Show me your abominations

[Brokencreation]

I want to see your most scuffed or out there custom stuff you or someone made for you  here are mine. Oil filter ak’s and 3D printed body kits galore with cheap Chinese mosfets, they work most of the time  my faves is the mp5 swordfish that uses RC batteries and tacticool l85s. My best gun is my modded ghk g5 though it’s just always worked. My office is a bit of a perpetual flow between messy and tidy  :,)

Edited October 17, 2023 by Brokencreation
Spelling error

[Tackle]

[gavinkempsell]

I don't think I have any, got some two tones hiding in a box tho... we don't talk about the blue one's.

[MrTea]

10 hours ago, Brokencreation said:

 

I actually kinda like this. Nice MP9 by the way, is that the suppressor with or without the barrel extention?

[gavinkempsell]

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

[Shamal]

1 hour ago, gavinkempsell said:

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

That is fugly! No amount of rattle cans will make it right?

 

(The views of one person is not representative of the views of others)

 

It's still fugly.......?

 

Regards ?

 

[gavinkempsell]

25 minutes ago, Shamal said:

That is fugly! No amount of rattle cans will make it right?

100% correct, & that's why it's never left the box.

 

I'm a tight Scotsman so I still have it.

[Tackle]

21 minutes ago, gavinkempsell said:

100% correct, & that's why it's never left the box.

 

I'm a tight Scotsman so I still have it.

You've just got to mount on MUCH MUCH longer clips, no one will ever know?

[Adolf Hamster]

Made a couple abominations in my time:

 

Yes that's an m249 box mag on an mg42, no i will not elaborate further.

 

 

And this monstrousity puts a new meaning to the term "bore offset", forget a cheek weld or even a chin weld you couldnt even get a beard weld.

 

And whilst the gun might have been a superb shooter with bb's flying as straight and true as you can realistically get in this hobby, it doesnt help when the optic isnt zeroed, you cant really get in the eyebox due to its position but thats fine because even if you could its a gen 1 so you can't see shit anyway.

 

However with a red dot in daylight as ugly as that gun is it was a great thing to actually use.

 

Tried to get a picture of what i lovingly called the "scaffolding pole" due to its resemblance to, well, a scaffolding pole welded onto an m4 reciever, another one of those looks like shit shoots like a dream builds, alas i could not find one.

[Brokencreation]

3 hours ago, MrTea said:

 

I actually kinda like this. Nice MP9 by the way, is that the suppressor with or without the barrel extention?

without. I have bodged a tracer unit into it though 

2 hours ago, gavinkempsell said:

On second thoughts, I bought this thinkinjg I could rattle can it for my sniper wall but it's not even 1:1 scale... DOH!

big oof 

6 minutes ago, Adolf Hamster said:

Made a couple abominations in my time:

 

Yes that's an m249 box mag on an mg42, no i will not elaborate further.

 

 

And this monstrousity puts a new meaning to the term "bore offset", forget a cheek weld or even a chin weld you couldnt even get a beard weld.

 

And whilst the gun might have been a superb shooter with bb's flying as straight and true as you can realistically get in this hobby, it doesnt help when the optic isnt zeroed, you cant really get in the eyebox due to its position but thats fine because even if you could its a gen 1 so you can't see shit anyway.

 

However with a red dot in daylight as ugly as that gun is it was a great thing to actually use.

 

Tried to get a picture of what i lovingly called the "scaffolding pole" due to its resemblance to, well, a scaffolding pole welded onto an m4 reciever, another one of those looks like shit shoots like a dream builds, alas i could not find one.

Wont elaborate further, gigachad moment 

5 hours ago, Tackle said:

NO! my house is nice and tidy this is the only space i can make messy and not feel bad 

[PureSilver]

15 hours ago, Brokencreation said:

Vorpal Bunny AM.45

 

Is it even a real abomination if you don't hack it up a bit? ARMY Armament R45 "V6", customised with "V6" barrel porting and slide cuts, custom-milled mount for ACM Shield RMS, and a Nova trigger. Since these photos were taken it got an ARMY magazine release that's closer to the VB one, and I've flattened the grips. Still needs a new hammer, a dust cover rail, and battleship grey paintjob.

 

 

 

[Brokencreation]

28 minutes ago, PureSilver said:

 

Is it even a real abomination if you don't hack it up a bit? ARMY Armament R45 "V6", customised with "V6" barrel porting and slide cuts, custom-milled mount for ACM Shield RMS, and a Nova trigger. Since these photos were taken it got an ARMY magazine release that's closer to the VB one, and I've flattened the grips. Still needs a new hammer, a dust cover rail, and battleship grey paintjob.

 

 

 

 takes notes)

[Scythian]

Would this count? It's a Glock 17 that put on a bit of weight?

[Dan Robinson]

On 19/10/2023 at 07:39, Scythian said:

Would this count? It's a Glock 17 that put on a bit of weight?

That is truly cursed - but I kinda love it.

[Jaylordofwaargh]

How about this? Posted on a FB group with the question hot or heresy?

[Brokencreation]

On 20/10/2023 at 19:53, Jaylordofwaargh said:

How about this? Posted on a FB group with the question hot or heresy?

oooooo errryyy noiceeeee

On 19/10/2023 at 07:39, Scythian said:

Would this count? It's a Glock 17 that put on a bit of weight?

ugly yet sexy 

[Miêu Anh-Nguyễn]

My VFC BCM firing cycle too slow and is a little off range, so I'm going to replace it with a 6.01mm inner barrel

[Tackle]

10 minutes ago, Miêu Anh-Nguyễn said:

My VFC BCM firing cycle too slow and is a little off range, so I'm going to replace it with a 6.01mm inner barrel

That's an abomination how exactly ? 

[Miêu Anh-Nguyễn]

36 minutes ago, Tackle said:

That's an abomination how exactly ? 

There's one more thing that's hard for me to accept. BCM hop-up adopts a new adjustment method, which is adjusted directly on the airway, but due to the unstable structure, after shooting 5-7 magazines in a row, it will return to zero due to vibration, making the trajectory become a parabola.

[Cocha]

On 19/10/2023 at 08:39, Scythian said:

Would this count? It's a Glock 17 that put on a bit of weight?

 

This looks so wrong ?

[gavinkempsell]

Been sitting in pieces for ages awaiting my motivation...

 

Used to be a cheap Two Tone springer ((c) we don't talk about the blue one), got some 'DPM' stensils from freedomestencils back in October and finally used them.

 

Would I buy them again? yes but shipping was £££ so probably not for that reason.

Do I like the end result? yes but I lack the patience to do a proper job (some blue peeking through the paint where the stencil took off some base layers)

 

Still got some stencils left so I feel a Two Tone Scar-L will get similar treatment but with a bit more green in the mix, and possibly a lacquer finishing layer as the scar is likely to be used at some point.

 

Edited January 6, 2024 by gavinkempsell

[Alimcd]

I know I bring this one out whenever one of these threads appears but…

 

Based on a real gun, if you stormed Omaha beach without dying, in 10 minutes and with 20 kills back in 1944 you’d be able to equipment this chrome and carbon monstrosity when you next saw your quartermaster.

Built to try and tempt the wife into playing, she had said she wanted something that looked like it was from Borderlands. She ended up refusing to play and this got sold on…. 
 

King Arms Chrome receiver set and hydro dipped furniture. The icing on the upsetty-spaghetti for a real purist is that I cut the ears off the rear sight and drilled it to be a mounting fixture for the mini red dot

Edited January 6, 2024 by Alimcd

[Tackle]

On 06/01/2024 at 09:34, Alimcd said:

I know I bring this one out whenever one of these threads appears but…

 

Based on a real gun, if you stormed Omaha beach without dying, in 10 minutes and with 20 kills back in 1944 you’d be able to equipment this chrome and carbon monstrosity when you next saw your quartermaster.

Built to try and tempt the wife into playing, she had said she wanted something that looked like it was from Borderlands. She ended up refusing to play and this got sold on…. 
 

King Arms Chrome receiver set and hydro dipped furniture. The icing on the upsetty-spaghetti for a real purist is that I cut the ears off the rear sight and drilled it to be a mounting fixture for the mini red dot

You whip it out as often as you like Ali, I still gaze at it longingly ?

 

I should have bought it when I had the chance?

[BenJackson]

Why yes I enjoy ergonomics, how could you tell?

[Brokencreation]

On 11/01/2024 at 15:07, BenJackson said:

Why yes I enjoy ergonomics, how could you tell?

Oh my god it is so ugly i love it

 

On 06/01/2024 at 00:19, gavinkempsell said:

Been sitting in pieces for ages awaiting my motivation...

 

Used to be a cheap Two Tone springer ((c) we don't talk about the blue one), got some 'DPM' stensils from freedomestencils back in October and finally used them.

 

Would I buy them again? yes but shipping was £££ so probably not for that reason.

Do I like the end result? yes but I lack the patience to do a proper job (some blue peeking through the paint where the stencil took off some base layers)

 

Still got some stencils left so I feel a Two Tone Scar-L will get similar treatment but with a bit more green in the mix, and possibly a lacquer finishing layer as the scar is likely to be used at some point.

 

cannot go wrong with big pewpew