mintsauce5

the rule at the site i play at is that metal grenades have to be rolled knee height or lower and like you say not posted through windows or over barriers incase someones behind or under

the rule at the site i play at is that metal grenades have to be rolled knee height or lower and like you say not posted through windows or over barriers incase someones behind or under

the rule at the site i play at is that metal grenades have to be rolled knee height or lower and like you say not posted through windows or over barriers incase someones behind or under

Fireball squadron at bassets pole behind the npf paintball site , walk on first Saturday of the month is a great site

After being hit by a sniper from about 40 feet

It’s a good few years ago that one , did go to the walk in nhs at the time though just to get it checked out

After being hit by a sniper from about 40 feet

maybe you've tried this but you lever the opposite end as Lozart said and the pin goes flush
IMG_9234.MOV
IMG_9234.MOV
IMG_9234.MOV

I’ve got the Odin m12 , the evo mags can be loaded without an adapter easy enough just have to hold the magazine in place

Have a look at mr herosharks mesh offerings , I’ve got three sets now and swear by them and like thefull9 said , occasional bb has shattered but no damage caused 

how about these HSGI Replacement Bungee Kit Pack of 6 (tactical-kit.co.uk)

how about these HSGI Replacement Bungee Kit Pack of 6 (tactical-kit.co.uk)

how about these HSGI Replacement Bungee Kit Pack of 6 (tactical-kit.co.uk)

Hi , I'm in the Walsall area , myself and a couple of other lads play at Fireball squadron at bassetts pole most months the walk on day is the first Saturday of every month , theres's also stormforce between Rugeley and Lichfield and west mids airsoft which are great sites , you'd be welcome to tag along with us one of the weekends if you like , we are going to Fireball on the 7th of November but I think its fully booked now

Hi
    yeah just the standard one like this https://www.highspeedgear.com/hsgi/pistol-taco-11pt00.html  , i think one of them is a warrior assault systems one which is very similar https://www.uktactical.com/p-10552-warrior-single-quick-mag-for-9mm-pistol-coyote-tan.aspx

i use hsgi pistol taco's for my mk23 mags , haven't lost one yet just make sure the retension elastic is tight 

the FOB is a great site , well run , good games all the hire kit is done through www.sixmil.com good selection of hire kit , theres also fireball squadron at bassets pole near sutton coldfield

As said above, Eagle6 springs are specifically designed for the recoil gearbox, I'm pretty sure fire support just put in standard AEG springs... they work but they're not 100% correct, won't have any negative impact on durability but it does mean more lockups in semi auto when your batteries are getting a bit low.

Fire support as standard swap the marui gears out for SHS ones, it's not a bad thing by any means the SHS ones are really good and definitely will last longer than the marui ones, but, the marui ones will already last you for YEARS even with a slightly beefier spring so it's a bit of an unnecessary swap.

If you're fitting a prometheus 6.03 barrel too I'd go with an M95 spring rather than the M100, that's the setup I have in my M4 and it's given me 340fps on the button.
 
If you've not already had it done I'd also recommend a LiPo conversion and using 7.4v LiPo batteries, the marui quick change ones are rubbish and horrendously expensive.

The original one was cracked , had an old fde stock so used the hinge off that for the time being

Ok, so I am currently using .2g bbs. But I wanna get some further distance. Is it as simple as chucking in .25g bbs? done? thanks.

I've got a tm glock 18c AEP , great little pistol use it now as my main sidearm , I did have a we p228 gbb which was good fun though , now I'm on the look out for a g18c gbb just because I like glock not to replace the AEP you understand :-)

Some of you might have seen my thread on my M14, well, paints arrived, and before I go ahead and respray the two tone parts, just wanted to stop by and ask if anyone has any tips, this is the gun so you can see which parts need respraying http://www.justbbguns.co.uk/product/549/2-TONE-GUNS-PRO/462/PAINTED-AEG-RIFLES/3125/GG-M14-AEG-BLUE
 
Basically the barrel, top part and the stock cover. The barrel is metal, as is the stock, the top part is polymer, not sure if that makes any difference
 
Was going to go with masking taping the wood and metal parts around the sights, but just wanted to ask if there's a better way to go around spray painting?
 
Cheers in advance.

hey guys,
 
We are a new and upcoming Airsoft group based in Mid Wales (Llandrindod Wells) We have a 220 Acre site. Camping available from Friday evening to Sunday afternoon for weekend events toilets on site. we will have one day event as well. we have a Facebook page aswell, We are holding an event on 2nd February if your interested feel free to message either the page or myself (Lew Parsons) We are a new and upcoming Airsoft group based in Mid Wales (Llandrindod Wells) We have a 220 Acre site. Camping available from Friday evening to Sunday afternoon for weekend events toilets on site. we will have one day event as well.
site fee £15 members £20.00 non members walk on fee on site fps will be AEG,s 360/370 and snipers will 450, common sense to be used . freshly written scenario's , all airsofters welcome. Postcode for the site is LD1 6PG. Under 16 year olds will need Parental Consent in order to play. site has lots going for it , such as things like, a pine forest, bunkers , tunnel systems and a lot more. The terrain of this site varies from stone patrol paths to a stream running through the site. https://www.facebook.com/RedKiteAirsoft

i saw something similar, some guy didnt have a mag in his gun. and was wondering why he couldnt hit anyone

Hi guys, should have posted here first before an advice thread but here it is anyway.

Names Robbie, im 20, living in luton and working as an IT admin for a few years now.
I have always been interested in airsoft but have never had a way of getting to the sites, but that had changed now and i am so hyped to get my gear in and start my first game.

(if anyone knows much about decent budget shottys and could spare a few mins it would be much appreciated as im trying to decide on my 1st gun).

Cheers, looking forward to becoming an active member