Esoterick

Three guys were wearing that at Longmoor last time I went(could be one of them in the pic) actually worked surprisingly well at concealing them, when combined with staying low.

I'm charging a 7.4v 2200 mAh LiPo using an Accucel 6. It's set on balance at 2 Amps and using 2 cell(7.4). However when charging it the cell voltages were showing as ~4v after 5 minutes or so. Is this ok/normal?

I kinda wish I had done this with my HK416, you can't see it in the picture I put up in the gun thread but there's a reasonable gouge out of my stock from my MS3.

You can also get ones that clamp over the buffer tube but i've heard mixed things about them. http://www.fire-support.co.uk/product/freedom-art-swivel-ring-for-stock-pipe-fit-sopmod-m4-

Set of Draper Torx screwdrivers, £5 posted

The problem with the rule all sites i've played at have about not touching other player's grenades is that throwing a grenade frequently involves blindly popping it around the corner. In other words it is often very hard to tell who threw it back, so it would the same as trying to report someone for non hit taking when you can't positively ID them. Regardless it is a fairly rare occurrence in my experience, fortunately I do like the look of these revolver style grenades though and M_P's idea sounds like a decent way of stopping them being used against you. When I get one I may just risk having someone be a nob to get the true benefit out of a multi bang grenade.

Most of the dialogue in Battlefield 4, primarily because of the really excessive swearing.

Welcome to the forum.

I couldn't see a thread for this so thought i'd make one. Used these chaps before as their batteries are a decent price and you can normally choose between tamiya and deans connectors. I just gave them a call to figure out the cable I needed for my charger and after sitting on hold for a minute or so the chap I got through to talked me through finding the right cable on their website which I thought was a nice touch.

Ordered a sling and bipod early hours of saturday morning, arrived today and postage was free. I'd definitely buy from them again.

Pentagon softshell jacket, needed a new jacket and it came with a free hat!

The Motorola's are PMR446 and tend to be a few quid more than something like the Baofeng UV-5R. Build quality on the Motorolas is marginally better in my opinion as I own both.

My little collection

I can't say I've tried we just got the multipack that comes with chargers, only downside is there are in banks of 2 so out of 4 radios we have 2 chargers if that makes sense.

Rail mount Bipod and Padded 2 point sling. Nearly finished buying stuff for a few weeks after the Huey's order....

I use the Motorola T60s with the 2 guys I regularly play with and they work really well. Headset should be fine too, one of my mates uses more or less the same and I've got something along those lines on order.

I can't say I do, why is he a Caramac fan?

I'd be looking to clamp it on whatever the bottom barrel is called not the actual barrel. You reckon it could still be an issue? I was mainly thinking about the clamp clearing the gap between the two to be honest. Failing that I will just get rail mount version.

Cheers, I've changed the pic to more accurately reflect what my gun looks like(minus the RAS) - I will try one of the clamp type bipod mounts.

I've just bought a G&P M63A1 RAS version. The only issue I have is I could do with a bipod and have no idea what the best option is. The two main contenders seem to be: A rail mount which shouldn't be an issue fitting wise, but may, at least in my head sit a bit too close to the centre of the gun to pivot cleanly without overbalancing or A barrel mount although there seems to be a few variants kicking about, I am also not sure if it will have enough clearance to mount like in this picture Can anyone recommend a decent solution for me to use? I'm preferably looking for something that won't block the rear half of the RAS when folded so the gun can still be held comfortably.

Tan guns always remind me of Caramac.

Kinda, the chord is way too long. I used to tuck mine between the back of the pouches and the plate carrier but it doesn't really stay put. I ended up cutting mine short with a bit of room to expand them out then melting the cut end with a lighter to seal off the frayed strands. I'd recommend you confirm they hold your mags first if you are going to do this, wouldn't be ideal to need the extra elastic you have cut away Edit: I did tie off the ends after cutting the elastic shorter then melted and pinched the end. Think it looks tidier and means the toggle will get blocked if it does try and slide down.

The general consensus tends to be that camo doesn't work in airsoft games(although I disagree) MTP is probably your best bet as it's designed for a range of terrain.

You might know this so this is more for other people's reference but Matt at Huey's is a top guy. He's ordering a pair of medium/long multicam tropic trousers for me as they were out of stock. Might help some other people if they want stuff from there that shows as out of stuck.