GenuineGerman Posted August 23 Share Posted August 23 18 minutes ago, MrTea said: On an unrelated note; does anyone think they can 3D print these shells for the shell ejecting Kar98K? Link to the file. I can give it a go on my printer but I think resin would be to brittle and crack. Link to comment Share on other sites More sharing options...
MrTea Posted August 23 Share Posted August 23 (edited) 27 minutes ago, GenuineGerman said: I can give it a go on my printer but I think resin would be to brittle and crack. The guy who made them has a Reddit post which is where I found he actually published the file. Given they're probably relatively cheap to print, i'd assume they're one time use thing so you don't need to scavenge them back up so it won't matter if they're super fragile. As long as they work once, they're good. IIRC he's printing them in ABS. Here's a link to his thread. Edited August 23 by MrTea Link to comment Share on other sites More sharing options...
GenuineGerman Posted August 23 Share Posted August 23 22 minutes ago, MrTea said: The guy who made them has a Reddit post which is where I found he actually published the file. Given they're probably relatively cheap to print, i'd assume they're one time use thing so you don't need to scavenge them back up so it won't matter if they're super fragile. As long as they work once, they're good. IIRC he's printing them in ABS. Here's a link to his thread. No worries will give it a go this weekend and see what results I get Link to comment Share on other sites More sharing options...
MrTea Posted August 23 Share Posted August 23 11 minutes ago, GenuineGerman said: No worries will give it a go this weekend and see what results I get Nice one, ty. I'm kind of praying it works because the metal shells are cheap metal, damage easily but are expensive Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted September 3 Popular Post Share Posted September 3 Was asked to knock up a stubby suppressor for the NGRS MP5SD so that it could take a Acetech Brighter C inside. Turned out pretty good I think. Nick G, Egon_247, ButcherBill and 2 others 2 3 Link to comment Share on other sites More sharing options...
Jhp18061992 Posted September 11 Share Posted September 11 Question for the big brains, has anyone made something like the aps uar? Like I have a spare v3 gearbox, I could cobble together a hop and barrel easily enough, any though on what 3d printed things I could use them on? Link to comment Share on other sites More sharing options...
PopRocket123 Posted September 13 Share Posted September 13 This is what happens when you let someone with adhd who is incapable of making a decision design something. You get 4 different versions of the same thing Tackle, GothicGhost and Egon_247 2 1 Link to comment Share on other sites More sharing options...
Popular Post mightyjebus Posted September 18 Popular Post Share Posted September 18 Was asked to knock up a Magpul style MP5 handguard as the real thing seems to be out of stock everywhere. It's not an exact copy but close enough I think. Top one is printed smooth in ABS and the bottom one in PLA using the Bambu labs fuzzy setting. ButcherBill, Nick G, Egon_247 and 3 others 4 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 20 Share Posted September 20 to go with the Magul style handguard I was asked to knock up a suppressor that could take a Acetech Brighter S or C and use the TM supplied trilug adapter. ButcherBill and Hotweeweejef 1 1 Link to comment Share on other sites More sharing options...
mightyjebus Posted September 27 Share Posted September 27 Another day, another project. After getting messed around by JK Army I ended up buying a L85A3 MLOK rail directly from Angry Gun. This is getting fitted to a Ares L85A3 and obviously isn't a direct fit. I was going to chop up the Ares to make it work but since I have 3D printers, it seemed rude not to knock something up. Below is the 3D model. The V1 prototype is on the bottom and the original part on the top. V2 is in the printer now as I had to make some adjustments. Once I'm happy with the shape I'll start modding the 3D model to fit the Angry Gun rail. I also printed a very thin barrel band so that the Angry Gun gas block could be used. Justjay1986 and ButcherBill 2 Link to comment Share on other sites More sharing options...
mightyjebus Posted October 2 Share Posted October 2 (edited) A couple of other things I've been working on. I got the EMG speedloader but battery size is limited so I knocked up a base that allows for a larger battery and somewhere to keep all the adapters otherwise I'll lose them in about 5 minutes. I also bought the WELL Rattler and didn't fancy using the PEQ box for the battery so I knocked up a longer rattler style handguard and added a 50mm barrel extension to allow for a saddlebag lipo to be contained inside the handguard. Original handguard is shown to show the size difference. Edited October 2 by mightyjebus BigAl, PopRocket123, ButcherBill and 1 other 3 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 2 Share Posted October 2 This is actually for an air rifle but I'm really happy with how it's coming out. It's for the Reximex Pretensis and is based on the KRG Whiskey 3 chassis. Not bad for 3 days work. Now onto the boring stuff. Screw fittings etc. mightyjebus and ButcherBill 1 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted October 2 Share Posted October 2 Will 3D polymer stuff be strong enough for this? Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 2 Share Posted October 2 2 hours ago, ButcherBill said: Will 3D polymer stuff be strong enough for this? I print in carbon fibre reinforced ABS which is plenty strong. You just have to think about the direction of the layers when you're working out print orientation. And in this case I'm going to need to split it to fit in the print bed. So I'm going to split it at 45° angles in order to maximise surface area when I stick it together ButcherBill 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted October 4 Share Posted October 4 Technically a scale model but built this today... 4X20 scope for my AR15 family, just for the looks & on a budget. mightyjebus, PopRocket123, Impulse and 1 other 4 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted October 4 Share Posted October 4 On 03/10/2024 at 00:47, PopRocket123 said: I print in carbon fibre reinforced ABS which is plenty strong. You just have to think about the direction of the layers when you're working out print orientation. And in this case I'm going to need to split it to fit in the print bed. So I'm going to split it at 45° angles in order to maximise surface area when I stick it together How stiff if that material? I've been slowly working on a benchrest stock design for my HFT500 (quoted £750 to get a custom one done) and was looking at using PPS-CF - but at £115 a roll it ain't cheap. I need to minimise flex otherwise there could be POI-shift issues. Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 5 Share Posted October 5 17 hours ago, Speedbird_666 said: How stiff if that material? I've been slowly working on a benchrest stock design for my HFT500 (quoted £750 to get a custom one done) and was looking at using PPS-CF - but at £115 a roll it ain't cheap. I need to minimise flex otherwise there could be POI-shift issues. I haven't printed anything this big before so we'll see how it comes out. I'm not expecting it to be on par with some of those custom stocks out there but it's only for a fairly cheap Reximex Pretensis so I doubt it's got good enough performance to see much difference. It'd be interesting to experiment to see if I can come up with something solid enough to be good for that Link to comment Share on other sites More sharing options...
ButcherBill Posted October 8 Share Posted October 8 Bought not my print, an Aim-01 for my M14 PopRocket123 1 Link to comment Share on other sites More sharing options...
BigAl Posted October 8 Share Posted October 8 On 02/10/2024 at 20:36, mightyjebus said: A couple of other things I've been working on. I got the EMG speedloader but battery size is limited so I knocked up a base that allows for a larger battery and somewhere to keep all the adapters otherwise I'll lose them in about 5 minutes. First thing I though when I saw these an the tiny battery space was I wonder how long before someone kocks up a printed extension. Nice one. Get em up for sale, make yourself a few quid. lol Link to comment Share on other sites More sharing options...
Moderators Popular Post Jez_Armstrong Posted October 11 Moderators Popular Post Share Posted October 11 (edited) No one made a B&T sliding stock for a K that was an AEG without spending £155 on the Bow version and cutting it to make fit, so I made my own Edited October 11 by Jez_Armstrong Sd96, mightyjebus, Nick G and 2 others 3 2 Link to comment Share on other sites More sharing options...
ParHunter Posted October 15 Share Posted October 15 This is still work in progress but I’ve designed a print in place foldable stock adaptor for my TAC41 LS. I still have to improve the lock in place as it is currently too easy to fold the stock accidentally. Any suggestion for a good locking mechanism? Currently it is done with small protrusion that locks into a little groove. Link to comment Share on other sites More sharing options...
ButcherBill Posted October 15 Share Posted October 15 Why not design in a locking machanism like the Para Fal has? Link to comment Share on other sites More sharing options...
ParHunter Posted October 16 Share Posted October 16 16 hours ago, ButcherBill said: Why not design in a locking machanism like the Para Fal has? I had to google that stock 😉 I was thinking of using a spring and a bolt to lock it in place but I am trying not to over-engineer it if possible. I will try with a 'latch' that snaps into place but that you can easily unhook (but still fixed enough not to get unlatched. ButcherBill 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted October 16 Share Posted October 16 3 minutes ago, ParHunter said: I was thinking of using a spring and a bolt to lock it in place but I am trying not to over-engineer it if possible. I will try with a 'latch' that snaps into place but that you can easily unhook (but still fixed enough not to get unlatched. 100% my point Link to comment Share on other sites More sharing options...
Sd96 Posted October 25 Share Posted October 25 On 11/10/2024 at 20:00, Jez_Armstrong said: No one made a B&T sliding stock for a K that was an AEG without spending £155 on the Bow version and cutting it to make fit, so I made my own Do you have more pics of this ? With stock extended Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now