SeniorSpaz87

alright then. ive actually taken the little Kydex MOLLE holster bit and attached it to the back plate of my Safariland P226 holster, so nows it leg-mounted. its nice as I can holster it.

why that grip?

Ok, just bought a few things: S-Thunder metal 40mm grenade launcher 2x Eotech protectors 144a maintenance gas

OK, I have experience with both TM and WE gas mags. The TM may not actually be leaking, see this article: http://www.redwolfairsoft.com/redwolf/airsoft/ReviewDetail?reviewID=178 Basically, TM mags don't have a second o-ring that causes silent fills like WE mags do. So your mags may not actually be leaking. The WE mags it sounds like are getting too cold... My G&G CM 16 GBB does that when it's cold, try warming the mags up. Keep them in a warmer part of your house is good as well. When the gas gets too cold it doesn't have the same power as when it's warm, and this can cause the gas to not cycle the slide completely, leaving the gas port compressed, running the gas out.

Hmm, ok then... I also have a red one, so I guess I'll switch them out.

Hello guys, I have a green laser sight and a torch that both use pressure pads, which I love for ease of use. The only issue is that I am unsure how to attach them to my guns. The laser I attach to my GripPod, and the torch I will probably put on my pistol grip on my M4, as I use the light more than the laser. They do need to be removable, however, as I dont use them during woodland games, only CQB at The Mall. The attachment piece can stay on, just not the pressure pads. I uave heard of people using rubber grip covers and velcro before, so any ideas?

Great

Yea, I bought it cheap of Hef, still need to put a review up, he was great, and it enabled him to get his EBB (I think), so everyone was happy. He must have modded it then, but I like it. I'll look into the RVG

Wait... A real eotech or a replica?

Actually, my MP7 is the one with a rail instead of the folding grip, and it also has the flash hider made for the QD suppressor, which looks decent enough. Check out the loadouts section; I have a few photos of me running it up there.

Hmm cav, that's too bad. Anyway, all mine work now, I guess the o-rings were just dry or something, as leaving them overnight with 144a maintenance gas in them fixed the last mag up.

Feel free to open it up and check the screws

Yea, some barrel wobble is OK, I can do the same if the slide is back.

I don't think "Just because it hasn't been done, doesn't mean it shouldn't" applies here...

Well, now that my CQB loadout is almost complete, here are a few pics of me running my training course in my backyard. I wrote alot, so feel free to just skip to the pics. List of items: Guns: Tokyo Marui MP7A1 GBB ACM P90 AEG WE Gen. 4 G17 GBB Loadout: Rogers Shooting School Shirt (Black) Rogers Shooting School Gloves (Black) Rogers Shooting School Hat (Multicam) PROPPER Khaki Ripstop Pants Bridgestone socks Tan Belt Merrell MOAB Mid Waterproof boots (black) US MOLLE Coyote Tan Vest Coyote Tan P90 mag single pouch Coyote Tan M4 mag quad pouch Safariland ALS Glock 17 Leg Drop Holster (Left, Tan) Safariland Leg Drop Holster Platform (Right, Black) TMC MP7 Mount Accessories: TM MP7 40 rnd GBB mag x4 ACM P90 low cap 78 rnd mag x1 ACM P90 high cap 300 rnd mag x1 WE G17 low cap 24 rnd mag x2 WE G17 high cap 50 rnd mag x1 Rubber US SEALS knife + sheath Abbey mini gas Attachments: Rogers Rail light (MP7) B&T Tracer unit/silencer (P90) Safariland magwell (G17) Safariland Glock-grip (G17) Custom Tritium foresight (G17)

That was actually very well written, and if they feel the need to respond, they may be able to help sort you out.

Just wait for one of the addicts or mods to come along, they know all the ins and outs of UKARA, of which there are plenty.

Alrighty, this isn't really bought, more like gifted... Just confirmed the items Bill Rogers is going to bring over next week. Safariland ProFit Holster (right) Safariland ProFit Holster (left) Safariland pistol light Eotech MRDS Pressure pad for Safariland torch Safariland mag-grip Link to sight: http://www.eotechinc.com/holographic-weapon-sights/mini-red-dot-sight-mrds

Do you have a mate you could leave your guns with, come here, get your UKARA number, and then have him ship them here? Just a thought, more experienced people than me will come along soon and be able to give you better answers than that.

Cool handguard

I can imagine them coming up on someone who has taken disarmament courses and flips the gun on them... That would be funny

Yep, I've got a mixture of gas, from 144a to green gas all the way up to WE Nuprol black gas (not really sure why I bought it, thought it might make my 40mms work better). I'll be using it as my primary at my demo/testing of the Safariland 578 ProFit holsters (which I just confirmed the ones I want Bill Rogers to bring across the pond), so I'll have a better idea of its specs then. I will tell you; it's really fun to shoot. Did you get the one with the QD silencer and kydex mount, or just the gun?

Yes, I had. Reforming the o-ring worked on one, so now I've got three working mags, so 3 outta 4 ain't bad. I'll keep fiddling with the last one, but does anyone know where to get TM mp7 o-rings?

No, it's an immediate vent. I know about the 144a gas, got a can myself.

When it comes to gas mags, I've fixed plenty of GBB WE pistol mags. Turns out two aren't actually leaking; TM doesn't use a silent fill valve, so it seems like the mags are venting, but they aren't. But two ARE leaking, and I've tried rotating the o-rings 90 degrees, soaking them in warm water, and many coats of silicon grease. Overnight, I removed the two o-rings and put them over the back of a screwdriver to try to reform them to circle; I'll see how that does in a bit.