Sitting Duck

Daft question but it was the German review of the HC05 DSG Firehawk that were creaming their jeans over it... Which is really kinda weird considering it is full auto only Bloody Germans, wish they would make up their minds Only thing I can surmise is that a sub 300fps can be full auto but 350fps must be semi only coz they seem to have lower fps over there me thinks Dunno, programmable MOSFET set to single burst is easiest me thinks

yeah but I was gonna ask about a fake ukara license

yup, cheap m92 is about £14 with mag http://www.taiwangun.com/en/gas-guns/m92f-m9-vertical-heavy-weight-gas-pistol-stti?from=listing&campaign-id=19 plus shipping unless you spend say 99 Euro's or something.... £ to Euro is about 1:41 which means look at Euro's, do a 10th or 10% in ya head, knock 30% or 3/10 of Euro price = price in quids 35 Euro = £25 or there abouts

oh ohhh yeaaahhhh - now I see it - yup it is a scar ya right chaps jeez they moved grip up and stuff, dropped the ar$e off it yeah - now I see it properly - yuk but I was right about don't do drugs

scar ain't bullpup I did wonder if you went nutz this weekend as you got a 3d printer and a L85 but thought you was trying to wean yourself off the hard class A drugs and getting ya life back in order

WTF - bullpup, charging handle like a L85 me thinks somebody got a cheapy Army R85 went nutz with some 3d printer or did a Blue Peter washing up bottle sticky back plastic special (using round nose scissors or got a grown up to help) just thinking - how da fug do ya ads ? normally got a low point at rear/stock to get ya mush into it UAR has nowt to worry about Edit - is that the selector switch right at the back near where I presume the battery might go ??? oh yeah quick change from semi - to full auto - with what ya 3rd hand, teeth, or what ??? Listen kids - don't attempt to design or work on stuff after doing drugs - it very often doesn't work very well

it is not a license - just a database of saddo's playing with toy guns at pee pee peew sites tbh - read this first.... http://www.airsoft-forums.co.uk/index.php/topic/17294-ians-guide-to-noobism-on-a-tight-budget/ if you still want to buy a stfu gun for sniping then get a mofo hpa and crank up the fps if money is no real object leave a couple of quid for some cammo tape to cover up the 2-tone PolarStar, camp up, freeze ya nutz off, bored as f*ck, watching others run around screaming and shouting, laughing their ar$es off as everybody goes ar$e over tit in the mud, getting shot to $hit (some by their own f*ckwit team members), trying to go at quiet and stealthy sneaking round the back for a flank only to have a gobby team mate shout out "DO YA SEE ANYONE ?" soz - got totally owned yesterday but wtf still had fun During a little pep talk I announced: "Don't worry lads we ain't doing that badly - we are still second btw" Yeah we got slaughtered n covered in crap - but good fun all the same

signed coz its so true what is said above meant ian's post not teddy's ref to shirt lifters

Kids happy for 5 mins, missus trying to keep the peace, all going tits up, putting up with outlaws totally skint - unless Santa is gonna give me the New Year lotto numbers..... well I guess this may apply to me....

cheers - just ordered one myself - well actually two of them - couldn't decide on which colour to go for (think they also did some tailoring for an Emperor's new clothes)

buzzzz buzzzz buzzzz - busy little bee has beeeeeen busy clever stuff limited only by your own imagination - custom bespoke parts no problem for you how long does say a flash hider take to print and what are the "3d ink" costs ??

Sunday November 29th perhaps then ??? I'll have a check & quick think then dunno if it will still be around on Dec 13th & onwards evening games are out as I work shifts

motor connections - hmmm - maybe but depends what/where wires were wiggled very loose tamiya connections - or around fuse ? loose wire inside box/switch - hmm doubt it think any joins/connections should be checked first, could be a little corrosion on a loose connector/join is most likely normally a thin spade connector at front handguard is a good place to start might have pinched some wires in past so that could be next thing to look for folding stock so presume ya battery is up front - check for loose corroded joins & pinched wires also check motor connections in pistol grip - nothing too difficult just common sense and elimination

Holy f*ck !!!! Where are them tunnel rats gonna go now ??? Any idea when the last game might be coz I would like to get one last game in before it goes. OK they may not have chrono'd guns much but if ya got good protection - advise full face mask It really should be experienced Doubt if many places would come close to it, even other bunkers don't prepare you for such a full on pitch black fire fight down there. Similar thing happened to TWA urban site at Anerley/Crystal Palace Landlord wanted land back for development and 18 months later still not got a replacement urban site Was featured & rated as far away as US on YouTube Sad to see her go, them tunnels must hold a lot of stories even before little bb's started firing off into the darkness Maybe some good milsim sites around Kent plus Sandpitt or the Mall ????

a little revival - seen it on Gunfire which may work out £27 or there abouts... http://gunfire.pl/product-eng-1133729227-Replika-pistoletu-GG-102C.html people are quite pleased with this cheapo revolver - yes its cheapo crap but might worth an option if ya must have a revolver to complete ya loadout spare mags or rather lack of etc but all the same... £27 - if/when it goes tits up ya bin it as for cheap gin or expensive gin scenario.... if you are a connoisseur or enjoying a nice relaxing drink - yup go for the fine quality stuff if though your main intention is to get absolute rat ar$ed, totally out of your nut, dodgy curry/kebab and chuck most of everything all back up again later than evening - hmmm consider a more cost effective option perhaps ??? horses for courses - did say it was cheapo revolver but caught my eye anyway what ever floats ya boat n all that

I bought a while back one of these: http://www.ebay.co.uk/itm/AIRSOFT-AEG-8MM-FULL-GEARBOX-47-V3-VERSION-3-FRONT-WIRE-QD-APS-QUICK-RELEASE-AK-/272008716679?hash=item3f54fba187:g:ga0AAOSw4HVWFO0d NOW DO YOU THINK I CAN FIND THE F*CKER !!!!! Also bought a v2 box exact same type and 99% sure these used micro switches - short pull on/off but to use these micro switch boxes you MUST have a fet fitted coz micro switch don't last long on higher juice AK2M4 had some similar v2's with micro switches and sold the switches should they be needed but not sure if he stocked the v3's Now as was said in ya other post - the micro switch has a shorter pull indeed (still don't fully understand the cut off layout on semi with micro switches) So if I ever find this mofo bastid v3 from HelmetWorld - snigger soz Helmet World, I'll let ya know the difference Also I'm sure there was a 10 or 15% code knocking around, I had one but long expired Cheers hef: http://www.airsoft-forums.co.uk/index.php/topic/16634-the-share-a-bargain-thread/page-10#entry213297 Dunno if still valid but might be worth a shot yup it ain't cheap but not ultra expensive either - might get it for £55ish which ain't bad for a complete UK box especially with quick change spring on top But alas I can't help coz haven't come across it for a while now - too much other crap in this house of ours (it was placed somewhere safe - now too safe coz I can't friggin' find the thing) I know the v2 fitted in an old SRC M4 - big improvement, but was too hot with a m110 spring or something and just left it when I got G&G's RIF's but deffo very short trigger pull in that SRC but no fet was fitted (hmmm might dig that M4 out and start sorting it out to flog or something) hope some of this crap helps - probably not finally I take great offense to the ad's line: "MAY NEED A QUALIFIED TOY ENGINEER TO FIT" cheeky f*ckers - where do I get this TOY ENGINEER qualification then insulting that word - qualified pah I make this crap as I go - natural born bull$hitter me - fully qualified in that area for sure

Welcome m8, mega kudos for doing some research You can learn loads on ya own just by reading up This place is one of the best well rounded forums for us toy gun nutters I too have still so much to learn from them master mofo's All the very best

well going by this: http://guay2.com/web/manual/FFR_manual.pdf it seems it don't have a fet - so just posi & neg to check check neg tamiya connector to neg motor for continuity the check positive at tamiya to posi motor and pull switch - should get continuity if not then than may indicate trouble at switch inside box if she is under guarantee then you should look at contacting retailer before stripping her down further there is also the point to check to leads running from tamya to a join just by back of receiver in case the fuse looks ok but the fuse holder itself is iffy or wires have got caught or unplugged from the connections (unlikely but still worth checking any points on the loom) my gut feeling is that it could be switch related inside box, but quite shocked a new gun should fail so soon you ain't been forcing the trigger on semi if she was stuck in semi's dead zone or going nutz with 11.1v 40c lipo's I assume you have tried obvious and fired her on full auto and test for continuity on positive on full auto too but odd a new gun should fail like that as the good ol' G&G's are usually very robust I wonder if the triger switch stop pin has broke inside - but the trigger would feel a slightly bit lighter to pull if this has failed then it would be very very wise to contact dealer before you rip her open and void any warranty left

Hmmmm weird one coz not 101% sure if it has a fet or not to go pear shape (not up on the latest G&G's I'm afraid) http://guay2.com/web/gc_product/CM16_FFR_A2.php?lang=en does have a mosfet http://guay2.com/web/gc_product/FFR12.php?lang=en does not seem to have a mosfet in stock tube if its still under warranty and before you rip her open, talk to the dealer/place you bought it from is best advice if the motor connected to G&G FFR still doesn't spin out of grip or half out then something has blown on the wiring side or on the trigger switch side.... The fet could be blown (G&G fet's are the most robust ones in the past) but can't 101% sure if it has a mosfet yes you could run a few tests on wiring with a multimeter but what you are testing depends on fet or no fet in theory if fetted then it would have red/black plus at least one extra thin wire at rear of receiver - stock tube (doubt if G&G mounted a tiny internal fet), and you should see an extra block on wiring loom in the tube as well as fuse if it isn't fetted then you will just have red/black wires running to gearbox..... testing for any breaks on posi wire first - battery end to motor connection pull trigger and complete circuit or continuity should take place - if not switch is w@nked perhaps (was you running her nutz on 11.1v that might start to burn trigger contacts) or the trigger/switch mechanism may have failed - doubt if it is one of them super duper electronic mofo units or it would of said like on SR range also check negative wire too - but this would be switched if fetted the thin red signal wire should work fine testing for continuity on posi lead/trigger switch as I say - depending on if she is fetted or not but it seems she ain't fetted if I got model correct I'm trying to determine if the mosfet is blown - but if she ain't got one then it can't be that trying then to test if the trigger switch is borked either burnt out or a mechanical failure I would deffo look into contacting the retailer if at all possible first failing that then maybe ask somebody at ya site who maintains the rental guns so you can save on postage and be kept updated whats wrong etc.... sounds either wiring, mosfet module or mechanical inside the box if trigger switch failed but a few further tests would help narrow it down to what exactly went pear shape please contact retailer first is my best advice and use any warranty you might have if s/hand maybe ask ya site's techy guru mofo next soz I can't help ya more atm

Pull the motor slighty out of pistol and pull trigger Motor should spin, if not then perhaps fet blown if there is one fitted or other wire problem (Motor could be shot but unlikely) If motor spins the box has locked up Little process of illimination Ain't stuck in dead zone - will it fire on full auto Soz but had to ask???

answered pm but can't say as not got TM or any other P226 if any TM mofo's can chime in with stuff like how compatible other mags are and a proper rating of gun over time - but alas I know jack $hit on the higher end TM stuff soz I can't help much, but won't give out info on stuff I know complete jack $hit about m8

eh - just post on here any questions really. I know jack $hit really outside of my cheapo cheerful stuff and it always is good to await others replies on stuff and go with flow/majority/your gut feeling I like most on here are still learning so only take the crap I type with a pinch of salt I type and chat bollox a lot but that don't really mean I know a lot and always wise to get another opinion on anything yeah if you want to pm me about any real cheap crap - I'll give you my honest personal answer but posting on here will give other opinions and might help others with similar questions at same time plus I might get corrected from talking out my ar$e - so we both learn at same time

efficiency - suppose if ya that worried get a non-blowback or simply - don't use it so much yes TM are more plastic and they say they may be less prone to freezing but valves n stuff are still metal.... WE Glock 18 when used on full auto the mags come out freezing but still seem to work ok But not gone through a winter yet with it and as we are both down south we may not see ridiculous ultra sub zero temps like North Scotland (Basically - if its that friggin' cold I am staying in doors - big girls blouse I am) Really cold spells is where cyma AEP's come in handy, yes only 200fps but often you may find indoor cqb is more cosy to play so up close firefights 200fps ain't a bad thing I guess If I find my WE G18 plays up this winter I'll let ya know but as weather has been mild so far no probs - yet

dunno but if you place an order at airsoft gi you can choose the option to pay taxes upfront..... worth noting most stuff from US has a good chance of getting stopped/charged compared to Hong Kong having a good chance on small-medium parcels getting through without duty (depends on parcel size and a bit of luck but often modest stuff from HK gets through (slowly) ok) check out a similar sort of item on AirSoft GI site, do some calculations in basket and see what's the worst damage you might get hit for???

green gas - 300fps co2 - 450+ and won't be allowed (actually can be over 1,200fps on a fresh bulb for a few shots) "some" co2 guns can be used or tweaked to scrape under 330-350fps but green gas - can use propane so think Green Gas pistols are what most use I bought a co2 pistol and can't really use it = ornament for playing airsoft