The AAP-01 Owners Thread.

[Spartan09]

  On 01/08/2021 at 23:06, AlphaBear said:

.

Update: I have joined the drum mag club... well in a couple of days

 

@Spartan09 thx for the heads up!!

 

 

 

Expand  

welcome to the club 😃

happy i could help

[leadly]

  On 01/08/2021 at 23:06, AlphaBear said:

.

Update: I have joined the drum mag club... well in a couple of days

 

@Spartan09 thx for the heads up!!

 

 

 

Expand  

 

Brilliant! Reloading is soooooo overrated!!

[AlphaBear]

  On 02/08/2021 at 06:21, leadly said:

 

Brilliant! Reloading is soooooo overrated!!

Expand  

Especially if you only have one std mag in the first place 😆

 

Now to grab that AAP CNC hammer from Airsoftworld 

[Skara]

The drum mag is inviting, but the weight is definitely not

 

I still need to pull the plug on two more AW extendos but I don't use the smg enough to justify them.

[Albiscuit]

AAP and drum mag kicked arse last weekend at CQB. I found the weight of the Drum mag a pain in the are after a while, but whilst crouching the gun was perfect height when I balanced the bottom of the drum mag on top of my knee   

[AlphaBear]

I figured out a holster solution too for the drum mag. A dump pouch 😂

 

Airsoftworld have the aap cnc  hammer for £20. I’ll add a few other bits to the order once I figure out what extra I need. mind you they are out of stock on many items sadly. A rear rail for a rmr is probably a good idea but it will probably get shot out in cqb anyway so scrap that idea. 

[leadly]

I can only assume that when used with just the pistol the drum mag could be a bit cumbersome but on my AAP SMG it's weighted just right!!

[AlphaBear]

It’s here 😂😂

This thing is bonkers on auto. It’s like a mini support gun 😂😂😂

[leadly]

Tap that ass!!!

[AlphaBear]

  On 03/08/2021 at 15:05, leadly said:

Tap that ass!!!

Expand  

Unfortunately I don’t have any HPA gear so wouldn’t know how to tap the darn thing. Roll on YouTube I guess.
 

Is the tap modification to the drum mag permanent?  

Edited August 3, 2021 by AlphaBear

[Shaydee]

  On 03/08/2021 at 16:25, AlphaBear said:

Unfortunately I don’t have any HPA gear so wouldn’t know how to tap the darn thing. Roll on YouTube I guess.
 

Is the tap modification to the drum mag permanent?  

Expand  

 

Nope, It's just a fill valve replacement. If you want to take it back to gas you unscrew and pop the old valve back in.

[PopRocket123]

Can't stand drums so can anyone recommend some extended mags that work with the AAP?

[AlphaBear]

  On 03/08/2021 at 18:20, PopRocket123 said:

Can't stand drums so can anyone recommend some extended mags that work with the AAP?

Expand  

The WE EU17/18 mags I believe work. Patrol base have them for £40.  You just need to confirm the gas router is the non MOS one flat not curved. Call them first though and see if they can send you a pic of the gas router. 

.

https://www.patrolbase.co.uk/we-europe-eu-series-eu17-18-extended-50rnd-gas-magazine

[leadly]

I've got a couple of the WE extended mags that work well! Never had any issues with them, however they haven't seen much use!

[Skara]

  On 03/08/2021 at 18:20, PopRocket123 said:

Can't stand drums so can anyone recommend some extended mags that work with the AAP?

Expand  

I'm using an AW one, it's working fairly well and it's €10 cheaper than them WEs.

I'll buy a couple more whenever I have some spare cash

[AlphaBear]

  On 04/08/2021 at 07:54, Skara said:

I'm using an AW one, it's working fairly well and it's €10 cheaper than them WEs.

I'll buy a couple more whenever I have some spare cash

Expand  

Spare cash? Does that concept actually exists when it comes to airsoft 😂😂

[AlphaBear]

I’ve come to the conclusion the stock hop rubber is utter pants. The consistency between each shot is like Dolly Parton jumping up and down on a trampoline. Time to swap it out for a Sniper Mechanics Pink Flamingo 50 degrees rubber. I also have a spare H-Plate which I bought for my MK23 but don’t need to install it in the 23. Am I right in assuming it will work with the AAP’s stock hop unit?

Edited August 7, 2021 by AlphaBear

[AlphaBear]

This is the CNC H-plate I have spare. I assume it will be fine for the AAP-01?

 

https://www.skirmshop.co.uk/cnc-h-plate.html

[Steveocee]

  On 07/08/2021 at 17:10, AlphaBear said:

I’ve come to the conclusion the stock hop rubber is utter pants. The consistency between each shot is like Dolly Parton jumping up and down on a trampoline. Time to swap it out for a Sniper Mechanics Pink Flamingo 50 degrees rubber. I also have a spare H-Plate which I bought for my MK23 but don’t need to install it in the 23. Am I right in assuming it will work with the AAP’s stock hop unit?

Expand  

It's not the bucking, they're actually quite good. It's the stock nozzle valve spring that needs swapping out.

[AlphaBear]

  On 07/08/2021 at 18:54, Steveocee said:

It's not the bucking, they're actually quite good. It's the stock nozzle valve spring that needs swapping out.

Expand  

Ahhhh ok that could explain why at 40m it was all over the place. Is the stock hop unit ok then?

[Fatboy40]

For me a Maple Leaf Autobot 60 Degree 2021 Silicone, just that on its own, radically changed the accuracy / grouping. Previously shown veered slight to the left and grouping was OK'ish, post the Maple Leaf swap shots were dead center and 20m or so grouping was infinitely better.

 

The stock hop unit is great, I saw no need to replace it.

[AlphaBear]

Has anyone used a CNC H plate in their hop unit similar to what you can do with the MK23?

 

I also have a Modify Tan hop which many people  use on the MWS which I believe is 60-65 degree and that's a really good rubber so I've been told. Although I still use a Marui rubber in mine which I can't fault..

 

https://www.skirmshop.co.uk/tan-accurate-hop-up-bucking-1st-class-aircraft-rub.html

[Steveocee]

  On 07/08/2021 at 19:16, AlphaBear said:

Ahhhh ok that could explain why at 40m it was all over the place. Is the stock hop unit ok then?

Expand  

 

Yeah it's really quite good. A h plate does wonders if you want to hop .4+ as well.

Modify tan bucking would be really with a punt, have to ask yourself though, does your pistol need to fling a .4 out 60+ metres if it's not a DMR?

[sp00n]

Finally at a game day, filled up my drum mag …. Went to wind it …. Nothing happened

 

unloaded it, fresh bb’s etc … still won’t wind, winder just spins

 

stripped it …

 

outer looks ok ….

 

 

ah! … that missing gear on the winder … that’ll do it 😵‍💫😞

[AlphaBear]

  On 08/08/2021 at 11:50, Steveocee said:

 

Yeah it's really quite good. A h plate does wonders if you want to hop .4+ as well.

Modify tan bucking would be really with a punt, have to ask yourself though, does your pistol need to fling a .4 out 60+ metres if it's not a DMR?

Expand  

 That’s what my MK23 can do. The AAP is here just for  giggles 🤭 to be fair. It’s gonna be my HPA experiment at some point 🙌🏼  
 

Incidentally out of all my pistols I use my HK45 as my preferred backup. I just prefer the look and feel of it. 

  On 08/08/2021 at 12:16, sp00n said:

Finally at a game day, filled up my drum mag …. Went to wind it …. Nothing happened

 

unloaded it, fresh bb’s etc … still won’t wind, winder just spins

 

stripped it …

 

outer looks ok ….

 

 

ah! … that missing gear on the winder … that’ll do it 😵‍💫😞

Expand  

Blimey. You should drop AW a mail and show them this. This shouldn’t be happening.