AK47frizzle Posted February 14, 2014 Posted February 14, 2014 nah it's just the good old "as soon as you buy something you find it cheaper everywhere" symptom. as for elcan on an ak, it looks excellent. Elcans look really good on an AK12. Priority now is to get an AK12. Sorry ICS Galil, you're just not good enough anymore. Ian_Gere 1
Supporters Ian_Gere Posted February 14, 2014 Supporters Posted February 14, 2014 Elcans look really good on an AK12. Priority now is to get an AK12. I would have said the same before new year, but now I'm lusting after a tactical SA Vz58. With an AK side mount and Elcan... naturally
Supporters Popular Post Ian_Gere Posted February 19, 2014 Supporters Popular Post Posted February 19, 2014 two_zero, Unrustle_Thine_Jimmies, TacMaster and 2 others 5
Unrustle_Thine_Jimmies Posted February 19, 2014 Posted February 19, 2014 We doing eastbloc stuff again? sergei,bring the onesie Ian_Gere 1
Airsoft_Mr B Posted February 19, 2014 Posted February 19, 2014 I have just been bought an M4A1 from the M4 on duty kit along with a Shotgun and a CYMA Desart Eagle for my birthday which will hopefully kick start my Skirmish games in order to get my Licence. You're using those guns for skirmishing?! Also, it's a UKARA defence not a licence. Ian_Gere 1
Supporters TheFull9 Posted February 19, 2014 Supporters Posted February 19, 2014 It's a VCRA defence. UKARA is just an association of retailers that happen to run a database.
remus Posted February 21, 2014 Posted February 21, 2014 finally getting round to taking photos and naming my guns ergo... alice jill Ian_Gere 1
TacMaster Posted February 21, 2014 Posted February 21, 2014 We doing eastbloc stuff again? sergei,bring the onesie I raise you one KJW M700 Unrustle_Thine_Jimmies and AirsoftTed 2
Unrustle_Thine_Jimmies Posted February 21, 2014 Posted February 21, 2014 Where's your bolt handle Epic choice for a gun though! First off,TAP THE MAGAZINES FOR HIGH PRESSURE AIR. KJW M700s ARE BEASTS ON HIGH PRESSURE AIR. You will also have no cooldown,and more consistent performance. You can get air tanks refilled at Scuba diving shops or paintball shops/sites. Reloading may be a pain but you can get quick detach connectors and swap mags,make sure to have long mags for it. It might be a bit expensive but worth it. If you are not comfortable drilling the mags take them to a machinist. Google about a bit on how to do it,you can get the air supply from paintball shops.
TacMaster Posted February 21, 2014 Posted February 21, 2014 Thanks UTJ bolt handle is on the opposite side, laptop camera is retarded lol. I'm fairly concerned about muzzle velocity though as I saw some US reviews stating it was over 500 fps, so I'm going to try propane first. Assuming I can get a refund from an order which never came* I'll buy a propane adaptor and a couple of cans of it next week (unless I can use propane-butane mix?) *just a heads up, DO NOT BUY from Firestorm Kit based in Reading, it's been 2 weeks since I ordered a hydration pouch and I've received nothing other than an email confirming my payment despite emailing them with no answer. The business is a 1 man band and the phone number is for a mobile which is perpetually switched off. The billing address is a private house as well. Phoning them just went straight to voicemail, so on Sunday imma go round his house with a baseball bat (just kidding, the baseball bat is actually a piece of paper with SMALL CLAIMS COURT written on it ) Airsoft_Mr B 1
TomC Posted February 21, 2014 Posted February 21, 2014 Thanks UTJ bolt handle is on the opposite side, laptop camera is retarded lol. I'm fairly concerned about muzzle velocity though as I saw some US reviews stating it was over 500 fps, so I'm going to try propane first. Assuming I can get a refund from an order which never came* I'll buy a propane adaptor and a couple of cans of it next week (unless I can use propane-butane mix?) *just a heads up, DO NOT BUY from Firestorm Kit based in Reading, it's been 2 weeks since I ordered a hydration pouch and I've received nothing other than an email confirming my payment despite emailing them with no answer. The business is a 1 man band and the phone number is for a mobile which is perpetually switched off. The billing address is a private house as well. Phoning them just went straight to voicemail, so on Sunday imma go round his house with a baseball bat (just kidding, the baseball bat is actually a piece of paper with SMALL CLAIMS COURT written on it ) Thanks for letting us know. I have been thinking of buying a osprey plate carrier from that shop for a while. TacMaster and Airsoft_Mr B 2
two_zero Posted February 21, 2014 Posted February 21, 2014 your krinkov, man!! love it! you gotta add some wear to the wood thou! Ian_Gere 1
Supporters M_P Posted February 22, 2014 Author Supporters Posted February 22, 2014 I'm fairly concerned about muzzle velocity though as I saw some US reviews stating it was over 500 fps, so I'm going to try propane first. Find a way of lowering the FPS then tap to HPA. It's a sniper rifle so consistency is everything, propane won't cut the mustard to be honest.
Supporters Ian_Gere Posted February 23, 2014 Supporters Posted February 23, 2014 your krinkov, man!! love it! you gotta add some wear to the wood thou! The wood does look more worn than this pic shows, I spose I could add a couple of gouges though. I've distressed the PBS-4 since I took this and it looks a lot better now... but... for no reason at all it has stopped feeding BB's. I hadn't done anything to it mechanically. It won't feed from any of my AK mags - the ones it has always worked with nor the 5 new ones i've recently acquired. I tried swapping back to the original mag catch. Dismantled the hop unit: everything seemed just fine, so I swapped the barrel too (which is something I've been meaning to do for a while). Dismantled the gearbox - the tappet plate, its spring & delayer are fine / so I regreased the piston head and checked compression = better than fine. Nothing has made a difference. It fires the odd shot but usually just doesn't. Checked to see if it could be mags - it fires fine with no mag upside down feeding BB's by hand/gravity - but these mags have worked with it for ages and they work in other guns V^^VGrrrrrrrrrrrrrrrrrrrrrrr!
Airsoft_Mr B Posted February 23, 2014 Posted February 23, 2014 Re-painted my CQB-R...again. This probably won't be the last time either TacMaster 1
TacMaster Posted February 24, 2014 Posted February 24, 2014 Nice, get yourself some OD Pmags for it as well
Nickona Posted February 24, 2014 Posted February 24, 2014 Do you not find that fore grip massively far forward?
Supporters M_P Posted February 24, 2014 Author Supporters Posted February 24, 2014 Depends what you find comfortable, that's exactly where I'd put one on that rifle too- though something more low profile.
toothpick-NL Posted February 24, 2014 Posted February 24, 2014 My Army L85A1 with "noob tube" and maglite flashlight and red/greendot. (photo 2010)and in 08-2013 i had this: ICS L86 LSW including laser and A&K elec. drumbox Army L85A1 (now with SUSCAT scope. standaard version) and here with "noob tube" TM M1911 SF Monty, Airsoft_Mr B and Ian_Gere 3
Popular Post Nickona Posted February 24, 2014 Popular Post Posted February 24, 2014 There appears to be some weird kind of cancerous growth attached to the mag well of your L86 Airsoft-Ed, toothpick-NL, Ian_Gere and 3 others 6
toothpick-NL Posted February 24, 2014 Posted February 24, 2014 i made it like i supposte to be in first place. A supporter. That they made it in real life as a DMR is not my thing. i use it as replacement for mij M249. http://en.wikipedia.org/wiki/L86#L86_LSW
TacMaster Posted February 25, 2014 Posted February 25, 2014 Problem with that is UK forces don't use the LSW as a supporting weapon in a conventional sense- it's only useful for range support as the barrel is fixed, so if you start spraying rounds in long bursts without giving it a chance to cool the barrel will warp and accuracy will decrease. That's why they patrol with Minimis and GPMGs.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now