fit a tracer? Nope.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now