Shizbazki

I live in London, North East side near Stratford.

Hahaha Yeah i did stretch the magazine spring which i think is used to push the little nubbin up for the bolt catch. The spring that attaches to the pin at the bottom the ZET mech seems to be ok, its under a lot of tension when i put the rod back in.

Well i'm at wits end, the buffer tube cap screw was fine. I can only think that when i do actually use the gun outdoor, the colder temps will cause the gas to lower its pressure so the bolt lock "should" work. I have a light weight bolt catch (spanner thingy) on the way so i'll keep you guys updated. Otherwise ill be using my GHK M4 Which does lock back.

Which spring? the buffer spring or the ZET spring at the bottom of the trigger mech?

The GHK buffer i used was the light buffer with a spring on the end, namely this one: http://fg-airsoft.com/en/buffers-and-related/392-lightweight-buffer-for-m4-.html I have just used Abbey Predator Gun Gas 144a and the bolt lock works perfectly every time. FPS is down from 350 ~360 to 300FPS

ASG Ultair Currently shooting in my room, around 18 to 20 C

Ok in testing this and having stripped the gun down several times now. I have tried: Cleaning and regreasing the trigger mech Tried both bolt catches (Stock and UAC) Tried both magazine catches (Stock and UAC) Tried pressing in and pulling out the mag with the mag locked in place Firing in semi and full auto though sometimes on full auto it locks back So far i am stumped as to why its not locking back Out of curiousity i also installed a stock GHK M4 buffer and spring. With the GHK spring and TM Buffer, no locking back With TM Spring and GHK buffer lock back worked every single time though it does feel like theres some metal to metal contact at the fullest pull on the BCG so its not an ideal fix as i suspect at some point there's going to be too much wear and tear on the BCG. I have cut the spring inside the TM Buffer to shorten its travel but this made no difference. I have ordered a light weight bolt catch and see if that plays any game, hopefully it arrives tomorrow.

I had a third party mag catch too, tried pressing up on the mag and then reinstalled the stock mag catch. No game. The buffer tube is about 2 threads turned out (2 top threads and 3 valley threads). Pressing the bolt release catch (on the bottom end) and firing a single shot does lock the bolt back which leads me to believe that the bolt catch is not rising up in time to catch the bolt.

Hmm the ZET plate (assuming you mean the large-ish silver spanner looking thing) seems to move quite freely in the gun.

Does anyone have any issues with their bolt lock not locking?? I'm currently using green gas (ASG Ultrair) and it never seems to lock back though racking it back manually does lock it back. I have tried unscrewing the buffer tube by one then two turns but no luck. I did have a UAC bolt lock lever on it for a bit but i even change back to the stock one and the issue still persists. Funny enough i have found out that when the mag is near empty and only spluttering, the bolt lock seems to work fine??? Any fixes?

Hi guys after a bit of advice. TLDR: Recommend me a RAS/RIS rail, about 9" long in Keymod or M-Lok, Picatinny only on upper rail Do i need a new barrel nut? Do i need something like the PTS spacer nut? such as this https://www.fire-support.co.uk/product/pts-adapter-ring-for-marui-m4-mws-gbb or even this: https://shop.jkarmy.com/parts/mws-zet-system/c-c-outer-barrel-nut-spacer-stainless-steel-for-marui-m4-ar-mws-gbb.html Also what is the TM profile? seeing M31.8 / P1.5 is that the threading? After buying a TM MWS second hand (maybe even third who knows) I have a few questions about it. As you can see it came with an already attached 3rd party manufacturer RIS/RAS rail, I have managed to identify it as a Dytac 7" SLR Rail. Whilst it is nice rail, it is only 7" long, that means that the previous owner/s have used a shorter outer barrel but kept the inner barrel the same meaning that the LANTAC flash hider has most of the inner barrel showing as you can see in the imaged below. I have purchased a 2" barrel extender to make up for this but now this means that too much barrel will be protruding out of the RIS/RAS rail. Also annoyingly this Rail does not fit it properly and in order to keep the RIS/RAS rail centred, previous owners have used bits of card as shims to hold it in place. Looking online it appears that i have to use an aftermarket barrel spacer in order to use aftermarket RAS/RIS rails, is this the case? There is already a barrel nut that seem to fit fine for the length of the rail. Also yeah i noticed the previous owner/s have omitted the gas return rod but for airsoft it has no purpose and it don't bother me too much. I have the original Outer Barrel, handguards etc. So from where i am, can i just get any RAS/RIS rail and fit to my gun. On that note can anyone recommend me a RAS/RIS rail, ideally a 9" long one that is either Keymod or M-Lok (no picatinny except for the top monolithic rail).

So who do i have to hold responsible for this?! @Wo1f I'm looking at you 🤔 TM MWS, got it second hand with the magpul parts and keymod rail I added the Gold bits so it goes with my SAI M4 HPA gun and bought one more mag. Recoil is great and i am tempted to sell my GHK M4 as IMO this does feel a bit better. No idea how well or accurate it shoots as i don't know what tampering the hop has had but im hoping the TM fairy dust is still there.

Nah Brownells have always covered me with Import and duties, never had to pay anything additional

Cheers mate, may my wallet say its prayers

So I may be in receipt of a TM MWS soon (can't wait) and plan to modify some of the external parts when it arrives. So i wanted to know if the following can be changed? Stock: I want to change the stock to a real steel Magpul MOE SL stock. Has anyone fitted one to their MWS? which did you need to use, the civilian or Mil-Spec size and was it a tight fit? Pistol grip: I want to also change this to a Magpul MOE pistol grip too, again was it a simple fit, does the MWS use only 1 bolt to hold the grip in place. If it did need a little modding what did you have to do? I plan to leave the rest of the internals stock as i find TM works best for me if i dont touch the innards especially the hop but what, if anything do you guys often change first?

Arrgh I should stop looking at this thread, really want a TM MWS RIF now despite already owning a GHK M4 Mod1 which i really love too.

Currently driving a BMW 330d GT M Sport X Drive

For those interested. The Ace1Arms right hand release catch is availible and instock at WGCShop. This mod allows you to release the mag with either hand, works really well i used to have one on my KWA Vector before i sold the whole gun with it. https://www.wgcshop.com/products?search_From=special&item=ace-1-arms-right-hand-magazine-release-for-kwa-kriss-gbb&search=special&rs=Available Again&catid=&cat=&view_choice=a

TL:DR is a 45 degree sear ok for M150 spring (500FPS)? Also name me a good bucking? So I have recently acquired an ARES WA2000 and while a lovely looking rifle its performance is a bit on the lacking side. Its FPS is about 380FPs on .20g BBs and whilst i know that FPS isnt the end all and be all i would like to up this to most of my sites max FPSs. As for range i cannot tell what its like but looking at the crap bucking put in their by ARES its probably going to be pants at best, i plane to change this anyways. So for those that dont know i have done so of my own research into this gun and found the following was compatible with VSR parts: Inner barrel measured to be 500mm in length, needs to be a bridged window barrel. Hop up bucking Cylinder head Cylinder Piston Piston Spring Spring guide Now i must point out that the trigger is a 45degree trigger, i read in various forums that the 45 degree trigger cannot be exchanged for a 90 degree one so i am stuck with 45 degree and it looks like the Ares one is made of the usual airosft pot metal zinc diecast material when i took it apart the last time. So my plan is to buy a full upgrade set Cylinder head, Cylinder, Piston, Piston Spring, M150 Spring and Spring guide. I am hoping the 45 degree sear can be swapped with a TM compatible steel one for great reliability but will it be ok for an M150 spring? Also what would you recommend as a good bucking, i have heard Maple leaf being thrown around amongst other brands.

I'd say its range was pretty pants compared to my G&G TR4-18 which i tweak the heck out of. I would only shoot around 50m but i think its cos i didn't bed the hop in properly and Green Gas is an inconsistent bastard in winter. I dont have it anymore, alas i sold it and kinda regret it but i never used it.

Dunno if i am still allowed to post here? The KWA Kriss Vector was the 3rd airsoft gun i ever owned and first GBBR. Got it second hand but didn't realise it was a former two tone one which had roughly been sprayed by its previous owner so had to strip it all down and re do it myself properly. I decided to go with the Bronze and black look and it turned out quite good IMO. Had 8 mags for it and a heck of a load of accessories (HPA taps in all). But in the end it sat unused for the best part of a year whilst my G&G TR4-18 was doing all the heavy pulling, also i think the hop was crap as i couldn't hit the side of a barn door Anyways here area few pics of it to reminisce.

They are on an excellent shop, not the same since Martin and Nathan left and i wish them the best but the rest of the staff are really good and helpful.

I've been a few times over the past few months and found them nothing but helpful on the whole, i recently bought a TM Glock 22 as i wanted a TM body to fit my GunsModify G34 Salient Arms slide, when i asked about it they were a bit apprehensive of trying to fit it on but did eventually, they were in awe of the slide i had especially at the price i got it at and confirmed that it was the GunsModify (read better than Ace1Arms) one i had. However at the time of the buying the Glock, the UKARA website decided to go down so he could not check my UKARA validation (which i had) and was umming and ahhing if he should just let me have it on a pinky promise not to use it in an armed robbery (lol) he tried calling my local site but they didn't pick up the phone, my only choice was to ask him to call another shop (AirsoftZone) as the staff their could confirm that i was a regular player which he did without issue. However my last order with them did go a bit tits up when i ordered a Magpul stock and they sent me the wrong model, i called them up and they apologised profusely, i returned it in original packing and they gave me the correct one with no quibbles and again apologised. I will be going back there as they do have some rare pieces and whilst their website isn't perfect and still rough around the edges its a far cry improvement over the crap they had before.

yeah haha I didnt spend much time there was only passing through but its a damn sight easier to navigate and filter stuff out you dont want rather than 153 pages of AEGs in stock and out of stock, past and present.