THE FNG

I started a using a gopro and never looked back. At first it was for my youtube channel.and being able to show friends ds and family what it is like and what I get up to. Nowadays, I havent uploaded a video for a few years due to not having the time to sift through all of the footage and edit it all. A quick tip for sifting; switch off the camera when you know there is little or no chance of engagements. I also use a media editor that shows the sound as a visual track so I can see the moments where there is a lot of noise. I do, however, use them for my own protection. I had an incident once where I shot somebody on a flight of stairs from a sneaky and concealed location where the angles were in my favour. The person I shot was adamant that I blind fired them. He made a big deal about it....until he noticed the gopro and then decided that he must have not seen me. I offered footage to the Marshall's but luckily they had seen it all and confirmed no blind fire. I have also caught other instances of cheating and unfair play. I almost caught someone breaking onto our site once but batteries had ran out.

This. About 7 or 8 years ago I dropped a TM TN57 mag in the woodland bit of anzio camp in leek. Not even a woodland site ry but there is some bushes and foliage. I saw it bounce off a mound of dirt and fly in to the hedgerow. Fast forward 2 years and I heard a Marshall say he found a large gbb mag in the hedges. I asked him if it had my initials and a number on it and low and behold, it was my mag! Couldn't beleive my luck. Over time the gas had leaked and it was very muddy but after a little clean up, I got it working again.

Really interested in how this turns out

+1 for TM NGRS 416. I'm hoping to use mine next month for my first skirm in about 3 years

Hi all, I was going through some of my kit the other day as I am due to have my first game in over 2 years in September. I tried test firing and zreo-ing in a few and I had a few issues. They are minor issues and it seemed a bit wasteful to make several topics, so here we are. King Arms P90 - mags wouldn't feed. I have a high cap and a mid cap mag and neither would feed, despite both feeding flawlessly a few months ago. I have made no alterations at all to the gun. I know P90 mags can be quite temperamental; are there are tips or tricks for P90 mags? I'm honestly not sure what brand the mags are, they came with the gun as a package when I bought it and the buyer wasn't sure of the brand. TM AUG High Cycle - The gun would shoot ok, but for some reason, the first trigger pull would not fire the round, but the bb would then roll out of the end of the barrel when the gun was pointed downward! All shots after the first would fire no problem. IF the gun mag was taken out and then reinserted, the same would happen, first round wouldn't exit the barrel but would then drop out when the gun pointed downwards. Every shot after would just roll out. I imagine it could be the way I have put the barrel back together? I took out the stock barrel and swapped it for a 340mm barrel to boost the fps without having to alter the gearbox (It worked; bumped the stock 270 fps to around 310-320). I did take the hop tension off but it didn't prevent it happening again. G&P LMT M4 - The motor on this has an awful screech. Its doesn't appear to be the height as I have adjusted the height and done a long trial and error test but to no avail. Any recommendations for a good high torque motor that won't break the bank?

😂🤣😂🤣😂🤣😂🤣 Holy shit that caught me off guard! I know they're good but I'm not a fan of the arp9 and the 9mm carbiney type things. Like big stew said, get an mp5 or a similar smg.

Hi all, Looking for some advice with fixing my classic army ump. I need some help with picking the right parts to swap out. Firstly the piston stripped so I need a new piston. I will also need a new piston head and o ring as the stock one got damaged and are no longer useable. The gears, AR latch and motor are ok. I think the tappet plate and cylinder are in order too. My question is, what do I need for a stock/normal-ish build? I'm not seeking to turn it into some 900000 rps monster; just something with a respectable trigger response which it wasnt far off when fully stock and working. At the moment, all parts are stock. I was hoping to use parts available at ak2m4 if possible as I will be putting an order in soon for some other bits for another project. Edit: whilst I'm browsing ak2m4, can anyone point me in the right direction for some trigger contacts for a g&p sr15?

I've had mixed results. Over the past year or so, I've put up wanted ads for: P90 Ak74u (These 2 had zero hits and I ended up getting what I wanted by messaging other people who had ads up) M4/mk18 - had a few hits but none that quite met my specs or price ranges. Ended up getting one by messaging someone who had an ad. WE G33 - I got approached by someone who saw my m4 ad for sale and we did a part ex. I also put ads for an l86 and acr for sale. Both got a sale/trade fairly quickly.

Hi all, I recently acquired a Cyma AK74u and I wanted to run an optic. I bought a cheap AK side mount for optics which fit but after taking it off and putting back on a few times to get to the battery compartment, it actually broke. The top of the bolt/screw thing came loose from the rest of the bolt, meaning it will slide into place but cant be locked or secured. I'm looking for your experiences with side mounts and any recommendations for any particular products that have lasted being taken on and off and then test of time. For info, I bought this: https://www.amazon.co.uk/gp/aw/d/B07V827WP3?psc=1&ref=ppx_pop_mob_b_asin_title

Just googled it; that's the peq box I'm referring to thanks. Just need to source a red dot for it now

Hi all, Bit of a random one; I was testing my peq boxes the other day to make sure they still work and I noticed in one of my peq boxes, on the top, are 2 screw holes and 2 bumps in front of them. I thought to myself how cool it would be if an rmr or dr/micro red dot would fit...on there. I tried putting on the rmr but the holes were the wrong width. I tried the red dot from the top of my elcan spectre....and bloody hell it fit!! The screw holes and 2 bumps line up perfectly! I'm trying to find out where I can get a mini red dot that isn't switch operated. The one from the spectre has a little sensor which detects sunlight and switches off when you put the cover on. I need to find where I can get one of these as the switch operated on one wont work as there is nothing to activate it when mounted to the peq as the switch is separated from the battery. Anyone know what I'm on about? I'm guessing loads of people know about this but I feel like ive found a tactical goldmine!!!

Yea it will be a case of trial and error. Might be a pain but try with 1 or 2 strips first and see how you go and add more until you get your desired angle. Just make sure your scope rings are nice and tight when you reach your desired height so it cant all move around and throw off your zero.

If you've got scope rings, the old trick was to put something like photo film or thin plastic sheets inside the scope ring where the scope sits. If you want your sight to look higher, try a piece under your front scope mount (I cut up a strip from a plastic wallet that you put paper in when using folders).

Yea that's a drawback. If you can locate some UMC mags they will do the job; they're just super rate.

Iirc g&g ump are only compatible with g&g and classic army mags. I had the classic army UMP which is a clone of the g&g as my first aeg, loved it to bits. Get the g&g qd suppressor for the ump, makes it super quiet! Only criticism was the stock is a bit big and awkward but other than that, a very solid aeg.

Looking for a value please for my KAC PDW gbb by WE. Bought from a mate about 3 years ago as a project but a wedding, house move and baby have messed that up for me! Gutted to get rid but Gbbs arent my forte and I dont have the time or funds nowadays. It is stock apart from an npas installed by a prev owner. Comes as seen and with 2 working stanag style mags (see below) and 1 spare/non working mag that has been completely messed up by the prev owner. Issues: It will come with 2 working mags. One of them chronod at 320 and the other mag at 370!! I think it's due to a slightly worn lip on one of the mags. It appears that the npas was adjusted by the prev owner on the slightly worn mag. I might have the npas key somewhere but I will have to look for it. It is a little sluggish on full auto but I'm not sure if this is a tuning requirement or a restriction of the system (apparently some threads on google say the gbb system was crammed into the pdw and it suffers slightly as a result). Plus some cosmetic wear and tear as pictured.

Feel quite sorry for the police. Damned if they do, damned if they dont. Arguments for all outcomes and "they should have done this instead" can be applied to every scenario. For example; say the cop shot the prick. "Oh he should have used de-escalation tactics and non lethal force" or "excessive violence, just like the Americans, ACAB, kill the bill etc" Say he doesnt shoot, like this scenario: "He hesitated, he shouldn't be in the role, he cant keep the streets safe etc" or "what's the point in cops having firearms if they arent going to use them" etc. There are SOOOO many variables that joe public dont know about and the media typically only push thier own dogmatic narrative despite having less than half the facts....and the public lap it up and join in. Hats off to that cop; whether he had intel or prior knowledge of the weapon or not, he still looked down the barrel of that firearm and didnt know 100% if it was a lethal or if the prick would use it. Balls of fucking steel.

If you're wanting an fps boost, I'd suggest the spring guide for a slight fps boost and a tightbore. I've been experimenting recently with Tbb's: I have a tm aug high cycle and didnt want to destroy the tm magic but wanted an fps boost from it's out of the box 265-270. It came with a stock barrel of 260mm. I swapped for a zci 340mm and got a 30fps boost; now chrome's 298-302. If the mk18 has a 275mm standard barrel, you could potentially upgrade to similar barrel length based on the piston, just dont go over 350mm or you will need a different ported cylinder and that would mean gearbox work. I put a Prommy 363mm in my stock tm scar H, expecting a 20-30 fps boost and got no change at all, I beleive that's because the inner is too long for the piston and so there is a drag effect on the bbs and it negates the gained fps from the longer barrel. In theory, new barrel and the spring guide could give you up to "not guaranteed" 20-30 fps boost that shouldn't add any stress on the gearbox. Please someone correct me if I'm wrong! Tl;dr - I might not understand airsoft physics so ignore me!

Carpet over foam every day to stop rounds going through. The foam will start breaking away and rounds may go through on parts that have been hit multiple times.

Sierra's alright, been a while since I've been; Very dark in places and very tight. I'm gutted that Squad assault in Burslem closed; was at the old pottery place on Bournes Bank near the snooker/pool place. Theres a paintball site in Madeley as well that sometimes has airsoft events (unreal paintball maybe) that's good too.

Evening and welcome. Whereabouts in Staffs are you? I'm stoke(ish) area and would recommend trying First and Only's Anzio camp site in Leek, awesome site. You wont be able to spray your bright colours black until you have a Ukara or equivalent defence, or you will be manufacturing a RIF, against the vcra. It's only 3 games for Ukara, they will fly past!

Non evasive for a spring guide? Do you not have to open the gearbox for a spring guide?

@rocketdogbert One for you rocket...

I've seen some interesting results with inner barrels. First time I saw fps change was with a classic army ump.45; I swapped the stock 200mm inner barrel for a 363 6.03 madbull barrel. It went from 325 fps to 375! 50 fps increase. My scar H went up 5 or 10 with a barrel length Increase up to 363mm with the prommy/laylax. Aug has had a 30 fps increase with a 100mm+ increase. I put the same madbull 363mm in a cyma p90 and that went up around 30 fps+ iirc.