Lozart

Try Hammerite for the silver. Should be able to get it from halfords or homebase.

What gun?

If you're doing it for camouflage, krylon is your friend.

Why specifically rustoleum? Hammerite is basically the same.

Cool, thanks for that, I'll give it a try when the new piston etc is in.

Something that has been making me wonder - the Dytac receiver seems to be a bit tight fitting onto the TM gearbox. There is always a slight gap at the back where the upper meets the lower - is it likely that this is causing enough of a misalignment between the nozzle and the hop rubber to cause the BBs to get jammed? The original TM (plastic) receiver used the rear pin to lock down the upper, whereas the Dytac merely has a lip at the rear of the upper that fits under the rim of the upper.

Yeah.......I knew

It means the charger will stop when the battery is fully charged. As long as the battery is of a suitable type then yes, should work fine.

Could be a bit unwieldy with the wheels bolted on but yeah.

...this http://www.amazon.co.uk/gp/product/B0050RGSRW/ref=s9_simh_gw_p200_d0_i4?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=07B7SKVBE2X8N3ENZYV2&pf_rd_t=101&pf_rd_p=455344027&pf_rd_i=468294 is freely available through Amazon. What the actual fudge is that all about?

Just FYI - I could do that for you if you wanted....being a custom painter an' all.

Dude, everyone knows that all the worlds elite paint their guns yellow now.

My bad.

Personally, I'd get the G&G and use a 7.4v LiPo in it. IF the original MOSFET goes pop then change it for something better (like a Gate Nano).

Something I've always wondered - why is Dyslexia so hard to spell? Just seems cruel and unusual to me!

I think the statement PAS have made regarding the G&G mosfet is a bit of arse covering in the light of some failures in guns using 11.1v LiPos. +1 on the NanoAB Mosfet though, I have one in my M4 with a 7.4v LiPo and (when it's working) it's fuggin' great!

He had the guns out showing them to a support worker who expressed concerns about him taking them in to the college, Police were informed and they picked him up after seeing him on CCTV going to said college. He was cleared of the knife related offensive weapons charge but the only other criminal offence mentioned was modifying the guns by spraying them black (which would suggest that he didn't have a defence against the VCRA) There would have been no need to get ARU involved as they already knew they weren't real guns. Bit of a non-story that seems to have been blown a bit out of proportion in my opinion.

So true. Even WITH the Elcan sight and EGLM it still looks tiny on him!

Can you measure the diameter of the internal thread on your gun? If it's 11mm internal CW threaded then you can use one of these: http://www.ebay.com/itm/11to-14mm-Barrel-Adaptor-for-WE-Hi-capa-G17-G18C-G23-G25-G27-G34-G35-Airsoft-GBB-/191010433444?pt=UK_Sporting_Goods_Paintballing&hash=item2c791be9a4 which are usually for pistols but should do the job. Again, check the diameter of the thread first!

The article doesn't specifically state what he was charged with other than this bit: Which would suggest he was charged with unlawful possession of an offensive weapon (or similar). The point is that he wasn't in court for the guns but somehow managed to get himself fined for them. The only way that could have happened as far as I am aware was that he must have been charged with modifying the guns which would only have been an offence if he had no defence against the VCRA. The main thing he seems to actually be guilty of is being a dick by waving his guns about in public, which going on the fine levied on him he has pretty much got away with.

I have a SCAR-L and it's great. As above though if you want a good gun that you can buy mags and pouches for easily go for the L, if you want the look and US SOCOM appeal, get the H. Black Death has a black SCAR H TM Recoil and it looks the absolute dogs danglies. Check out the photos from the field thread to see what I mean!

+1 for the Element scout copies, although I have had some issues with the plug on the back getting a bit flaky. I also very highly rate the Nextorch WL10 which I have on my pistol. That thing will melt concrete at 100 paces!

When I was at peak fitness (a loooong time ago) I used to do three 1 hour cycling sessions on the road and then a good 4 hour freeride at the weekend. Worth a try. Your MTB should be fine for a bit of road riding but of you have particularly knobbly tyres you might want to try some slicks/lower profile tyres.

Seems it's mostly down to running them on 11.1v LiPos. The suggestion is that the higher gauge wiring allows more current to flow than the MOSFET can handle. PAS actually state in the blurb under the Gen 3 guns that you should only use them with 7.4v LiPo batteries and that the better wiring and MOSFET negates the advantages you'd get from an 11.1.