Jump to content
CaptainDumbass

Best Gun/ Build for under £1000 (NOT PTW'S!!!!)

Recommended Posts

First off, this is NOT a thread asking for advice on a new gun i want.

I would just like to hear everyone's opinions on what you personally believe to be the best AEG, HPA or GBBR for around the price of £1000. Whether its out of the box or built from scratch. As long as they are not PTW/CTW/DTW's.

 

 

Share this post


Link to post
Share on other sites

TM SOPMOD, prometheus internal bits (gears, spring guide, piston, piston head, cylinder head), eagle 6 spring, BTC Spectre MOSFET, firefly hop rubber and nub.

 

Put a decent battery (11.1v, high discharge rate) in that and it'll batter anything else you can get for the money, real sword guns included.

 

Depends entirely on the quality of the installation of course, if you just wedge the bits in without properly shimming, correcting AOE on the piston etc it'll be a bag of shit.

Share this post


Link to post
Share on other sites

Personally, in my opinion? There are much better things to spend a grand on than an airsoft gun, especially when you consider that you can buy various very good aegs for a £600 budget.

Share this post


Link to post
Share on other sites

get a TM recoil shock and then call it quits.. spend the rest of the £400 in airsoft stuff if you like.. or just do something else with it!

Share this post


Link to post
Share on other sites

Suppose if my £1,000 gun goes tits up on me then I would have to switch to my £750 pistol then

 

jeez - can never see me spending much more than half that on just one gun myself unless I win

lottery - maybe PolarStar but I'll bet some Arab Prince kid has a 20k bling'd out mofo gun

as well as his own SWAT team of bodygaurds with REAL firearms on them follwing him around

(yeah not wise to light that kid up if he ain't taking his hits me thinks)

 

soz to derail thread & pi$$ off anybody

Share this post


Link to post
Share on other sites

Polarstar as previously stated. Only problem is some sites ban them as the fps is adjustable :/

 

I'm with Monkey though - no way would I spend a grand on a single rifle.

Share this post


Link to post
Share on other sites

Like i stated, i dont want to buy a gun and definitely not in that price range, i was just curious what people would get if they had that sort of money!

Share this post


Link to post
Share on other sites

To be honest I wouldn't go near a polar star, I've thought about them and considered it a couple of times but the gas tank and stuff would get on my tits, I think the performance and stuff is impressive but just a bit of a step backwards.

Share this post


Link to post
Share on other sites

I'd like to own a Polarstar for a short while to see what the fuss is all about....

 

Then knock up some crude DIY system of my own fitted to JBBG for a laugh

Yup I reckon it should take too much to knock up and rip piston/spring out

keep most of old gearbox - tappet plate etc for loading bb's - delay added

 

Already spoke to a guy who makes pcb's n stuff I buy from, what is required

is a basic adjustable pattern controller to controller the burst and rate of fire

all in milliseconds - probably could knock a crude one up using a picaxe chip

and use npn mosfets like I've done in past to activate solenoid valves....

Mac Solenoid valves like used in some paintball gun upgrades

heck even rip a paintball gun apart and convert - not rocket science

 

But - to me it isn't real airsoft with the marvelous bit of engineering like in

the regular gearbox's n stuff creating the force to propel the bb,

All those gears/springs that just miss each other - an amazing invention

ok not nuclear fusion but clever stuff all the same

 

Polarstar on reg skirmish - nah be like going out on a football pitch for a little

kick about and finding out German World Cup team is your opponents ffs

 

I like it the way it is - I struggle to stay alive atm let alone get raped by other team

running with bling'd out Polarstar's - avoid Edgware Road Skirmishing then

Share this post


Link to post
Share on other sites

I'd like to own a Polarstar for a short while to see what the fuss is all about....

 

Then knock up some crude DIY system of my own fitted to JBBG for a laugh

Yup I reckon it should take too much to knock up and rip piston/spring out

keep most of old gearbox - tappet plate etc for loading bb's - delay added

 

Already spoke to a guy who makes pcb's n stuff I buy from, what is required

is a basic adjustable pattern controller to controller the burst and rate of fire

all in milliseconds - probably could knock a crude one up using a picaxe chip

and use npn mosfets like I've done in past to activate solenoid valves....

Mac Solenoid valves like used in some paintball gun upgrades

heck even rip a paintball gun apart and convert - not rocket science

 

But - to me it isn't real airsoft with the marvelous bit of engineering like in

the regular gearbox's n stuff creating the force to propel the bb,

All those gears/springs that just miss each other - an amazing invention

ok not nuclear fusion but clever stuff all the same

 

Polarstar on reg skirmish - nah be like going out on a football pitch for a little

kick about and finding out German World Cup team is your opponents ffs

 

I like it the way it is - I struggle to stay alive atm let alone get raped by other team

running with bling'd out Polarstar's - avoid Edgware Road Skirmishing then

funny you say that. I had an ambition to import a polarstar for a while, but obviously I would have to get it two toned from evike. Turns out they do it in orange so I was thinking if it ever did happen would post it on the picture thread to see the replies. Don't think I want to do it now tbh, you gotta spend £250 on tank and regulator, + the actual thing... I think a nice GBBR would be better

Share this post


Link to post
Share on other sites

Wolverine SMP unit. Built mine complete £750. Works like a dream

Share this post


Link to post
Share on other sites

G&P WOC with G&P Silver Steel Bolt, Steel TCG inc uprated 150% springs, well under the budget. Could throw in a few Prowin V2's to make it that little bit sweeter.

Share this post


Link to post
Share on other sites

Shoot and Scoot Vickers:

p-592-vickers-01-600x400.jpg

£775 okay the tripod takes it over budget at £300, but only just. If you can find a team to run a machine gun and cart it around, why would you not want a Vickers!

Share this post


Link to post
Share on other sites

Shoot and Scoot Vickers:

p-592-vickers-01-600x400.jpg

£775 okay the tripod takes it over budget at £300, but only just. If you can find a team to run a machine gun and cart it around, why would you not want a Vickers!

 

Because I'd rather not get a hernia :P

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...