SeniorSpaz87

I'm gonna be testing out/demoing the new Safariland 578 ProFit holsters at The Mall in mid to late April, so I'll be there then.

Alrighty then, not really just bout, but bought in the last week. Hope you guys like reading long lists... VSR 10 rail Barrel mount 20mm weaver rail Emerson LQE two point sling Insulated carryall ICU gun mirror system 30m black paracord 2x mini GoPro rail mounts M4 hand guard cap 10x inert .30 06 rounds Black rifle stock pouch G&P/Star/Madbull M4A1 (thanks to BigAl) 6x midcap PMags (thanks to BigAl) DBOYS 3 in 1 M203 UGL (thanks to Lozart) 2x ZCA 40mm gas grenades (thanks to Lozart) 2-6 x32 scope (thanks to rafal86) 3000 Blaster Devil .2g bbs Lower face mesh mask 144a Maintenance gas Coyote tan drop pouch TM enhanced recoil spring for G17 And now my debit card has in the range of £0.36 left in it... But still got £60 cash, so I'm not broke yet

May be rather costly though... I could do that monotone for around £10 (estimate), but to do the model in colour is a lot more difficult, not to mention the costs of a more complex machine than the two my school's DT department are, as well as the scanner itself...

Luke said it was probably that too much gunk had gathered at the front of the gearbox. Gunk at front = tighter seal, higher FPS. Gunk in middle = correct FPS. Gunk at back = lower FPS. Took apart its gearbox today, and indeed there was quite a bit of excess old grease in there, as I've never opened it up before. So cleaned it all out and regreased it, gonna have to see if it's lowered back to its usual 290 FPS next time I'm at The Mall in April for the Safariland 578 ProFit holster testing/demo I will be doing. However my hodgepodge G&P/Star/Madbull M4A1 from Al should come tomorrow, along with 6 midcap PMags, so I won't have to worry about failing guns for awhile... If I have to use an MP40 with one low cap again I might just have to go pistols only... I guess that will be a real test for the ProFits...

Well, I can maybe comfortably play at The Mall once my new gun gets here; every time I've gone I've had issues... None zed's fault, just weird things like my guns failing, or my P90 randomly jumping around 80 FPS on game day...

Yes! I own an iPhone 4, that thing was almost bulletproof... Not sure I'd take my 5s out there, but my 4? Heck yea.

i hit up The Mall and hopefully Epsom once exams are done and colleges are sorted out. gonna go to Richmond uni here, so gonna be somewhat near

Ahh, then Kurtz was on your team for most of it. During the briefings I often set my mp40 on one of the two wooden shelves at the front, so kinda near Luke (or whoever was giving the briefing), so I was always towards the front. Didn't see you though. Did you see the guy with the Halo assault rifle? Quite cool. Also, someone had a FLIR IPhone case that turned it into a thermal sight on his gun, might need to get one of those...

Was it (either the temperature of the room/outside or the gas or the mag) cold? Most common error is this. Try warming both the gas and mag (NOT ON A STOVE) by holding it under your armpit or something for 10-15 min, then try again. This happens to my G&G CM16 Raider a lot as well, and it's always been because it was cold.

I was green team, it was pretty obvious who I was, as I was the one using an MP40 . Kurtz was also there with his unique gun (can't remember what it was). He was one of the three personalities on the marker objective round.

Did you fill the stock, or weigh it down? The description recommends doing that. If you have done that, then remove everything you put inside, if you haven't, then try that. While you are doing that, I am sure someone who understands these more than I do will come along and know what to do.

Well, after action report is in. Raider using 122a gas dropped to around 320, so it would have been fine for The Mall. However, for whatever the gas kept venting out after the first shot; might have been because it was quite cold in there today; also, my gas bottle was low and Luke didn't have any gas in stock, so moved onto my secondary, my ACM P90. Ran into problem #2 with this one... Probably due to a grease buildup in the front of the gearbox, my P90 jumped 80 FPS, which is ridiculous. So I was awkwardly running around with an MP40 with one low cap mag for the day; got a few looks for it too . All in all, not bad once I found a gun I could use. Raider should work once I get more gas, and my MP40 held its own against guns with much more ammo, +1 to me possibly going to some WWII games someday...

Hmm, don't know why it double posted... Ignore the first one

This is my G&G Short Raider yall have heard so much about. Hopefully won't be too hot for The Mall tomorrow... Got a Rogers SuperStoc, Safariland torch, Safariland Single Point Harness & Adapter, some generic green laser sight with a pressure pad, a B&T tracer unit/silencer, and a short DBoys M203 on this gun. Also included is a pic of my gun bag with my primary, the Raider, as well as my secondaries; a WE P226 and G17. My backups there include two ACM guns, an MP40 (really going along to chronograph, won't use it) and a P90.

Umm, not sure, but this shouldn't be here, it should be in the gas problems section further down the home page

Alrighty then, since you are interested... Here's a post a made a bit ago about the ProFit: "Safariland is the best, and thats not only my opinion. To B's point, yes they are expensive, but that is due to all their ALS holsters being made for the military. However, Safariland's newest holster that was revealed at Shot 2015 is different. It doesnt use the standard ALS Sysem, but uses a trigger gaurd lock system. Also, one of its biggest selling points is that it is made to fit all but two modern handguns, SIG's new 320 and one other. I have been personally assured that it will fit all of my airsoft pistols that have moderatly accurate trigger gaurds. Also, as this is made for the public, it only will cost around $55, quite a bit less than other holsters of similar quality. Also, Bill Rogers himself said he would be willing to get into the Airsoft business, and as such we are keeping in touch. He is visiting in mid April, and is planning to bring over several of these 578s for me to use as demos, so I will be demoing them at The Mall around that time. Also, with enough support, I may be able to set up a Safariland and HolsterOps distributer here in the UK with him." I really only play in Reading, so I do not know if you would be able to come and see them, as I would be showing them at The Mall. I will probably keep one for myself (of course) and sell the others off. So people could maybe pick one up then. I can not gaur tee anything, though, as I don't know how many Mr Rogers will bring with him...

Remember, Safariland products won't fit WE G17s ATM. However, their new 578 Profit holster will. It's not out yet, but will be soon. I will have a few in April to demo with, if you could survive till then. The only reason I have a Safariland holster to fit mine is that Bill Rogers (inventor of the Kydex holster and inventor for Safariland) custom formed one for me and him

Hi

Yep, take everything apart bar that. Glad to see it's working for you now.

For GBB pistols, use high power green / ultra gas. Unless it's hot outside, then powerful gas can damage the gun. ICS MP5... I want one Glad you are liking you games, most people are friendly and trusting of newbies, so glad to hear you are feeling welcome. Oh, and welcome to the forum. *Note: Oh, and I have the same pistol If you ever have any issues with it, send me a message; I've stripped mine more times than I have fired it (OK, maybe not...)

Hmm, y'all may think this choice in music is a bit off, but whatever. Lindsey Stirling's Senbonzakura

Hmm, care to enlighten me?...

I have a feeling that this video will show you just how... How would I put this... Inventive(?) people can be when it comes to dressing up... That's right, two of those costumes are pretty extreme...

I fail to see the issue here... He looks to be over 18, and as he said, he's skirmished before using rentals... So how do we know he isn't registered?...