The 'What have you just bought' Thread

[Tank423]

WE Apache A3 and KWA USP 9, cheeky little H&K setup as I want to have a few games where I'm not sat at the back like a loser with my VSR and get my fat ass moving a bit more, need to set up my second belt to suit this load out but thankfully won't need a million pistol mag pouches as I won't be running 2 pistols with this. Or maybe I'll run a Mac with these 2 😂

[Codlips]

Just purchased Raven Evolution ORE Slayer, budget gun shoots like a laser and hits like a truck. Also Delta Armory Tempest 2 for DMR conversion and an M120 spring, Programming is a convoluted mess but the RIF is solid

Edited Sunday at 06:44 by Codlips
add pictures

[lokkers]

On 11/07/2025 at 12:00, The_Lord_Poncho said:

What's the suppressor?

 

It's a VFC OPS Inc

 

https://www.proactstore.com/products/vfc-vf9-ss-ops3rd-01

[PopRocket123]

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

[Lozart]

15 hours ago, PopRocket123 said:

Just got a set of G&P externals, probably going to cannibalise another G&P to build it out into an SPR style rifle. Not a huge fan of the texturing on the stock and grip but you get used to it. The lower markings are very 2010s cringe. What I was really after was the URX 3.1 handguard but it also came with the iconic KAC golf ball effect dimpled barrel which is a vibe. And a 3d printed suppressor which looks fine from a few steps back and is actually lighter than the metal flash hider

 

Very nice. I have a 3.1 on my SR25k, which I would love to point you to but it looks like the website where I got it has disappeared! www.honortask.com in case it comes up again.

[Anonymoose]

When you break two NGRSs in one day..

 

[Tank423]

1 hour ago, Anonymoose said:

When you break two NGRSs in one day..

 

 

But but your going to lose the magic TM pixie dust if you dare to open it.

 

We shall await the thread about neither working anymore 😂

[Anonymoose]

1 minute ago, Tank423 said:

 

But but your going to lose the magic TM pixie dust if you dare to open it.

 

I've already opened them both and let the dust out.

 

2 minutes ago, Tank423 said:

We shall await the thread about neither working anymore 😂

 

They already don't work, so no worse off. 😛

[Baser]

Been on the lookout for a gun to DMR and I came across this LCT G3. It’s a full size, mostly metal, big mag, big gun.  1.1m long and 5kg with an empty mag she’s a beast. 
 

Plan to get it looking right, bit of patina to make it feel its age, might see if I can find a set of the wooden stock/hand guard I've seen on my travels. Era correct 2 point sling and optic, maybe a big fat mock suppressor to add to the bigness? Need a couple of extra mags as well. 
 

When it’s looking right it’s going to a tech for a good service, not sure on the condition of the internals? Sounds a bit whiney, but does shoot straight, not sure if that’s a characteristic of this motor/gearbox combo? Will be rebuilt to be a semi only DMR, optical mosfet for trigger response, big spring for power and a good shim to get it running smooth.

 

Another very pretty gun to add to the collection.  
 

[pyromancer6]

11 minutes ago, Baser said:

Been on the lookout for a gun to DMR and I came across this LCT G3. It’s a full size, mostly metal, big mag, big gun.  1.1m long and 5kg with an empty mag she’s a beast. 
 

Plan to get it looking right, bit of patina to make it feel its age, might see if I can find a set of the wooden stock/hand guard I've seen on my travels. Era correct 2 point sling and optic, maybe a big fat mock suppressor to add to the bigness? Need a couple of extra mags as well. 
 

When it’s looking right it’s going to a tech for a good service, not sure on the condition of the internals? Sounds a bit whiney, but does shoot straight, not sure if that’s a characteristic of this motor/gearbox combo? Will be rebuilt to be a semi only DMR, optical mosfet for trigger response, big spring for power and a good shim to get it running smooth.

 

Another very pretty gun to add to the collection.  
 

LCT G3s are pretty notorious for a few things (the midcaps being one of them) but they make awesome pieces once sorted. Have fun lugging that sledgehammer around all day though!

Edited yesterday at 17:26 by pyromancer6

[Lyndication]

G3s are so damn cool, I love mine

[GiantKiwi]

Have had to resort to Brownells as no one in the UK has them in stock, so bought another pack of Magpul Gen M3 AR/M4 Ranger plates.

 

Also bought 2 packs of Federal Concepts mag locks, so I can install the ranger plates on the GM PMags without the shell yeeting the internals.

[ButcherBill]

Visited Airsoftworld in Fife today...

 

TM UGR-I aeg

NE Uzi

 

The Uzi is a bucket list item & always wanted it with a wooden stock, the UGR-I was a 'tism' thing, with AR15/M16 collection with gaps it became a want/need to have one, I was going to get the GBBR as TM seems to be a must for a GBBR but I preferred the longer barrel & gas mags are expensive & heavy.

 

Now I need to buy a battery for it...

 

If you read or remember my post about haggling, the plan was to ask for a deal on a gas URG-I, M16A2 & the Uzi but what I was willing to pay would certainly be too low & a bit cheeky so I opted for these two today & maybe the M16A2 next month.

 

Besides, I have an S&T BAR on it's way soon from Austeyr

 

& I couldn't post any pics without the typical above the radiator pic too.

Edited 3 hours ago by ButcherBill

[Enid_Puceflange]

2 hours ago, ButcherBill said:

Visited Airsoftworld in Fife today...

 

TM UGR-I aeg

NE Uzi

 

The Uzi is a bucket list item & always wanted it with a wooden stock, the UGR-I was a 'tism' thing, with AR15/M16 collection with gaps it became a want/need to have one, I was going to get the GBBR as TM seems to be a must for a GBBR but I preferred the longer barrel & gas mags are expensive & heavy.

 

Now I need to buy a battery for it...

 

If you read or remember my post about haggling, the plan was to ask for a deal on a gas URG-I, M16A2 & the Uzi but what I was willing to pay would certainly be too low & a bit cheeky so I opted for these two today & maybe the M16A2 next month.

 

Besides, I have an S&T BAR on it's way soon from Austeyr

 

& I couldn't post any pics without the typical above the radiator pic too.

I was there on Sat, put my hand on the VFC OSW (very nice) and the NE Uzi

The lad in on Sat afternoon was exceptionally chatty and friendly!

[ButcherBill]

1 minute ago, Enid_Puceflange said:

I was there on Sat, put my hand on the VFC OSW (very nice) and the NE Uzi

The lad in on Sat afternoon was exceptionally chatty and friendly!

Funnily enough I was fondling it too, was very tempting.

It was my first visit to a bricks & mortar airsoft shop and it was a very possitive experience, both the guys were great, chatted to the owner for ages (sorry I'm terrible with names), I've bought online from them before but don't think I realised they were so close (ish) to me, I'll deffo be back next month as I have my eye on the M16A2, and possibly something else a bit cheaper.