Supporters Druid799 Posted June 30, 2021 Supporters Share Posted June 30, 2021 4 hours ago, Speedbird_666 said: i got lucky, my youngest son has been hounding my missus for a 3D printer for the last 6 months (he's obsessed with the idea of making his own table-top games and scenery - he's only 8 bless him), so when they were on offer via the Creality website to coincide with Amazon's prime day, she couldn't really say no. YES this ! If you can dump a sneaky purchase on the kids your in like a greased ferret ! Tackle, rj1986 and Speedbird_666 3 Link to comment Share on other sites More sharing options...
DanBow Posted February 8 Share Posted February 8 Dropped of of my mags and broke the feed lip. I've ordered a couple of spares but I found a file on Thingiverse - here - so printed one. It fits and feeds ok but the pusher doesn't go up fully to hold open the slide on mag empty. I'll give it a little fettle and see how it goes. Lozart, Scythian and Enid_Puceflange 3 Link to comment Share on other sites More sharing options...
Scythian Posted February 8 Share Posted February 8 Knocked up a shell holder for the boomstick, just one of many files on thingiverse. gavinkempsell, sp00n and DanBow 2 1 Link to comment Share on other sites More sharing options...
Popular Post HuttArmouries Posted February 10 Popular Post Share Posted February 10 so recently I designed and printed this little smg / pdw that uses glock internals. Its very snappy and works well though I will be tweaking the aesthetics a lot. Here's also another bit from the new thing im prototyping. Im sure you can guess what that is for. Egon_247, gavinkempsell, Tackle and 5 others 7 1 Link to comment Share on other sites More sharing options...
Scythian Posted February 11 Share Posted February 11 Finally got around to attaching the visor stock I printed a little while ago. It allows you to get down on the sights even wearing a Warq helmet. Egon_247, Enid_Puceflange and DanBow 3 Link to comment Share on other sites More sharing options...
Egon_247 Posted February 11 Share Posted February 11 Oh. Oh dear. For years i've had a thing for the Welrod. You know, the sneaky bastard WW2 assassins' gun. The boy got a creality for Christmas and has been getting to grips with it and i've just discovered that a cheap n nasty springer can be fitted into a 3d printed shell for a springy welrod....has to be my next project. On top of the other 30,000 jobs i have to do. DanBow, BigAl and gavinkempsell 3 Link to comment Share on other sites More sharing options...
DanBow Posted February 11 Share Posted February 11 1 minute ago, Egon_247 said: Oh. Oh dear. For years i've had a thing for the Welrod. You know, the sneaky bastard WW2 assassins' gun. The boy got a creality for Christmas and has been getting to grips with it and i've just discovered that a cheap n nasty springer can be fitted into a 3d printed shell for a springy welrod....has to be my next project. On top of the other 30,000 jobs i have to do. Definitely needa full build thread of its own. 😁 Egon_247 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted February 11 Share Posted February 11 2 minutes ago, DanBow said: Definitely needa full build thread of its own. 😁 I was hoping there was one for the aap01 that ive fired ten round through and didnt like it. GBB welrod mmmmmmmmmmmmmmmmmmmmmmmmmm. oh. bugger.... DanBow and EDcase 1 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 14 Share Posted February 14 (edited) Fully working and assembled barring a few bolts, outer barrel and slide release. Lovely and snappy. Looks a bit blank at the mo but by the time I have the sliding stock done it should look a little less barren Edited February 14 by HuttArmouries DanBow, gavinkempsell and Egon_247 2 1 Link to comment Share on other sites More sharing options...
Popular Post HuttArmouries Posted February 14 Popular Post Share Posted February 14 Since the bolt is plastic and weighs basically nothing this is the result. Shooting around 340fps with the longer barrel. This is on a we tech glock 19 mag. also added a magnet to keep the charging handle forward. MOV_3522.mp4 Tackle, DanBow, Scythian and 2 others 3 2 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 (edited) So i recently picked up a tokyo marui type 89 gbbr and I love it but ive seen multiple people have the nozzles eat themselves using green gas and heavy bbs and even some nozzle issues in japan with the correct gas. Given that spare nozzles for it are basically unavailable and I dont like running guns I cant get spares for ive started modeling spare nozzles for it. first test is printing now. It will no doubt require tollerancing and tweaking before it works but its a good start. And yes I did forget to put the slope on the very tip of it for feeding bbs XD. Ill put it in with a file for this version and fix it for later tests Edited February 23 by HuttArmouries Scythian and EDcase 2 Link to comment Share on other sites More sharing options...
EDcase Posted February 23 Share Posted February 23 (edited) Impressive modelling. What material do you use? Have you tried vapour or dipping for smoothing parts? Edited February 23 by EDcase Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 (edited) 3 minutes ago, EDcase said: Impressive modelling. What will you make it with and what material? Ill be making the test versions in pla until I have all the sizes right and then im going to experiment with pla+ and petg for the final parts. For my personal use I am happy to change parts every now and again so if it lasts a couple of skirmish days im happy. I might start selling them however in the distant future so I need to be sure they will survive for a good long time on greengas. Not sure how many people have these guns. Edited February 23 by HuttArmouries EDcase 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 1 hour ago, EDcase said: Impressive modelling. What material do you use? Have you tried vapour or dipping for smoothing parts? Didnt see the bit about vapour dipping. Not tried it yet but not yet had a print that wasnt clean enough to work as is so far. Link to comment Share on other sites More sharing options...
EDcase Posted February 23 Share Posted February 23 (edited) Sorry I wasn't clear. Its vapour smoothing OR dipping. The problem with vapour is getting even coverage (as the vapour is heavier than air and settles) and knowing when to stop. Apparently dipping directly in Isopropyl?/acetone is a method that can result in more even smoothing but does need quite a lot in a tub. (Can be reused for this purpose) Can obviously be repeated to smooth more. Edited February 23 by EDcase Egon_247 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 1 hour ago, EDcase said: Sorry I wasn't clear. Its vapour smoothing OR dipping. The problem with vapour is getting even coverage (as the vapour is heavier than air and settles) and knowing when to stop. Apparently dipping directly in Isopropyl?/acetone is a method that can result in more even smoothing but does need quite a lot in a tub. (Can be reused for this purpose) Can obviously be repeated to smooth more. Ah ok. yeah I have seen that done but generally when im making mechanical parts the end measurements would be a little too.... random? I guess if I did that. Like im not sure how repeatable it would be to .1 of a mm For aesthetic parts sure. Link to comment Share on other sites More sharing options...
EDcase Posted February 23 Share Posted February 23 Yeah that's true. I guess you don't want to round off precision corners 😉 What about UV cured resin for added strength and smoothness to the nozzle? Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 17 minutes ago, EDcase said: Yeah that's true. I guess you don't want to round off precision corners 😉 What about UV cured resin for added strength and smoothness to the nozzle? Uv resin tends to be quite brittle and not very impact resistant. It would also add significantly to the size of the part and again mess up the tolerances. Besides apart from a cuple of overhangs the fdm prints Im getting are more than smooth enough for the intended purpose EDcase 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 23 Share Posted February 23 (edited) Externally more or less done barring actually testing it. internal measurements are a bit off Edited February 23 by HuttArmouries gavinkempsell, EDcase, Enid_Puceflange and 1 other 3 1 Link to comment Share on other sites More sharing options...
HuttArmouries Posted February 24 Share Posted February 24 I forgot to show it in the vid but yes it does lock open on empty. I was just holding the bolt release for the demo 2024-02-24 00-51-37.mp4 Egon_247 and DanBow 1 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted February 24 Share Posted February 24 Just bought "fulcrum"s cap gun powered grenade. The boy is on it as I'm at work (AT work, not doing a lot, should have brought a broken AEG with me!) So hopefully it'll be printed by the time I get home. 👍😁 Link to comment Share on other sites More sharing options...
Darkmikey22 Posted February 25 Share Posted February 25 Had this printed for me. But the correct simrad rail for the British L115A3 sniper rifle. Spent ages smoothing it down, as was made from mfj. Then painted it to look metal. gavinkempsell, Enid_Puceflange and DanBow 1 2 Link to comment Share on other sites More sharing options...
Egon_247 Posted February 26 Share Posted February 26 14 hours ago, Darkmikey22 said: Had this printed for me. But the correct simrad rail for the British L115A3 sniper rifle. Spent ages smoothing it down, as was made from mfj. Then painted it to look metal. What goes on that then? Link to comment Share on other sites More sharing options...
Darkmikey22 Posted February 26 Share Posted February 26 9 hours ago, Egon_247 said: What goes on that then? Night vision scope DanBow, Egon_247 and GiantKiwi 2 1 Link to comment Share on other sites More sharing options...
Egon_247 Posted February 26 Share Posted February 26 nomnomnom thats sexyyyyyyyyy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now