AlphaBear Posted September 23, 2020 Share Posted September 23, 2020 2 hours ago, SSPKali said: I have 6 but rarely run them all. In CQB type games I can use 2 - 2.5 in all. I often change mags in a lull in the fighting before they are empty just so I don't get caught out. Woodland games are a bit different, especially on windy days but if you know the limits of the platform it isn't too bad. If you are sensible and only shoot at what you can see / hit 35rds goes a long way. I only play woodland so more time to reload under cover etc I guess but 5 mags is an odd number. Better buy another to make it even as my vest has 6 pouches 😂 Edit: Just checked it has 10 pouches! 😮 Link to comment Share on other sites More sharing options...
Hypokondrikern Posted September 23, 2020 Share Posted September 23, 2020 I ran my MWS for a skirmish the other weekend and experimented during the day with different ways of carrying the 6 mags I brought along. My setup is more of a DMR with a scope so I only used 1-2 mags per game and brought out the pistol for shorter engagements. It was still useful to have the extra mags for less loading time in between the games but 6 seem like one or two too much for my play style even for a milsim. It is also interesting to see how your pistol sees more action with less mags at hand. An observation I think someone else mentioned here earlier - where the pistol comes to use rather than being a decorative charm. Still struggling with the perfect minimal setup but most comfy was having one magazine in the belt, one in the MWS and a sling pack with water and an emergency mag. Belt with a mag and rackminus from BFG with three pmags was also comfy but made it harder to crawl and haven’t found a water carrier which is compatible. Link to comment Share on other sites More sharing options...
Cipher-032 Posted September 23, 2020 Share Posted September 23, 2020 Personally, I run 3 mags in my plate carrier, 1 mag in the gun, 2 on a double stack on my shooters belt. Does me perfectly. camden 1 Link to comment Share on other sites More sharing options...
AlphaBear Posted September 23, 2020 Share Posted September 23, 2020 Weather is saying 14c for Sunday. Damn that’s cold! Guess autumn is finally upon us. Abbey ultra predator gas should be fine I assume? On a bb loading note, I’ve just got a Marui XL speed loader come in today. It’s still kinda tough loading the mags. That spring is one tough mother that’s for sure. Is that what people are generally using to load their mags? RMDavis 1 Link to comment Share on other sites More sharing options...
SSPKali Posted September 23, 2020 Share Posted September 23, 2020 11 minutes ago, AlphaBear said: On a bb loading note, I’ve just got a Marui XL speed loader come in today. It’s still kinda tough loading the mags. That spring is one tough mother that’s for sure. Is that what people are generally using to load their mags? Yep, I have a TM M4 and pistol speed loaders and they fill the mags fine, you just get huge thumb muscles 👍🤣 AlphaBear and RMDavis 1 1 Link to comment Share on other sites More sharing options...
JSwan Posted September 23, 2020 Share Posted September 23, 2020 54 minutes ago, AlphaBear said: Weather is saying 14c for Sunday. Damn that’s cold! Guess autumn is finally upon us. Abbey ultra predator gas should be fine I assume? On a bb loading note, I’ve just got a Marui XL speed loader come in today. It’s still kinda tough loading the mags. That spring is one tough mother that’s for sure. Is that what people are generally using to load their mags? Thanks for the advice guys, I think I’ll leave the mags alone for now until I find it becomes a real problem. I currently run 3 mags might get a 4th but 3 seems to suit my play style Alpha bear I have a speed loader with a pistol adaptor and it works great, I find it easier to tilt I up every so slightly and hold the top down against the adaptor with a spare finger Link to comment Share on other sites More sharing options...
P4radox Posted September 24, 2020 Share Posted September 24, 2020 PMag update 2.0 Just solved the leakage problem! I need a few more days to make sure its reliable ... Probably they not gave proper attention for screw in.... Link to comment Share on other sites More sharing options...
AlphaBear Posted September 24, 2020 Share Posted September 24, 2020 Chaps, will this Element valve key work fine with the MWS mags? https://www.fire-support.co.uk/product/element-valve-key-for-marui-gas-guns Link to comment Share on other sites More sharing options...
marine Posted September 24, 2020 Share Posted September 24, 2020 7 hours ago, P4radox said: PMag update 2.0 Just solved the leakage problem! I need a few more days to make sure its reliable ... Probably they not gave proper attention for screw in.... Hi , I was problem with o-ring union middle mag .. use PTFE to repair . If you have dudes to PMAG , I did a lot of test to better performance Link to comment Share on other sites More sharing options...
P4radox Posted September 24, 2020 Share Posted September 24, 2020 1 hour ago, marine said: Hi , I was problem with o-ring union middle mag .. use PTFE to repair . If you have dudes to PMAG , I did a lot of test to better performance Yes that O-ring is a piece of sheet.... But after 16 hours its still keeps in the 11g propane ! I will drop on the scale again few days later. Link to comment Share on other sites More sharing options...
marine Posted September 24, 2020 Share Posted September 24, 2020 4 hours ago, P4radox said: Yes that O-ring is a piece of sheet.... But after 16 hours its still keeps in the 11g propane ! I will drop on the scale again few days later. I check leak introducing mag under water ... I wait 5-10min and see that it´s ok Link to comment Share on other sites More sharing options...
Wild Weasel Posted September 24, 2020 Share Posted September 24, 2020 10 hours ago, AlphaBear said: Chaps, will this Element valve key work fine with the MWS mags? https://www.fire-support.co.uk/product/element-valve-key-for-marui-gas-guns Looks like what I've got. AlphaBear 1 Link to comment Share on other sites More sharing options...
shivarussell Posted September 24, 2020 Share Posted September 24, 2020 Guys can you get a co2 mag for this gun? (and would it be okay on a stock weapon with no mods) links please if there is any... cheers Link to comment Share on other sites More sharing options...
EvilMonkee Posted September 24, 2020 Share Posted September 24, 2020 39 minutes ago, shivarussell said: Guys can you get a co2 mag for this gun? (and would it be okay on a stock weapon with no mods) links please if there is any... cheers No Link to comment Share on other sites More sharing options...
Hypokondrikern Posted September 24, 2020 Share Posted September 24, 2020 23 hours ago, P4radox said: PMag update 2.0 Just solved the leakage problem! I need a few more days to make sure its reliable ... Probably they not gave proper attention for screw in.... I had the same problem. Sneaky leaks. Greased all o-rings. Still leaky. Found this screw and lubed it - so far all fine. how was it to reassemble the upper and lower part? Looks like a pain Link to comment Share on other sites More sharing options...
Hypokondrikern Posted September 25, 2020 Share Posted September 25, 2020 Hey, did anyone try the G&P roller bolt end? It’s quite expensive for a wheeled bolt end ... but all rifles with it give off such a satisfying sound. Also - G&P has a buffertube with the selling point of holes for exhausting air / gases. Could someone explain to me how this would be beneficial or whether it’s just a gimmick? Link to comment Share on other sites More sharing options...
JSwan Posted September 25, 2020 Share Posted September 25, 2020 8 hours ago, Hypokondrikern said: Hey, did anyone try the G&P roller bolt end? It’s quite expensive for a wheeled bolt end ... but all rifles with it give off such a satisfying sound. Also - G&P has a buffertube with the selling point of holes for exhausting air / gases. Could someone explain to me how this would be beneficial or whether it’s just a gimmick? Haven’t tried it, what is it designed to do and how does it change the noise? Link to comment Share on other sites More sharing options...
P4radox Posted September 25, 2020 Share Posted September 25, 2020 11 hours ago, Hypokondrikern said: I had the same problem. Sneaky leaks. Greased all o-rings. Still leaky. Found this screw and lubed it - so far all fine. how was it to reassemble the upper and lower part? Looks like a pain Yeah..the reassamble is not pleasant but not difficult as it looks like...so the screw engage to the overhanging rod ,just need to find the good angle. Pmag update 2.5 : (2nd Day)still keeps! Hypokondrikern 1 Link to comment Share on other sites More sharing options...
JSwan Posted September 25, 2020 Share Posted September 25, 2020 My Angrygun L119A2 rail arrived today! Pretty happy with the look. Just waiting on a Magpul stock PopRocket123, Wo1f and SSPKali 3 Link to comment Share on other sites More sharing options...
Hypokondrikern Posted September 25, 2020 Share Posted September 25, 2020 10 hours ago, JSwan said: Haven’t tried it, what is it designed to do and how does it change the noise? It is supposed to give a smoother operation of the bolt and seem to work as intended. Look at my previous post about their complete kit for the MWS. The sound is incredible. Yet ... the holes are mysterious to me... 6 hours ago, P4radox said: Yeah..the reassamble is not pleasant but not difficult as it looks like...so the screw engage to the overhanging rod ,just need to find the good angle. Pmag update 2.5 : (2nd Day)still keeps! crossing my fingers. Thanks for sharing! Link to comment Share on other sites More sharing options...
P4radox Posted September 25, 2020 Share Posted September 25, 2020 2 hours ago, Hypokondrikern said: crossing my fingers. Thanks for sharing! Your welcome guys! I'll update again at Day 7! Link to comment Share on other sites More sharing options...
P4radox Posted September 25, 2020 Share Posted September 25, 2020 When you see a lot of mws being sold...., you can be sure there is a crisis! 😂🤔🤔😔😔😔😔 Hypokondrikern and JSwan 2 Link to comment Share on other sites More sharing options...
Marroksteel Posted September 26, 2020 Share Posted September 26, 2020 Going down the rabbit hole...... at least I'm in California and the weather is good year round. And if you can get etsy stuff shipped to the United kingdom this my be a nifty item. https://www.etsy.com/listing/855357705/speed-loader-adapters-compatible-with?ref=shop_home_active_1&variation0=1505309745 Wo1f 1 Link to comment Share on other sites More sharing options...
AlphaBear Posted September 26, 2020 Share Posted September 26, 2020 Hop adjustment question guys. When looking at the hop through the mag well with the barrel pointing to the left to increase the hop you turn the wheel in the opposite direction ie towards the right towards the stock end yeah ? Link to comment Share on other sites More sharing options...
Marroksteel Posted September 26, 2020 Share Posted September 26, 2020 24 minutes ago, AlphaBear said: Hop adjustment question guys. When looking at the hop through the mag well with the barrel pointing to the left to increase the hop you turn the wheel in the opposite direction ie towards the right towards the stock end yeah ? @AlphaBear After looking at a few pictures i would say in a clockwise direction counterclockwise if done via the dust cover side. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now