Mad dog 49 Posted May 12 Share Posted May 12 So, what are the latest ideas on eliminating, or reducing bolt bounce? I've seen Ollies videos on the subject, but am I looking for a heavier buffer weight or a lighter one? Link to comment Share on other sites More sharing options...
Salamanca Posted May 12 Share Posted May 12 (edited) I have cured MWS bolt-bounce with an Angry gun heavy buffer and a heavier spring. It seems a problem that some rifles suffer and some do not, as I have had this problem with just one of my rifles. You may be able to cure it with one of those buffer weights fitted with small weights inside, which I recall is what Ollie used. Edited May 13 by Salamanca Mad dog 49 1 Link to comment Share on other sites More sharing options...
zizivert Posted May 13 Share Posted May 13 Hi guys, i received and installed my G&p steel trigger box (the gold one) with my 60° fire selector revanchist. With Tm trigger box and this fire selector no problem. But since I installed the G&p trigger box I have the same problem. Full in semi or full position. I tried lot of adjustement without success. I have to try two more solutions. Clean the trigger box entirely to remove all the ptfe grease and use 90° fire selector (but I need to buy one). Do you have an idea where I should look? I don’t think it comes from the selector but I’m lost and I don’t know where to start to fix this problem. I didn’t find anything about the adjustement of this trigger so I used the same procedure as for the GM trigger box… Link to comment Share on other sites More sharing options...
zizivert Posted May 15 Share Posted May 15 So I start a test. The G&p trigger in the TM trigger box = no problem. Now I need to test the revanchist trigger in the G&p box. Maybe later. I need to do my first job, be a father. Link to comment Share on other sites More sharing options...
Shamal Posted May 15 Share Posted May 15 43 minutes ago, zizivert said: So I start a test. The G&p trigger in the TM trigger box = no problem. Now I need to test the revanchist trigger in the G&p box. Maybe later. I need to do my first job, be a father. Yes father first,toys later. Or when we are babies it's toys first,father later. Funny old life🤔 zizivert 1 Link to comment Share on other sites More sharing options...
zizivert Posted May 15 Share Posted May 15 So, revanchist trigger in G&p trigger box, same problem. Full in semi position. So for me two options, the problem is somewhere else in the trigger box, or, the 60° fire selector generate this problem with the G&p trigger box. I need to wait the classic fire selector i ordered to eliminate this last option. If the problem continue even with the 90° fire selector I will check and compare one by one all the G&p part with the TM trigger box parts. Maybe I will find something. Link to comment Share on other sites More sharing options...
zizivert Posted May 17 Share Posted May 17 I finally solved my problem yesterday night. There are some play on the G&p trigger parts, in lateral way. These play generates problem/interference with the fire selector selector. So I reworked the fire selector to allow the parts to move all it’s way in lateral mouvement and now, no more problem. Enid_Puceflange and Nick G 2 Link to comment Share on other sites More sharing options...
Popular Post GothicGhost Posted May 18 Popular Post Share Posted May 18 Magpul bits arrived, I just need to buy the OD stock and trigger guard next 😁 gavinkempsell, Mr Dellski, rj1986 and 3 others 6 Link to comment Share on other sites More sharing options...
Davegolf Posted May 20 Share Posted May 20 I did that build many moons ago, its so simple and light, classic front sight post, nice! GothicGhost 1 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted May 20 Share Posted May 20 Reminds me of this…which I really like: O3Tactical and GothicGhost 1 1 Link to comment Share on other sites More sharing options...
SSPKali Posted May 20 Share Posted May 20 Bringing Airsoft-forums kicking and screaming into the 21st Century I asked ChatGPT to summerise the previous 275 pages. Question for experienced users, how did it do? n00bs - take with a pinch of salt! The thread on the Airsoft Forums UK about the Tokyo Marui MWS spans numerous pages and provides extensive insights into various upgrades, performance enhancements, and common pitfalls to avoid for this popular gas blowback rifle (GBBR). ### Key Upgrades 1. **Barrel and Hop-Up Units**: - **Prometheus and PDI Barrels**: Users frequently recommend upgrading to a tight bore barrel from brands like Prometheus or PDI to improve accuracy and range. - **Maple Leaf Buckings and Hop-Up Units**: Maple Leaf hop-up rubbers and units are favored for their consistency and performance in varying weather conditions. 2. **Bolt Carrier Group (BCG)**: - **Guns Modify Enhanced BCG**: Upgrading to a Guns Modify bolt carrier is advised for enhanced durability and smoother cycling. - **Ratech Steel Bolt**: For increased longevity, especially under high-stress conditions, Ratech steel bolts are popular among experienced users. 3. **Internal Parts**: - **NPAS (Negative Pressure Air System)**: Installing an NPAS allows for easy adjustment of FPS, making the rifle versatile for different field requirements. - **Upgraded Nozzles**: Users often suggest upgrading to reinforced nozzles from brands like Angry Gun to prevent breakages under high-pressure gas use. 4. **Magazines**: - **G&P and Prowin Magazines**: These magazines are noted for their improved gas efficiency and reliability compared to the stock versions. - **Magazine Valves**: Upgrading to high-flow magazine valves can enhance the gas efficiency and consistency of shots. 5. **External Parts**: - **Handguards and Stocks**: Many users customize their MWS with Magpul or BCM handguards and stocks for better ergonomics and personal preference in aesthetics and handling. - **Rails and Mounts**: Upgrading to lightweight rail systems from brands like Daniel Defense or Geissele is common for reducing weight and adding accessories like optics and grips. ### Things to Avoid 1. **Cheap Internal Upgrades**: Avoid low-cost internal parts that promise high performance but often fail under pressure, leading to more frequent repairs and inconsistent performance. 2. **Overpowered Gas**: Using green gas or other high-powered gases can cause undue wear on internal parts if not properly upgraded to handle the increased pressure. 3. **Non-Specific Accessories**: Generic accessories that are not designed for the TM MWS can lead to poor fitment and performance issues. It’s essential to use parts specifically designed for this model to ensure compatibility and reliability. 4. **DIY Modifications**: Unless you have extensive experience, DIY modifications to the gas system or hop-up unit can lead to more harm than good. It’s recommended to use tested and reviewed upgrade kits. ### General Tips - **Regular Maintenance**: Regular cleaning and lubrication of the bolt carrier group and other moving parts are essential to maintain performance and longevity. - **Field Testing**: Always test your upgrades in a controlled environment before taking them into a game to ensure reliability and performance. - **Community Insights**: Engage with the airsoft community for advice and reviews on the latest upgrades and modifications to keep your TM MWS in top condition. For detailed discussions and personal experiences, the Airsoft Forums UK thread is an excellent resource where community members share their insights and updates on the TM MWS【6†source】【7†source】【8†source】【9†source】. Jacob Wright 1 Link to comment Share on other sites More sharing options...
Cipher-032 Posted May 25 Share Posted May 25 What are peoples go to hop rubbers now? My modify tan is looking a little worse for wear. I can remember seeing that they have recently suffered QC issues? Im really not interested in running Maple leaf. Link to comment Share on other sites More sharing options...
StoveCap Posted May 25 Share Posted May 25 4 hours ago, Cipher-032 said: What are peoples go to hop rubbers now? My modify tan is looking a little worse for wear. I can remember seeing that they have recently suffered QC issues? Im really not interested in running Maple leaf. Unicorn is the most common recommendation I see. 4uad's new bucking is apparently alright. Flamingos are also pretty high up there. Then obviously Nineball. Link to comment Share on other sites More sharing options...
GothicGhost Posted May 27 Share Posted May 27 After doing some readingI thinking going these upgrades. Bavtac Nub, Laylax(Prometheus) 6.03mm (370mm), Maple Leaf MR. Hop Up 60 Degree, I use 0.32 at the moment. Thanks. SSPKali 1 Link to comment Share on other sites More sharing options...
SSPKali Posted May 27 Share Posted May 27 11 hours ago, GothicGhost said: After doing some readingI thinking going these upgrades. Bavtac Nub, Laylax(Prometheus) 6.03mm (370mm), Maple Leaf MR. Hop Up 60 Degree, I use 0.32 at the moment. Thanks. 370mm barrel will increase the power, cool if you are after that but a pain if you end up over chrono limit 😂 Link to comment Share on other sites More sharing options...
GothicGhost Posted May 29 Share Posted May 29 On 27/05/2024 at 23:50, SSPKali said: 370mm barrel will increase the power, cool if you are after that but a pain if you end up over chrono limit 😂 That is true, I might leave upgrading the inner barrel until I get a NPAS On 20/05/2024 at 09:56, Wavey_Gravey said: Reminds me of this…which I really like: Nice I need to get a flared magwell. Link to comment Share on other sites More sharing options...
AlphaBear Posted June 8 Share Posted June 8 Not been online here for almost a year! What have I missed in the MWS world? Link to comment Share on other sites More sharing options...
AlphaBear Posted June 9 Share Posted June 9 @Davegolftime to lube the MWS as it's not been used in over a year! Gunsav and gun oil in all the usual places? Link to comment Share on other sites More sharing options...
Davegolf Posted June 9 Share Posted June 9 Yeh just the usual pre/post game prep, whip the piston out and TechT GunSav the seal/bore, wipe down all the mateal on metal with a lint free cloth / isopropyl wipe, apply gun oil. Check the barrel/bucking is clear and clean. Enjoy, prime GBBR weather! AlphaBear 1 Link to comment Share on other sites More sharing options...
Jigorugu Posted July 2 Share Posted July 2 Hello people , I have a issue with my mws . So I am using this combo : maple leaf crazy jet inner barell, stock hopup chamber, laylax hop arm , maple leaf mr.hop . So clearly is not about unproper instalation cause I did it for several times , so what cause this misalignment ? 20240702_161512.mp4 20240702_161512.mp4 20240702_161512.mp4 Link to comment Share on other sites More sharing options...
Davegolf Posted July 3 Share Posted July 3 It can only be a duff bucking or the hop arm is duff/skewing under pressure. Link to comment Share on other sites More sharing options...
zizivert Posted July 3 Share Posted July 3 Did you try to turn lightly the inner barrel clockwise? There is a little play wich can create this trouble. Link to comment Share on other sites More sharing options...
Jigorugu Posted July 3 Share Posted July 3 I think I found out that this barrel crazy jet maple leaf is not good with maple leaf 60° mr.hop , just because the window cut is smaller that the rubber's nub , so that's is causing that misalignment. So I was bad advised about that 2 parts togheter GothicGhost 1 Link to comment Share on other sites More sharing options...
zizivert Posted July 4 Share Posted July 4 Using the good tools and with patience you can open the window of the crazy jet inner barrel. Link to comment Share on other sites More sharing options...
GothicGhost Posted July 6 Share Posted July 6 On 03/07/2024 at 18:59, Jigorugu said: I think I found out that this barrel crazy jet maple leaf is not good with maple leaf 60° mr.hop , just because the window cut is smaller that the rubber's nub , so that's is causing that misalignment. So I was bad advised about that 2 parts togheter oh no, I was looking to buy a PDI barrel and use MR bucking, I assume it be the same issue looking at the PDI cut? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now