Jump to content

Gun picture thread


M_P

Recommended Posts

20 minutes ago, Sd96 said:

GERMAN PP 

IMG_0568.jpeg

IMG_0569.jpeg

IMG_0570.jpeg

IMG_0571.jpeg

IMG_0574.jpeg

IMG_0575.jpeg

 

Where did you get the straight foregrip?

Link to comment
Share on other sites

Been building a m723 and m727 for a good part of the year after buying the suppressors from this forum..

This is the 727 so far and was aimed at being a gordon sniper.. 

Good pal pointed out wrong mount for the touch.. doh I owned spez's blood diamond 727 back in the day and just copied how he did it.. 

20241204_213122.jpg

Link to comment
Share on other sites

I like those movie accurate suppressors, more aesthetically pleasing that the Allen engineering one they actually used at the time…

 

Maybe it’s just imprinted in my brain from watching it a gazillion times over the years.

Link to comment
Share on other sites

2 hours ago, Wavey_Gravey said:

I like those movie accurate suppressors, more aesthetically pleasing that the Allen engineering one they actually used at the time…

 

Maybe it’s just imprinted in my brain from watching it a gazillion times over the years.

I love the movie gun the biggest pain has been trying to find the aimpoint mount ... just gave up and got a clone of a rs unit.. 

The 723 has a silly long king arms ops suppressor my biggest issue is its a gov marked lower.. plan was to build both film version and rs.. all on a tight budget 🤣

Link to comment
Share on other sites

found a Donor (CYMA) for my KS-1 build. Now the hard part begins, so much to do.

image.thumb.jpeg.25da881f6eb0bca5db7108c164a6e179.jpeg

if anyone is interested the plan is:

remove the QD points from the rear of the lower receiver.

chop out the right side bolt release and replace with a 3D modelled correct version.

either find or make the correct fire selectors

engrave both side of the lower

modify the charging handle to be ambi

print a outer barrel sleeve to replicate the dimples on the real thing

Cerakote everything

fit aftermarket parts (rail, grip etc) - still need to find knock off Mbus Pro sights and the stock pipe QD point

I've got a ACRO P2 but need to find the reptilla scope mount and find a suitable short dot that's close to the Vertex 1-10 (not spending £2000 on a scope!)

 

This may take a while.

Link to comment
Share on other sites

  • 2 weeks later...

I've never been a big fan of CYMA. Always found them a bit meh. I picked this up recently and it's actually a bit good. It's a CYMA Noveske Infidel for those that are interested. Comes with a eshooter mosfet as standard. I even like the midcap as it holds 190.

image.thumb.jpeg.85bc869dacbf06fcf626dd19294f935f.jpeg

Only thing done to it was swap out the stock for a Magpul slim profile one and replace the hop rubber with the 4Uantum friction Pro as I'm finding them very good.

 

Link to comment
Share on other sites

40 minutes ago, mightyjebus said:

I've never been a big fan of CYMA. Always found them a bit meh. I picked this up recently and it's actually a bit good. It's a CYMA Noveske Infidel for those that are interested. Comes with a eshooter mosfet as standard. I even like the midcap as it holds 190.

image.thumb.jpeg.85bc869dacbf06fcf626dd19294f935f.jpeg

Only thing done to it was swap out the stock for a Magpul slim profile one and replace the hop rubber with the 4Uantum friction Pro as I'm finding them very good.

 

CYMA platinum M4s have always kicked ass, no idea they were doing Noveske stuff. Cool pew!

Link to comment
Share on other sites

It’s not a perfect fit, little bit of wobble, but absolutely acceptable for airsoft, or operations…

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...