Adolf Hamster

Not in all cases, some setups can have a dramatic drop in power when the hop is almost/completely off, so dramatic the bb can struggle to even make it down the barrel. I've never quite figured exactly how that works but i've seen it often enough that i got into the habit of setting hops at least mid-way when bench testing. Hence why it bugs me when sites do the whole "chrono with the hop off" thing because its basically asking for false readings.

If it aint that then the only other explanation is all but 1 of those radios are dead, because i have no idea why you'd want more than 1 otherwise......

Also why are there as many radios as there are spare mags?

Ahh yes, fully upgraded..... With what? By whom? And to what benefit?

Even better when they shout "freindly fire" and play on, needless to say continuing to fire on them rarely ends amicably.

I've used macarons with pdi, cant say had any real issues.

Is that a front sight block complete with a cut stub of outer barrel i see pictured?

Dont think i ever managed to push it north of 30, but then i was very much tuning for accuracy and mainly running in semiauto. It's worth noting that the auto rof doesn't really define the snappyness in semi auto.

I have in my memory the f2 has an 11mm stroke of the nozzle, so slightly longer doesnt affect it too much. I ran the 800c and cant say i noticed any issues, can't be turned off independant of setting the pressure but otherwise worked well. Certainly kept the jack fed. The f2 is a bit trickier to get to be real speedy without sacrificing accuracy, it'll handle mid 20's fine but an a10 it isn't.

Definately required, very similar setup to what i was running (247 in the m4 and similar in the e&l) I had no issues running the m4 nozzle in the e&l, so you might be fine.

Mans is still a fan of the f2 as a solid all rounder, it'll take some tuning to get the best out of it but it can provide excellent consistency and has a nice range of nozzle/triggerboard combos should you wish to give it a different home. If you're running it at low energy then a low flow poppet is a worthwhile investment.

I'd lean towards the warhead, the ramp up speed makes for a better percieved snappyness. Only downside (although afaik they might have alleviated it on their newer motors) is the contacts on the warhead are much more delicate, so a lot more care needs to be taken on the install rather than stuffing wires in willy nilly.

gotta love it, no detail of exactly what was replaced, why it was replaced, what the replacement part is, or even any claim (let alone guarantee) that the replacement part netted any improvement in performance over the original.

Out of context it's saying they have a good relationship with rs vortex so won't sell clones of vortex products?

How dissappointed would you be to buy that, show up at the next game thinking you were gonna stand out with your limited edition faithful replica only to realise most people arent going to notice just another green m4.......

makes it a 2 in 3 odds though, guess the 1 in 3 are hoping folk are ready to gamble. and it's not as if a pew that appears to be functioning reasonably well on the surface can't still be a horror show once you get under the hood.

tis a tricky balance. on the one hand a well executed sneaky play can be equal parts hilarious and effective, but on the other hand, if we can't trust someone is out when everything about their demeanour is saying so, then that's just gonna invite people to be sure, which whilst fair enough if their hands aren't up is regardless going to illicit salt from those who are genuinely out and just have their hand down. yes you could argue that not having a hand up is fair game, but even outside of fatigue if you've got some tricky ground/obstacle to maneuver around/over you might need both hands to balance.

Site dependant, some places the play area can be within the effecitive pew range, but generally yes. Sites will have their own rule, but the one guaranteed thing to think when this happens is "how do you know its freindly fire?" Generally a lot of sites say no, but as above you need to be sure it's a ricochet and not someone hitting you from an unexpected angle. You tap them with your dummy knife and hope they get the memo.

On the gate mosfets (warfet, merf, nano etc) the wiring isnt that bad if your handy with a soldering iron. Basically you wire the two contact wires (small black plug) to one set of contacts, then link those to the second set of contacts in paralell so either contact sets the mosfet off. Then the motor is just wired to a deans plug which plugs directly into the mosfet. I'd advise against anything with active braking bar the warfet, as without adjustable precocking the active brake functionality can screw with the function of the cutoff (which is bad enough in a conventional pew let alone one with a rube golberg trigger mechanism). Took me longer than i like to admit realising thats what was causing the endless semi lockups on me f2000

Well you might wanna reconsider, likely invalidate your warranty......

No end cap or retaining mechanism? Just dont point the gun down it'll be fine......

Same, but then the number of times i've chrono'd on the limit with .48's to be told my gun's shooting low because they're reading the fps and not the joule readout..... Not encountered that one much, although mostly because the sites hadn't evolved that far..... Tbf kinetic energy is (unless they've changed the curriculum) still taught in schools yet we still have sites that struggle to understand the difference between velocity and energy. Yeah i get not everyone's an engineer or even an enthusiast but as you say so much is documented, the conversion charts and calculators freely available on the internet and the majority of chronographs even do the conversion for you and that still aint enough. I can understand lower limits for energy at cqb sites. Whilst i don't personally subscribe to the idea of heavy weights being an issue when fired at lower energy i can understand that a cqb site limiting ammo weight as an expedient means of avoiding joule creep issues especially when the site environment (especially indoor close range) means that realistically there's no benefit to the heavies anyway. As long as on a per-site basis the rules for that site are well signposted, and enforced as advertised then it's up to folk showing up to prepare for that.

Sounds needlessly complicated. Limit in joules for regular/dmr/sniper, strip of tape converted to fps for common bb weights, chrono on the players game weight with a stash of speedloaders to verify suspect cases, follow up with in-game spot checks and most importantly actually enforce bans for infringement. A well dialled in hpa setup can be very consistent, emphasis on the well dialled in. Needless to say sub-par tuning can have an hpa being every big as inconsistent as an aeg. The issue comes with the phenomenon of joule creep, which also affects gbb guns (and some modified spring bolt actions when heavyweight pistons are involved) whereby the gun can chrono entirely legitimately on say .2g, but then with no other modification output more energy simply by switching to a heavier ammo (the fps will be lower but not by as much as the same switch in an aeg), hence my above caveat of chronographing on players game weight.

Loving the dedication to accuracy of the maxx hopup unit and custom made edgi barrel... And the dedication to ruining it by using an open bolt engine......

does it? because if they have a problem with hpa players then lowering the limits for those players will be as effective as a lower speed limit sign is at preventing speeding...... ahh, so you do understand that hpa in and of itself isn't the problem, it's the person operating it....... yes, i get how annoying it is to play somewhere with regular occurrences of players who are, one way or another, being assholes. but there's only 1 option available that you can do to fix it, and that's to move, either to a better site or if that's not an option move out of the hobby. because people will always be the worst kind of people and there ain't no changing that.