geoffreym Posted October 21, 2014 Share Posted October 21, 2014 Just bought a bunch of stuff for the Mobile Infantry load out I'm making, sew on unit patches, a grey jacket to convert into the MI combat jacket, etc. keep us updated on that, depended on how much it cost you, I might have a go. Link to comment Share on other sites More sharing options...
Chock Posted October 21, 2014 Share Posted October 21, 2014 keep us updated on that, depended on how much it cost you, I might have a go. Not going to cost that much to be honest, although it does require me to make the chest armour and the M3 tactical helmet, which is in progress (I'll post some pics when I've got something worth seeing). The helmet and armour are being made from craft foam (20 quid off ebay inc p&p) with some web belts and bits of trim added to them, then there is a drop leg holster attached to the armour (we don't see the pistol much in the movie, so I guess anything which fits my drop-leg holster goes). The MI uniform clothing is pretty basic, it's just a grey short zip-fronted jacket (8 quid off ebay inc p&p) with some black trim added to the collar and sides and some elbow patches in tan added to it, then three unit patches (which I got off ebay for 13 quid inc p&p) sewn onto it and black epaulettes. Under that is a black t-shirt and a black neck gorget. The pants are just plain grey ones with some black trim added along the inside leg (not got those yet, but I expect they'll be about ten quid). The original movie prop boots were in fact just trainers modified with the addition of higher ankle support plus a few velcro straps added, so some lightweight modern US combat boots can easily be modified to look like those. The Mobile Infantry's rifle is the (fictional) bullpup configuration Morita Assault Rifle, which (depending on which soldier was wielding it), is either a full-length Mk1 rifle with an underslung pump action, or a shorter Mk1 carbine version, or a scoped sniper version of the standard rifle, all of which are seen in the movie. Since the Morita is (like the movie itself) a bit of a parody of the rather politically incorrect fascist overtones in the Heinlein novel, it's somewhat comedically over-large (also because it was in reality a fibreglass shell which had a Ruger Mini 14 concealed inside it for the shots in the movie where the Morita was required to actually fire). In practical terms, I would like the load out to actually be usable, so I'm going to make the less stupidly big carbine version of the Morita (which also means I don't have to add the grenade launcher). Looking about for a suitable rifle to modify, I was first considering the recently-made fictional UAR airsoft AEG or perhaps an L85, but I've decided to use the Foreign Legion version of the FAMAS, which is already very close in appearance to the carbine Morita, so it should be a fairly easy transformation to make it look like a Morita without messing about with its functionality. Morita Carbine: http://www.imfdb.org/images/f/fb/HEROCarbine1.JPG FAMAS Carbine: http://en.wikipedia.org/wiki/FAMAS#mediaviewer/File:FAMAS_F1_with_bayonet.jpg Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 ^^Which is a laudable project and i wish you all the best, but airsoft FAMAS's aren't known for reliability or for the kind of spare parts availability that you'd want in a project gun. I'm wondering if a Type 97 might not be a better starting place? At least you know it will be bomb proof... Link to comment Share on other sites More sharing options...
Chock Posted October 21, 2014 Share Posted October 21, 2014 Quite possibly.. Might consider that. Link to comment Share on other sites More sharing options...
Guest PT247 Posted October 21, 2014 Share Posted October 21, 2014 TAG Innovation Gas Shell launcher (x2) TAG Innovation Reaper Explosive Projectile (x10) S-Thunder Co2 Adapter - with meter S-Thunder Dual Cartridge Co2 Cylinder S-Thunder Composite Grenade Launcher - Short Link to comment Share on other sites More sharing options...
geoffreym Posted October 21, 2014 Share Posted October 21, 2014 Not going to cost that much to be honest, although it does require me to make the chest armour and the M3 tactical helmet, which is in progress (I'll post some pics when I've got something worth seeing). The helmet and armour are being made from craft foam (20 quid off ebay inc p&p) with some web belts and bits of trim added to them, then there is a drop leg holster attached to the armour (we don't see the pistol much in the movie, so I guess anything which fits my drop-leg holster goes). The MI uniform clothing is pretty basic, it's just a grey short zip-fronted jacket (8 quid off ebay inc p&p) with some black trim added to the collar and sides and some elbow patches in tan added to it, then three unit patches (which I got off ebay for 13 quid inc p&p) sewn onto it and black epaulettes. Under that is a black t-shirt and a black neck gorget. The pants are just plain grey ones with some black trim added along the inside leg (not got those yet, but I expect they'll be about ten quid). The original movie prop boots were in fact just trainers modified with the addition of higher ankle support plus a few velcro straps added, so some lightweight modern US combat boots can easily be modified to look like those. The Mobile Infantry's rifle is the (fictional) bullpup configuration Morita Assault Rifle, which (depending on which soldier was wielding it), is either a full-length Mk1 rifle with an underslung pump action, or a shorter Mk1 carbine version, or a scoped sniper version of the standard rifle, all of which are seen in the movie. Since the Morita is (like the movie itself) a bit of a parody of the rather politically incorrect fascist overtones in the Heinlein novel, it's somewhat comedically over-large (also because it was in reality a fibreglass shell which had a Ruger Mini 14 concealed inside it for the shots in the movie where the Morita was required to actually fire). In practical terms, I would like the load out to actually be usable, so I'm going to make the less stupidly big carbine version of the Morita (which also means I don't have to add the grenade launcher). Looking about for a suitable rifle to modify, I was first considering the recently-made fictional UAR airsoft AEG or perhaps an L85, but I've decided to use the Foreign Legion version of the FAMAS, which is already very close in appearance to the carbine Morita, so it should be a fairly easy transformation to make it look like a Morita without messing about with its functionality. Morita Carbine: http://www.imfdb.org/images/f/fb/HEROCarbine1.JPG FAMAS Carbine: http://en.wikipedia.org/wiki/FAMAS#mediaviewer/File:FAMAS_F1_with_bayonet.jpg you might want to have a look at these guys for accuracy sake (and maybe save up for the helmet) http://chaucer44.squarespace.com/starship-troopes-morita/, and I know somebody did rubber mag covers which would increase the look of the gun tenfold. ^^Which is a laudable project and i wish you all the best, but airsoft FAMAS's aren't known for reliability or for the kind of spare parts availability that you'd want in a project gun. I'm wondering if a Type 97 might not be a better starting place? At least you know it will be bomb proof... every other FAMAS, I'd agree, but the TM is literally indestructible (very creaky though) remember reading somewhere that TM over reinforced everything because it was their first production rifle. the Type 97, I agree might actually be a better starting rifle, the mag is more accurate, and the gun itself is a more modern design. but you will need to do more external modification work, with the FAMAS all you literally need is the M60 flashhider, the funky forehand furniture, and the mag cover. Ian_Gere 1 Link to comment Share on other sites More sharing options...
team flex Posted October 21, 2014 Share Posted October 21, 2014 Hey guys i am back so what have i recently bought..... loads of stuff ... but recentest ASK MK23 SOCOM (that's right i have finally bought myself a gas gun, it wont be replacing my work horse CYMA G18c AEP, this is just for a little project ... and it was cheap ) i'm guessing you mean the ASG version. If so could you update us on this, a mate is looking to get one, and there seem to be no reviews on it welcome back btw and thanks Link to comment Share on other sites More sharing options...
Chock Posted October 21, 2014 Share Posted October 21, 2014 you might want to have a look at these guys for accuracy sake (and maybe save up for the helmet) http://chaucer44.squarespace.com/starship-troopes-morita/, Yeah, I considered that one, however, it's not the cost which made me chose not to go for that; since I work in post production and have made props in the past, I reckon I can make one for less that will look okay, especially since I'm making one from accurate drawings, which I have scaled up slightly. More to the point decision-wise however, although the one you linked to is molded from a genuine movie prop (I think a B stock one), it appears to have picked up some warping during the copying process from what I can see (not an uncommon occurrence when molding copies as anyone who has ever made a kit car AC Cobra will know). Another factor is that I know the movie ones are a touch on the small side for my big head lol. Besides which, making stuff is half the fun! Guess we'll see. Link to comment Share on other sites More sharing options...
Caliber Posted October 21, 2014 Share Posted October 21, 2014 I've bought myself a Cold Steel Training Gladius - as we're allowed them to "tag" people who are too close. In my eyes a Gladius is better than a knife! Although the hand and a half sword is also tempting me.... Almost bought the same thing before nabbing a Karambit instead. I was thinking of using a Cold Steel Bokken with a loadout, so if I run out of ammo I can just banzai charge. Could put it with a riot shield, actually... And to stay on topic, I bought a torch and mount of eBay for 15 quid, and have a tac vest on the way that I got for about 30 quid on Amazon. Here's the torch, will post pics of vest when it arrives: team flex 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 £15 for a simple low profile torch mount? What's it made from, a bronze cast of Michaelangelo's David's foreskin? cropzy, sp00n and Airsoft_Mr B 3 Link to comment Share on other sites More sharing options...
Guest PT247 Posted October 21, 2014 Share Posted October 21, 2014 it was a torch and mount if you read what he wrote! ;-) Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 Oops Airsoft_Mr B and team flex 2 Link to comment Share on other sites More sharing options...
Supporters sp00n Posted October 21, 2014 Supporters Share Posted October 21, 2014 i'm guessing you mean the ASG version. If so could you update us on this, a mate is looking to get one, and there seem to be no reviews on it welcome back btw and thanks yep i did mean ASG ill do an unboxing review and expand it when i skirmish it team flex 1 Link to comment Share on other sites More sharing options...
team flex Posted October 21, 2014 Share Posted October 21, 2014 1x G&P 55rnd VSR mag for a mate. 2x speedloaders. paper targets batteries another bottle of blaster devil .25s, bag of .20s Link to comment Share on other sites More sharing options...
Happy Posted October 21, 2014 Share Posted October 21, 2014 NCS 2.5x30 Scope with mounting rings. Bottle of 1200 ZeroOne 0.4g BBs. Czech skorpion holster and ammo pouch. Scope because a lucky ricochet took out my current one last game I was at. The BBs because I'm trying a new brand to try and save money (sniper ammo isn't cheap after all). The holster and ammo pouch because my current one looks out of place on my Russian themed sniper loadout, this is also big enough for my ASG MK23 (main sidearm). Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 The holster and ammo pouch because my current one looks out of place on my Russian themed sniper loadout, this is also big enough for my ASG MK23 (main sidearm). I had the same idea. To make them go with my Soviet portupeya, Y strap and belt harness stylee an ting, I used dark brown Dylon leather dye and put a slit in the side of the holster to allow for use with a mag attached (as the Czech police carried them with a short mag fitted) - I then added a leather strap and stud salvaged from a knackered old AK-47 mag pouch for additional security (it comes apart easily when I draw, but not by jiggling). Happy 1 Link to comment Share on other sites More sharing options...
Happy Posted October 21, 2014 Share Posted October 21, 2014 Seen it before, still looks great though Ian. I'm going to wait to see what shade I get sent before I start buying dye, but I may end up doing the same. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Esoterick Posted October 21, 2014 Supporters Share Posted October 21, 2014 Warrior DCS in OD and one of their duty belts as my army surplus one unclips too easily. M_P, Ian_Gere and Airsoft_Mr B 3 Link to comment Share on other sites More sharing options...
Supporters Monty Posted October 21, 2014 Supporters Share Posted October 21, 2014 Firefly bucking Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 Firefly bucking From eagle6? Link to comment Share on other sites More sharing options...
Supporters Monty Posted October 21, 2014 Supporters Share Posted October 21, 2014 From eagle6? Nah, ebay. Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 21, 2014 Supporters Share Posted October 21, 2014 Nah, ebay. Just searched = no joy. Can i get a linky pls? Link to comment Share on other sites More sharing options...
Supporters Monty Posted October 21, 2014 Supporters Share Posted October 21, 2014 Just searched = no joy. Can i get a linky pls? http://www.ebay.co.uk/itm/201199052222?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Out of stock already.. What's wrong with eagle6? Link to comment Share on other sites More sharing options...
TacMaster Posted October 22, 2014 Share Posted October 22, 2014 TAG Innovation Gas Shell launcher (x2) TAG Innovation Reaper Explosive Projectile (x10) S-Thunder Co2 Adapter - with meter S-Thunder Dual Cartridge Co2 Cylinder S-Thunder Composite Grenade Launcher - Short Let me know how you get on with the S-Thunder launcher, I've been debating buying it as a backup weapon for a while now Airsoft_Mr B 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted October 22, 2014 Supporters Share Posted October 22, 2014 Nothing wrong with eagle6 that i know of, but not exactly cheap (not extortionate either mind). I just wanted to know if anybody else in the UK was stocking them, so i could compare prices. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now