Rory Posted July 10 Share Posted July 10 Got a bit fed up waiting for the resin delivery and used some cam tape. Will remove and finish all black eventually. Hopefully the longer curved pistol grip allows smoother cocking and takes the jerking motion off my wrist, need that for… “other things”…. Egon_247 and Rogerborg 2 Link to comment Share on other sites More sharing options...
MorganL Posted July 11 Share Posted July 11 The amount of stuff I've made now is quite long, currently working on a more effective target box the amazon box stuff with rag is getting a little beat up lol. Sheet contsruction with a replacable A4 target sheet at the front, angle back should deflect any bbs that make it through PVC curtain strips i'll afix to the top plate and foam in the bottom tray should work, I'll let everyone know how it goes :). Link to comment Share on other sites More sharing options...
The_Lord_Poncho Posted July 11 Share Posted July 11 38 minutes ago, MorganL said: The amount of stuff I've made now is quite long, currently working on a more effective target box the amazon box stuff with rag is getting a little beat up lol. Sheet contsruction with a replacable A4 target sheet at the front, angle back should deflect any bbs that make it through PVC curtain strips i'll afix to the top plate and foam in the bottom tray should work, I'll let everyone know how it goes :). Looks really good - I've long been planning to make something similar. Is yours to be made from sheet metal? Mine is more likely to be an MDF creation. Link to comment Share on other sites More sharing options...
MorganL Posted July 11 Share Posted July 11 45 minutes ago, The_Lord_Poncho said: Looks really good - I've long been planning to make something similar. Is yours to be made from sheet metal? Mine is more likely to be an MDF creation. Yeah all sheet metal, riveted except for one side which will be bolted for access, I've got a laser cutter so easier to do things out of metal :), MDF would probably help to be less noisy if any hit the sides though. Link to comment Share on other sites More sharing options...
HuttArmouries Posted July 14 Share Posted July 14 Finally started work on the box mag for the hk21. Has internals from an ares lmg box which will be wired to a pressure switch. Hpa adaptor goes in through the back as ive drilled and tapped a hole in the back of the mag. Cocha, gavinkempsell and Egon_247 2 1 Link to comment Share on other sites More sharing options...
Popular Post MorganL Posted July 18 Popular Post Share Posted July 18 Quick make for today, custom glock foam for a nuptial case. gavinkempsell, Cocha, DanBow and 2 others 5 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 18 Share Posted July 18 Tidy job. Link to comment Share on other sites More sharing options...
MorganL Posted July 26 Share Posted July 26 So have just made myself a custom Pelican 1510 loadout to take with me as my MWS brakes down pretty easy and the gun box I bought was way too big for taking on a train. Wondering if anyone else would be interested in something like this can accomidate other boxes I just had a spare 1510 laying around un used. Jedi_Master, gavinkempsell, DanBow and 1 other 1 3 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 26 Share Posted July 26 Nicely done. Link to comment Share on other sites More sharing options...
SSPKali Posted August 17 Share Posted August 17 Playing about mounting my Kywi pouches with 1” velcro one-wrap and with some off cut paracord made this quick access TQ* mount. Pull down on the red handle and it is instantly accessible. Probably 1001 things you can do with one-wrap, need to order a big roll as so handy for strap / cable management. *don’t buy knock off TQs unelss you clearly mark them FAKE. If you carry a real one get some basic first aid training (hint: very little of it involves tourniquets!) TheFull9, Egon_247 and ButcherBill 1 1 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted August 20 Share Posted August 20 On 11/07/2024 at 16:25, MorganL said: Yeah all sheet metal, riveted except for one side which will be bolted for access, I've got a laser cutter so easier to do things out of metal :), MDF would probably help to be less noisy if any hit the sides though. Put some of that sticky car sound deadening stuff inside it, that'd be awesome at shutting it up. Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 21 Share Posted August 21 Spent a couple of hours “crafting” an adapter out of steel scaffold pipe to allow my SF-DI to accept 12g booms as well as the primer charges Shall find out on Sunday if it’s a success 😂 ButcherBill and Tackle 1 1 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted August 21 Moderators Share Posted August 21 19 minutes ago, Enid_Puceflange said: Spent a couple of hours “crafting” an adapter out of steel scaffold pipe to allow my SF-DI to accept 12g booms as well as the primer charges Shall find out on Sunday if it’s a success 😂 Looks great mate, what's the worst that could happen 🤔 Lozart 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 21 Share Posted August 21 (edited) 43 minutes ago, Tackle said: Looks great mate, what's the worst that could happen 🤔 Yeah, I will literally be throwing caution to the wind but in a safe controlled manner it’s just a shim in a stainless body, I can’t find the manufacturers one for sale anywhere But point taken, I’ll maybe just use them in the Dynatex which is designed for the 12G’s🙃 Edited August 21 by Enid_Puceflange Tackle 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted August 21 Share Posted August 21 If you cut groves in the pipe the shrapnel won't do as much damage. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 21 Share Posted August 21 Just now, ButcherBill said: If you cut groves in the pipe the shrapnel won't do as much damage. Yeah, yeah, yeah you have both sensibly talked me out of using it now 🫶🏼 ButcherBill and Tackle 1 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted August 21 Share Posted August 21 That's what we're here for... and to take the piss of course. Tackle and SSPKali 2 Link to comment Share on other sites More sharing options...
Moderators Tackle Posted August 21 Moderators Share Posted August 21 20 minutes ago, Enid_Puceflange said: Yeah, I will literally be throwing caution to the wind but in a safe controlled manner it’s just a shim in a stainless body, I can’t find the manufacturers one for sale anywhere But point taken, I’ll maybe just use them in the Dynatex which is designed for the 12G’s🙃 I'm just kidding, give it a try a few times in a safe area before game on, I'm sure it'll be fine. Enid_Puceflange 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted August 21 Share Posted August 21 1 hour ago, Tackle said: I'm just kidding, give it a try a few times in a safe area before game on, I'm sure it'll be fine. Im sure it would be, the base that holds the charges is far more substantially made than the Dynatex loading cap The insert is a steel tube that slips into the stainless base of the SF-DI But as it’d be getting rolled towards someone….. “Safety First” At least it consumed a couple of hours today, a nice distraction 😂 ButcherBill and Tackle 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted August 21 Supporters Share Posted August 21 Actual shotgun barrels that fire shot down them can, comparatively, be notoriously weak when put up against any pistol or rifle barrel; just blasting airsoft grade blanks shouldn't really test any steel that's not just chinese factory floor scrapings mushed together. Enid_Puceflange and Lozart 2 Link to comment Share on other sites More sharing options...
Amokura Posted August 28 Share Posted August 28 I turned a .50 storage box into a foam container for my pistol magazines. Egon_247 and ButcherBill 2 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted 8 hours ago Share Posted 8 hours ago Finally started a Crye MR-C build. I've been wanting to make one of these ever since GRAW came out on the Xbox 360 - 3D printing (and affordable design software) is now making happen after being on the back-burner for over a decade. It's just a wall-hanger/prop. Maybe one day I'll make a functional Airsoft gun but I'm not too bothered on that front. Still have a good dozen hours of printing, then numerous more hours of sanding, filling and painting. Stitch bitches should note this takes design elements from the two mock-ups I have found in my searches, and Crye's own low-res 3d renderings (they all differ slightly), along with some small creative liberties taken on my part (i.e trigger and ambi fire selector). TheFull9 and PopRocket123 1 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted 8 hours ago Share Posted 8 hours ago 12 minutes ago, Speedbird_666 said: Stitch bitches love it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now