Supporters Ian_Gere Posted April 12, 2014 Supporters Share Posted April 12, 2014 Yeah I'm pleased with it in the main. There's a couple of bits that need a touch up, which is a ball ache because the method... I used a homebrew mix of acetone and dichloromethane on 0000 steel wool to strip it and prep the surface, but some bits needed a bit of fine sand paper to get the surface porous enough to accept the water based stain, particularly the gas tube cover. The stain itself is called Van Dyke crystals - apparently it's made from burnt walnut shells and it's well cheap. You can mix it in hot water but I just put a bit more volume of water to crystals in a tray and left it overnight to dissolve, because I knew I wanted it very dark. I used a 5mm paintbrush to put it on with a bit of irregularity and blend and Humbrol satin varnish spray. In needs another couple of layers of varnish to finish it properly, but as I say there's a couple of bits that need a redo... I was just putting it back together after changing the inner barrel to the new Falcon 6.03x455mm that arrived this am and... the fucking MOSFET burnt out! ARSEHOLE! It's definitely not my fault though - I've gone over the wiring with a magnifying glass and there's no break in the insulation so I've fired off an email to the supplier V^^Vgrrrrrrrrrrrrrrrr! Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 12, 2014 Supporters Share Posted April 12, 2014 I think I'm going to buy a bakelite effect grip because it will be a right pain trying to get the effect with diluted cheapo wood varnish (which is the effect on the mag). Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 14, 2014 Share Posted April 14, 2014 My rebuilt Ex Hire CA M15A4s Airsoft_Mr B and Monty 2 Link to comment Share on other sites More sharing options...
Dalloway Posted April 16, 2014 Share Posted April 16, 2014 My new toy! Can't wait to use it this Sunday! Monty 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 16, 2014 Share Posted April 16, 2014 My DayZ weaponry is coming along nicely, still working on the outfit tho! Link to comment Share on other sites More sharing options...
Mr Monkey Nuts Posted April 16, 2014 Share Posted April 16, 2014 I found some spare krylon ... Airsoft_Mr B and Monty 2 Link to comment Share on other sites More sharing options...
TacMaster Posted April 16, 2014 Share Posted April 16, 2014 My DayZ weaponry is coming along nicely, still working on the outfit tho! I like the fire axe and the beans, you should get a crash helmet as well to fit in with those South Coast feels CaptainDumbass 1 Link to comment Share on other sites More sharing options...
THE FNG Posted April 17, 2014 Share Posted April 17, 2014 First time I've posted my guns on here.....here goes! Bottom to top: Classic Army UMP VFC SCAR-L A&K Dragunov SVD Wondering whether to use black or tan mags in the SCAR? And if you're wondering about the SVD's size...I'm 5'9 and it comes up to my chin!! Monty, Ian_Gere and Lozart 3 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 17, 2014 Supporters Share Posted April 17, 2014 Where did you get that axe, PT? Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 17, 2014 Share Posted April 17, 2014 Is that you Eugene? Ian_Gere 1 Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 17, 2014 Supporters Share Posted April 17, 2014 Is that you Eugene? I almost said something similar, but I didn't think anyone else would get it CaptainSwoop 1 Link to comment Share on other sites More sharing options...
Guest PT247 Posted April 17, 2014 Share Posted April 17, 2014 Am at the BSB this weekend but will post a link when home :-) Link to comment Share on other sites More sharing options...
jim1h Posted April 18, 2014 Share Posted April 18, 2014 First posting of my gun pic :-) JG Sig 552 purchased from forum member. I have added some externals to it as it was already upgraded internally. So the suppressor, light, grip and red dot are new to the gun, still waiting on a cheek riser. First skirmish with it this Sunday. Ian_Gere and Airsoft_Mr B 2 Link to comment Share on other sites More sharing options...
remus Posted April 24, 2014 Share Posted April 24, 2014 heres where im not at with my guns. needs more pistols me thinks... Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 25, 2014 Supporters Share Posted April 25, 2014 ^^Needs an AK, methinks... remus 1 Link to comment Share on other sites More sharing options...
Russe11 Posted April 25, 2014 Share Posted April 25, 2014 Not my work but someone on the WW2 airsoft forums has just made this: Works on a Ver7 gearbox apparently. More pics and details here http://www.ww2airsoft.org.uk/php/phpBB2/viewtopic.php?f=13&t=17948 Happy, rexfan10, TacMaster and 1 other 4 Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 25, 2014 Share Posted April 25, 2014 lol pram wheels Happy and Ian_Gere 2 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted April 25, 2014 Supporters Share Posted April 25, 2014 Gotta be the biggest AEG ever. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 25, 2014 Share Posted April 25, 2014 It's well made but the proportions are well, shall we say 'off' The 2cm Flak sits on a flat metal turntable with 3 'feet' to adjust for rough ground. It's wheels are part of a separate carriage that the gun is raised and fastened in to turntable and all. Those wheels are the size of car tires on the real thing. http://www.2ndpanzerdivision.com/flak_40.htm a real one German 2cm is way over engineered for the size of gun. British Army 20mm mounts were a lot more compact and simple http://www.milweb.co.uk/classifieds/large_image.php?ad=69168&cat=6 http://www.wwpd.net/2013/02/review-battlefronts-20mm-polsten-aa-gun.html Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 25, 2014 Supporters Share Posted April 25, 2014 Not really over-engineered, just a different beast. The British one has a carriage that just about sits on the ground; the recoil would be transmitted pretty much straight down so the flexing of the base is supported. The German gun is more versatile; it was used as an anti-materiel weapon as well as anti-aircraft so the additional weight would allow greater accuracy. Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 25, 2014 Share Posted April 25, 2014 still say over engineered. It makes more sense in the quad mount though Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted April 25, 2014 Supporters Share Posted April 25, 2014 I suspect the French Commandos who faced one at the casino in Ouistreham on D-Day would probably have agreed with you. If that poxy thing had been less accurate their job would have been a lot easier! Link to comment Share on other sites More sharing options...
CaptainSwoop Posted April 25, 2014 Share Posted April 25, 2014 It's not the accuracy it's the size of the mount. It's a perfect example of a weapon designed in a time of peace. Later models of the German weapon were cut right down, the lost the armour plates for a start. There used to be a great big power operated 20mm mount that the RN used back at the start of the war. It was abandoned in favour of the simple pedestal mounted gun and powered 40mm mounts. Here is a fine example of an over engineered gun. http://householdcavalry.info/mgg1918.html Link to comment Share on other sites More sharing options...
Popular Post Airsoft_Mr B Posted April 25, 2014 Popular Post Share Posted April 25, 2014 CYMA AK-47 Ian_Gere, cropzy, Esoterick and 3 others 6 Link to comment Share on other sites More sharing options...
Supporters Monty Posted April 25, 2014 Supporters Share Posted April 25, 2014 Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now