Davegolf

You really need to check your Recoil spring is good, when you say 1500 rounds, is that from new? But really a stiffer Recoil spring, or a HSB spacer in combination with the standard (healthy) spring Also worth checking for any sharps or randoms inside the buffer tube.

Wow! What Gas you been using and how many rounds has that gun fired?

@Seth_Erebor new CQB!!?? What, where, is it going to be bigger than a postage stamp and have proper buildings?

That looks smart for sure, I think I'd get annoyed with things hooking up on that stock in the field tho. And completely null for us softers but you'll need a much longer gas tube / gas block way down the barrel

oh dear

There is a wealth of knowledge on YouTube on these issues, I can't remember the guys name / channel but I'm sure @Wo1f will Leave spring standard.

I would definitely be looking at the nozzle / BCG closely

Check you floating valve isn't stuck closed, this would cause the bolt to cycle back without firing the BB out the barrel and reload the next BB, subsequently pushing BBs out

Ive got a lot of that in the last 24hrs

If anyone is selling a KWA Vector... I want one, PM me thanks I think that paint looks cool!

TBH I had a K2 and the Ergo is better IMO, yes GBBR and RS fit the MWS, I have a RS Ergo on currently.

@Apex06 if youre into milsim / and or you play with concealment then yes id paint it for sure, function over form. @Whisky1 the Ergo grip is nice for sure, it can feel narrow without gloves but the angle and contours are spot on

If you've been playing with the mag I'd say you've disturbed the BB follower and mechanism that pops up when empty. Thats if the problem is specific to 1 mag only

I think what @bapexxx means is; Set hop adjustment to minimum before removing barrel When refitting and tightening the barrel nut make sure that the hop lever arm moves freely as the barrel nut can push the hop lever to the side causing it to jam / not adjust freely

Oh way cool then, one day! (I will get my license) Yoi certainly don't need the Super Nub for range purposes but you will still benefit from the tighter grouping it gives, especially left/right flight deviation.

If you get some good footage of MWS IPSC put it up - ps no music and good gas blow back sound! ?

Lots of variables but the difference can be upto double the amount of shots depending on how much tube you cut off, how fast you spam the trigger or full auto. As above it is most definitely worth doing, it's a mod that you're stupid if you don't do it really. Just halve the length of the tube, don't fully remove it.

The exposed exposed length of tube is 90mm, cut 45 off the top. Job done best of both worlds. Functions as per standard, just faster. That depends on your general mechanical skill level. Its pretty easy to do, can be a tad fiddly is all.

Same old same old, I think a potato waffle type patch will be ace. All a BB ultimately wants is a contact area the same profile as itself - so it centres and it gets good bit of friction.

Have you increased the gas capacity of your mags? AKA green gas mod. Yes high power gas and reduced output nozzle gives the best of both. A high speed buffer also reduces cycle time without affecting mag empty bolt catch.

You could simply try lower power gas, or shoot in the shade ?

You gotta love a UGL

GBB guns mash up BIOs usually

Gas is stored in a liquid state. The tube limits the amount of liquid to leave space for gas, which is what you fire the BB with, firing with liquid doesn't work too well! By all means shorten the tube - but leave the tube longer than the fill valve, you'll have increased capacity and retain shot consistency

2.8j!!!