Spartan09 Posted October 17, 2021 Share Posted October 17, 2021 Also.. forgot to upload pics of the damage done to the blowback unit.. not sure if this will be serviceable with a new hammer, or if it will also need replacement.. Link to comment Share on other sites More sharing options...
Spartan09 Posted October 19, 2021 Share Posted October 19, 2021 found an action army hammer in stock with tango down airsoft and ordered it. hopefully it will be here by the end of the week so i can rebuilt it ready for the weekend. Link to comment Share on other sites More sharing options...
Dalno Posted November 3, 2021 Share Posted November 3, 2021 Hey all, I am finally part of the club after receiving my AAP a few weeks back. I was never a fan of the looks (which has now grown on me) but these looked like so much fun to use and at the price point it's hard to say no. I am looking to fit my x300 torch but cannot for the life of me find a rail set in stock anywhere. My question is, does anyone know where there are AAP-01 accessories in stock or is there somebody 3d printing rails? Thanks Link to comment Share on other sites More sharing options...
Sage088 Posted November 15, 2021 Share Posted November 15, 2021 I have a few questions on what I should put in my budget hi CAPA. (The AAP 01) I want to have the stock internals completely upgraded with these ones. Should I add or subtract any of these. Is there any of these I don't need to spend the money on because the stock internals are just as good. I want to start building this monstrosity soon. https://shop.jkarmy.com/cow-aap01-stainless-steel-hammer-set-for-aap01-gbb-aap-01.html https://shop.jkarmy.com/cow-aap01-enhance-plastic-nozzle-set-for-aap01-gbbp-series-aap-01.html https://shop.jkarmy.com/action-army-cnc-magwell-for-aap01-black-red.html https://shop.jkarmy.com/tti-airsoft-selector-switch-charge-handle-for-aap-01-gbb-pistol.html https://shop.jkarmy.com/action-army-aap01-black-mamba-cnc-upper-receiver-kit-b-aap-01.html Link to comment Share on other sites More sharing options...
Albiscuit Posted November 16, 2021 Share Posted November 16, 2021 The hammer is necessary. I thought about the selector switch but ultimately decided against it as I only use semi. Full auto is for those showing off moments but are so far between I couldn't really see the point in installing it. The only thing currently upgraded internally on mine is the hammer as the original melted on me. There will be a new trigger and a waldo short stroke kit in it soon but I cannot really comment on the nozzle set. Magwell and slide are purely gun bling really. I like the mamba slide but dont want to pay that price for it, I have a magwell but currently its not installed as it doesnt play nice with a drum mag. Link to comment Share on other sites More sharing options...
leadly Posted November 16, 2021 Share Posted November 16, 2021 From what Iv'e been seeing on social media, Waldo and Matt from iMakeit3D both have some new AAP-01 parts in their respective pipelines! Link to comment Share on other sites More sharing options...
leadly Posted December 13, 2021 Share Posted December 13, 2021 What a load of ball bags. I've not stripped it down yet but my AAP-SMG has shit it's hammer AGAIN by the looks of it. I replaced it with the updated AA version as I couldn't get a CowCow at the time. I'm genuinely considering just selling all the bits off it and forgetting it ever happened 😂 EDcase and Paul72 2 Link to comment Share on other sites More sharing options...
Skara Posted December 13, 2021 Share Posted December 13, 2021 14 minutes ago, leadly said: What a load of ball bags. I've not stripped it down yet but my AAP-SMG has shit it's hammer AGAIN by the looks of it. I replaced it with the updated AA version as I couldn't get a CowCow at the time. I'm genuinely considering just selling all the bits off it and forgetting it ever happened 😂 That sucks! It appears that the only option is to get a CowCow set then... Great, the thing is impossible to get here in Italy..I guess I'm fucked Paul72 and leadly 2 Link to comment Share on other sites More sharing options...
leadly Posted December 13, 2021 Share Posted December 13, 2021 (edited) It's genuinely frustrating. Probably had no more than 1000 rounds down it since I replaced the hammer and that's being pretty generous. I've made a point of not using full auto on it either. Yes it's been ran on HPA, but haven't used anything above 80 PSI. I normally get away with setting my reg for my MTW, which is about 75psi and that covers my AAP, MK23 and Hi Capa quite nicely. Edited December 13, 2021 by leadly Link to comment Share on other sites More sharing options...
Fatboy40 Posted December 13, 2021 Share Posted December 13, 2021 6 hours ago, leadly said: ... my AAP-SMG has shit it's hammer AGAIN by the looks of it. I replaced it with the updated AA version... The Action Army CNC Steel Hammer or the stock version 2 hammer found in the newer AAP-01's? Link to comment Share on other sites More sharing options...
leadly Posted December 13, 2021 Share Posted December 13, 2021 This exact bag of shite. Fatboy40 1 Link to comment Share on other sites More sharing options...
leadly Posted December 23, 2021 Share Posted December 23, 2021 (edited) Ok so I was wrong, this time it was the auto sear. Or atleast i think it is Is that the auto sear or what's left of it there? EDIT: Valve Knocker Sear apparently Edited December 24, 2021 by leadly Link to comment Share on other sites More sharing options...
Jamez229 Posted December 26, 2021 Share Posted December 26, 2021 (edited) Hey guys, just a quick question would an extended WE b92 mag from patrol base work in my aap? Thanks https://www.patrolbase.co.uk/we-europe-b92-b9-extended-50rnd-gas-magazine Edited December 26, 2021 by Jamez229 Link to comment Share on other sites More sharing options...
Fatboy40 Posted December 27, 2021 Share Posted December 27, 2021 14 hours ago, Jamez229 said: Hey guys, just a quick question would an extended WE b92 mag from patrol base work in my aap? Thanks https://www.patrolbase.co.uk/we-europe-b92-b9-extended-50rnd-gas-magazine This is the one you'd need... https://www.patrolbase.co.uk/we-europe-eu-series-eu17-18-extended-50rnd-gas-magazine Jamez229 and Paul72 1 1 Link to comment Share on other sites More sharing options...
Jamez229 Posted December 27, 2021 Share Posted December 27, 2021 (edited) 1 hour ago, Fatboy40 said: This is the one you'd need... https://www.patrolbase.co.uk/we-europe-eu-series-eu17-18-extended-50rnd-gas-magazine Any idea if there is any other extended mags that would fit the aap, Because its out of stock? And also just to make sure that mag will not fit in my aap then? Edited December 27, 2021 by Jamez229 Link to comment Share on other sites More sharing options...
Hudson Posted December 27, 2021 Share Posted December 27, 2021 That one's for an M92. You need one designed for glocks. https://airsoftdirect.uk.com/we-17-18-50-round-extended-magazine/ Jamez229 1 Link to comment Share on other sites More sharing options...
leadly Posted December 27, 2021 Share Posted December 27, 2021 I may have 2 x WE extended mags I would consider parting with. Link to comment Share on other sites More sharing options...
AlphaBear Posted December 29, 2021 Share Posted December 29, 2021 On 23/12/2021 at 12:18, leadly said: Ok so I was wrong, this time it was the auto sear. Or atleast i think it is Is that the auto sear or what's left of it there? EDIT: Valve Knocker Sear apparently Does this means that the Cow Cow complete hammer kit set would be needed regardless? I was going to buy the CTN hammer from airsoftworld as a backup but may not bother now.... Might swell buy the Cow Cow set... Link to comment Share on other sites More sharing options...
leadly Posted December 30, 2021 Share Posted December 30, 2021 Unfortunately not mate, the hammer set includes: "Hammer Set Including Hammer, Sear, Firing Pin, Rotor & Rotor Spring For Action Army AAP01" I've managed to find one in-stock at fire-support. I really am impressed with the amount of random bits and bobs they have! Once it's fixed I need to have a sit down and think about whether I keep it or sell it as it just isn't getting used. Paul72 1 Link to comment Share on other sites More sharing options...
C-Diddy Posted December 30, 2021 Share Posted December 30, 2021 Recently bought an AAP-01 and, although they do seem a lot of fun, I really don't think it's for me. Anyone wanting a tan version keep your eyes on the classifieds soon 👀 Paul72 1 Link to comment Share on other sites More sharing options...
Steveiow Posted January 3, 2022 Share Posted January 3, 2022 On 27/12/2021 at 23:02, leadly said: I may have 2 x WE extended mags I would consider parting with. Could I buy one pls ? How much posted ? Link to comment Share on other sites More sharing options...
JSilversides Posted January 11, 2022 Share Posted January 11, 2022 On 04/07/2021 at 08:43, leadly said: Tonight's job, should I get chance, is to HPA tap my drum mag and get that set up for around 300fps. Already managed to get my tracer to fit inside my KAC QD supressor so I'll be good to go. Plans are first few games with the AAP SMG then finish the day with the Hi Capa. Have you experienced any feeding issues with the HPA tapped AW drum mag? Currently looking for a solution as I’ve recently put the hadron bouncer kit in mine along with a flamingo 60 bucking and a hadron Hplate and I’m finding every 4-5 bb’s I get a dry fire. Pretty certain it’s the drum mag as I’ve tried with the standard gas mag and had no feeding issues Link to comment Share on other sites More sharing options...
Skara Posted January 11, 2022 Share Posted January 11, 2022 3 hours ago, JSilversides said: Have you experienced any feeding issues with the HPA tapped AW drum mag? Currently looking for a solution as I’ve recently put the hadron bouncer kit in mine along with a flamingo 60 bucking and a hadron Hplate and I’m finding every 4-5 bb’s I get a dry fire. Pretty certain it’s the drum mag as I’ve tried with the standard gas mag and had no feeding issues I'd look at the feed lips, compare the drum to your standard mags and see if there are any differences in dimension or shape. leadly and Paul72 2 Link to comment Share on other sites More sharing options...
Albiscuit Posted January 12, 2022 Share Posted January 12, 2022 So i have finally put my melted AAP back together with the new hammer and trigger parts but something is catching now. When I pull the slide back to cock it most of the time its fine but sometimes it catches on something. I cant seem to work out exactly what its hitting, anyone had a similar issue? Link to comment Share on other sites More sharing options...
JSilversides Posted January 12, 2022 Share Posted January 12, 2022 On 11/01/2022 at 20:50, Skara said: I'd look at the feed lips, compare the drum to your standard mags and see if there are any differences in dimension or shape. Had a look and they are exactly the same from what I can see, the AW drum mag is commonly used with the AAP too so I don’t think compatibility is the issue I’m having Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now