-
Posts
4,894 -
Joined
-
Last visited
-
Days Won
76 -
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Sitting Duck
-
first you start off with lower volts and see what ya rof is at 25rps she may run on and double cycle on a m100 setup at 30rps you will get close to PE however 13:1 gears won't give you the full expected rof using a ferrite motor and short stroking often involves more work with a higher spring - m110 and also probably a new lighter piston 3 steel teeth & remove 1 or 2 as stock piston probably only has one steel tooth on it even though ics have split gearbox you would still need to strip the box down to mod the sector (yeah I know you will need to do that anyway if fitting 13:1 gears) personally if you just wanna go easy fit a moderate neodym like shs torque perhaps and check seals AoE etc should do ya proud without too much fuss and use a 8.4v perhaps Eventually if you wish then go nutz and fit mosfet gears n piston - but its a bit of work if its your first project (if not done correctly the box won't last very long trying to hit 25 to 30rps badly assembled)
-
G and G CM16 Raider Motor Replacement.
Sitting Duck replied to The Joke's topic in Guns, Gear & Loadouts
might be able to get a shs long torque for £30 miles better and won't rip a stock box to bits on mild jiuce could list others but really needs a major service before you start pushing it shs torque will be about 30% improvement so you can keep the volts low and still get good results (no silly 11.1v lipo - 7.4v or 8.4v nimah is ideal for stock gun + shs) edit small afterthought..... http://www.ak2m4.co.uk/internal-parts/motors-parts/zci-motor-high-torque-long give him a shout on here and he might sort ya out real proud -
clicked on link - saw ares starting to load up.... knew straight away the answer - G&G
-
Welcome - you are now an official registered saddo playing with toy guns you can check yourself out - ooh ergh, on the ukara self check database (though sometimes it ain't 101% perfect/up to date) my site took £10 I think but they automatically renewed it foc, even though my renewal wasn't due for another month n half makes buying more toys so much easier n simple and ya never forget ya first RIF - ahhh bless Rihanna
-
The 'What have you just bought' Thread
Sitting Duck replied to Cameron364's topic in Guns, Gear & Loadouts
credit card/bank - how did ya pay, paypal again - if they took paypal on their site I'd have a new spending place -
Gun makes clicking noise when pulling trigger
Sitting Duck replied to Gatman55's topic in Electric Guns
switch to auto and fire gun then it should cycle it is in its dead spot perhaps and trigger switch mechanism can't re-latch (releasing trigger too soon on semi is main reason) if not then it sounds worse like spring broke inside, or the switch stop snapped off (unlikely) it sounds daft but does it "feel" correct or not - DO NOT FORCE IT if it was simply just stuck in "dead zone" and you force it it may/will bust something -
The 'What have you just bought' Thread
Sitting Duck replied to Cameron364's topic in Guns, Gear & Loadouts
OK Who has been running VIAGRA in their gun still as long as gun and owner are happy that is what counts -
Damn it might have to buy it just coz it looks so cheap n crap I mean £30 - jeez I don't want people thinking my toy gun is ergh - a toy gun ? ahh what the heck might fall to bits pile of junk give it to some cosplay person..... Actually I think I got a weird uncle into cross dressing but he was told that type of acting don't work as a valid defense trying buy a RIF
-
The Dan Wesson's are Co2 and can be a bit hot or a bit weak @ 250fps if the downgrade shells are used No I have not got one of these £100 Revolvers - just read some stuff on PatrolBase Most other co2 pistols are way too hot to use - often sites say no or wanna see it on a fresh bulb as it can hit 500fps+ for a few shots before coming down to about 420fps aprox.... £30 - could be worth a look if you like a Dirty Harry or Cowboy loadout SRC aeg's are not so brilliant in general but their pistols badged as SRC or Stti or HFC etc... are pretty good cheapy pistols dunno anything more about it how fantastic or crap it is - but at £30 it just caught my eye if ya feeling lucky... Go ahead - make my Ipod - brill vid
-
Jeeez I said " 5fps if that " at the beginning and advised to get spring downgraded anyway I have found a few fps may be knocked off the final figure with a spongey spring suppressor type Not a lot at all but might just keep marshals happy at chrono if gun is right on the borders That is what I personally have found - not much but on them hollow spongey suppressors it did drop a couple or 3 (well it deffo seemed to be slightly less dues to a small final distance from barrel & chrono) The above is a minor example of a suppressor perhaps with a 10 to 15mm internal tube as opposed to the 6mm barrel..... BUT lets not forget the Socom-MK23 GG pistol and there is a stubby m4 aeg I saw on evike that had an extension type suppressor http://www.evike.com/products/49138/ BOTH of these guns's fps actually INCREASE when the suppressor/extension was fitted Though these are more like barrel extensions than suppressors tbh I don't really care about science or wtf you might call it but all I will say: They "can" change - the final fps usually in most cases the difference is so tiny it won't notice unless you are close to site's limit and it may appear to make no real difference what so ever too but then that depends on the suppressor or type of suppressor used PEACE FFS
-
eh ??? negative runs to motor posi runs to switch and then other switch terminal runs to motor as per all stock setups negative running to switch - then motor, extra wire - completely new to me ??? bloomin' sure the cheapo R85 clone has just the normal switch setup as above only odd thing it has is the AR latch release in the magwell coz it tries to pre-cock the long stroke (often it can play up and people use a normal sector with piston spacer or a sr25 sector (A&K)) got a pic or link to this weird wiring crap ?? just had a looksey about - the G&G with bronzey bushings - wiring goes round the back/lower half of gearbox Where as the Army Armament R85 6mm bushings - wiring goes round the top or right side of gearbox casing If it looks like a negative lead goes to switch - it don't in the pics I've seen, might look like it but it just passes by the switch and goes to motor untouched. well that is what it seems to me in 2 close up pics of the genuine G&G box
-
least fitting a fet is all external - just like v3 boxes none of that opening up box to rewire like v2's
-
basic should be fine as it is a 19 teeth piston as opposed to a normal 16 teeth piston plus think gears are about 21:1 in them longer boxes - so doubt very much if double cycle ever They are either v6 or v7 gears so it is very hard to source higher speed gears for L85 or R85's though somebody on Airsoft Mechanics got it running quicker trigger response using the spur gear from an expensive Riot/Seigtek v6/7 gear set I remember reading 6 months or so ago - jeez no thanks and a 19 tooth sr-25 sector to get around the hit n miss R85 pre-cocking problem (ffs - lot of work but was nutz about trigger response)
-
if you want a good small cheap non-ab fet: http://www.firestormsystems.com/shop/electronics/mosfet-switch.html has thermal cut out - lots of wire and for £10 it is a bargain - highly recomended (yes you can knock ya own 3034 but for peeps needing just 1 or 2 basic fets - why bother) was out of stock a couple of weeks back so if you are thinking about it - don't hang around I'm sure that tiny thing can go almost anywhere in the G&G L85 or Army R85 clone
-
Ahhh but the world owes a lot to Chuck Norris: And yes this thread is derailed and heading over the cliff - but wtf its pretty quiet lately and it was doomed the moment I started to type the topic - so go nutz & be happy
-
Absolute brilliance Chuck Norris fears Clint Eastwood etc..... Bruce Lee - mega bad ass only guy who kicked chuck's ar$e fittest man in world etc.... - killed by asprin or a smidge of cocaine brandon to follow in his foosteps - yeah brown bread too (somebody put a curse or something on them Lee boyz) But all them pi$$ takes - funny as hell all the same cheers for vid - very well done I might add oh and Clint wants a word about nicking his quote:
-
Well its probably crap SRC / Stti but wtf it caught my cheapskate eye https://bbguns4less.co.uk/products/src-gas-revolver-gg-102c-in-silver.html?utm_source=BBGuns4less+Offers+%26+New+Products&utm_campaign=ec641cb4bc-RSS_EMAIL_CAMPAIGN+FOR+BBGUNS4LESS-2&utm_medium=email&utm_term=0_8b81bde768-ec641cb4bc-60808125 Not ya Danny boy Wesson but cheap as f*ck for all ya pistol packing mofo's I went looking for funny clint pics and some of the Clint Vs Chuck Norris Vs Bruce Lee stuff made me fall off my chair decided on Dirty Harry pic instead - but some of that stuff brightened up my day
-
Motor polarity back to front Piston slipped off rails Don't worry my first couple of box openings did not go according to plan (Massive understatement BTW) The trigger AR latch mofo bastid mofo etc.... And if it was SRC you have my deepest sympathy Their gears especially sector is $hit Local techy or somebody who maintains ya site's rental guns is another option Best of luck
-
Dunno about G&G's but JG's have "made in china" on bottom of pistol grip G&G's normally have G&G Armament in a few places on the guns - well M4's do (and SRC, ICS & G&G are made in Taiwan btw) could be a loose motor connector - holding it upside down contacts the loose motor terminal or something - still dodgy for shorting out a pic might help to suss out make and that would help in checking out the exact same gun tear down vid on youtube etc....
-
Take a pic, or two of gun. Long story but some trigger switches have a copper plate on selector plate which must touch back of switch unit to complete circuit... JG don't have this on G36's Not 101% sure if cyma G36's have this ultra safe safety feature that can fail. But a cm515 M4 does. SRC M4's also have this and it must contact the switch. Probably ain't this but it is one part of circuit that "can" fail or be an iffy connection, etc.... Not being funny but I doubt if it is a JBBG one but if it was we would probably say no f*cking chance If it is an Ares or Umarex it should have trades So it could be a JG, Cyma, SRC maybe.... But you say in sig you have G&G. Heck it could be an ICS. Is there a screw underneath pistol grip ?? Could have TM or ICS on it or some thing.... If it is a certain length then not all makes do longer G36 So a PIC may help in more ways than you think
-
stop firing or stop feeding ? if intermitent firing - then its probably electrical, dirty switch/motor contacts/brushes could be locking up - no offense sometimes people's first description is a bit off hence some guesses also are a bit off too.... could be selector switch mechanism or cut off lever too - is the switch/trigger getting stuck or feel different to pull (there is a "dead-zone" on the firing cycle sometimes) if you can take some pics and upload to imgur etc.... (there is a sticky how to do this on here btw, how to upload pics etc....) if we can guess the make then somebody might be able to chime in with some possible known qwirks on that gun
-
Decent pistol to get me started
Sitting Duck replied to haroldiniho's topic in Guns, Gear & Loadouts
son has we G18 I got m92 - ya fill with gas n bb's - pull trigger, bb's come out dunno about blowback one - but wtf £35 !!! -
Decent pistol to get me started
Sitting Duck replied to haroldiniho's topic in Guns, Gear & Loadouts
LWA is where my son got his WE G18 Euro auto mofo from @ about £90 slightly cheaper mags from TaiwanGun (gen WE ones) end of day you can get a cheapy blowback for like £35 I've just seen http://www.taiwangun.com/en/gas-guns/g23-heavy-weight-auto-back-gas-pistol-replica-kjw?from=listing&campaign-id=19 or as a mentally cheap n cheerful non blowback at £15ish: http://www.taiwangun.com/en/gas-guns/m92f-m9-vertical-heavy-weight-gas-pistol-stti?from=listing&campaign-id=19 (cheap mags too) any cheaper and they will be falling out of ya cornflakes boxes - probably breaking the bowl in the process soz for spoonfeeding but just saw that £35 gbb one and thought wow that is bloomin' cheap enough to bin if it goes tits up -
thinking of getting some patches: http://www.militaryinsurplus.co.uk/Custom-Patches/I-39-m-Loving-It/prod_661.html
-
Need first AEG for around £100
Sitting Duck replied to TheUberMedic's topic in New Players & Arrivals
http://www.airsoftworld.net/umarex-branded-ares-h-k-g36c-sport-line-airsoft-assault-rifle-two-tone.html they were £70 at LWA a few months back, being Ares a little bit of caution required perhaps http://www.landwarriorairsoft.com/airsoft-weapons-c38/electric-rifles-c45/umarex-heckler-koch-s-t-g36c-sportsline-two-tone-clearance-special-p4496 but alas they are long gone if you like a fixa uppa and want a challenge: https://bbguns4less.co.uk/products/broken-umarex-h-k-g36c-sportsline-aeg-pro-replica-in-blue.html (hmmm - think I'll pass) best bet would be a JG G36c 608 mofo but need to splash a bit more cash for a good 2-tone model just avoid sites with BB's in their title (they tell ya lies and sell ya crap usually) yes I know I linked one in the broken gun offer but just demonstrating a cheapo option though being Ares/Umarex I think I'll keep looking for a JG