Davegolf

Same path, i ended up on a G36C. The TM Recoil has a very nice trigger for a mechanical V3 Is very balanced and pointy to drive. Another great gun (gnu) i dont personally own but have worked on and recomended to many is the G&G MP5, the top tier blow back variant.

The MWS has quite a large cutout compared to most GBBs Thats why most MWS compatible inner barrels are advertised as such. Obv AEG won't fit as they do not have a cutout, but a window.

@Arassuil nice, not enough FSP rails in use!

Thats a pretty high comendation then! Thanks! Waiting on an FDE MRO cover, the Pico AAB arrived today 👍

Legolas! 😂 Yeh if only!! Just need 600 yrs of Elvish experience and insane senses

So freakin cool, I think they def need to be classified as sniper / 500 / med."

A suppressor does work for sure. The quietest setup I found was; 330fps UAC light bolt Suppressor HSB As @P4radox said, a lot of noise comes from the blowback/Recoil. This is reduced when there is less work (gas pressure) required to cycle the bolt. You are also making the whole cycle faster so harder to locate. I have actually engaged many enemies under 30M like that. Time between shots, and shooting when other noises happen elsewhere to cover your report are good practice too Also worthy of note, I find heavier BBs leave quieter! 🤷🏽‍♂️

Youll just have to wind the power down, it's a big advantage the joule creep, and if your engagements are mostly 50+M then you want 0.36s in that. Good thing is your vertical deviation is a misnomer. At 60M even a light breeze will curl a BB of course. Also trigger discipline is a big thing. 😉

You need to rule out wind for sure. And note if they are generally curving vertically up/down or laterally left/right

@GothicGhost i bet thats actually quite effective camo in use! Finally got around to assembling the G36C, on the whole very happy with the build, although i think im going to have to swap the X-ASR for a Pico AAB, the internal rollback noise of the gears to the anti reversal latch drives me mad on semi!! Of all the colours i feel the FDE on the mags is the least effective, its too bright i feel, ive got some good ol' Humbrol Dark brown (FDE) aerosol which il prop spritz them with as its such an awesome FDE in use. The whole layout of the gun colouring was to blend with myself / Pencott Greenzone at the rear of the gun, and wrapping the gun around trees/fortifications/dirt etc at the front end.

Youll get your christmas prezzy in that 😂

It is funny how many of us have unknowingly spoken to each other... maybe for the best 🤣

Where from? So you are correcting the AOE on your BASR!? 🤪

OH MY GOD! Someone is selling an MWS! 😱

Genuine bargain for someone! https://airsoft-forums.uk/classifieds/item/11299-tokyo-marui-recoil-scar-h-upgraded/

The MWS is as we know an efficient design, as such it does not need a lot of lubrication. Unlike crap GBB designs where there is a lot of excess venting / gas blowby which dries out the BBU/piston seal. This is the reason lots of people run these on propane with great success. Mags always need to have pressure inside to maintain seal function / lubrication. As for servicing of mags - if they are leaking - strip them down, clean them out, check seals for damage and bloating, check all seal mating faces for scratches or debris. Coat the seals in quality silicone oil and reassemble. PTFE is not required / advised. Gas the mag up like 50% and check for leaks. Silicone grease the piston seal, everything else should be dry, or metal on metal lubricated (Wurth dry grease or gun oil) If you are not using the gun for a while then had the mags with suspended oil gas.

Never had an issue with Super Precision Geoff's. TBH we should all be using BIOs

If you can hop 0.3s then 0.32s shouldn't be an issue. I mean if I made BBs I'd go up in 0.06 steps, any less than that is marginal

Hello and welcome! So you are happy with your gun as it is? You are happy with your guns power? You are not allowed full auto. So your goal is to increase cycle speed, and reduce recoil? I can only comment on personal experience - a UAC Aluminium bolt with HSB Spacer will make for a very fast cycle. You may need to unscrew your buffer tube 1 or 2 turns to make the bolt catch reliable.

The risks involved with running? 😁 Well happy with the little PPQ i got of late for the smae purpose - just waiting on some brass rod to arrive so i can mod all the gas fill valves to hopefully sort the one problem with it.

What is the prospective pewpew?

General consensus was the new #2 mags are better than the #1. If you read back in this thread and other outside findings. Are you sure you are filling them correctly??

Covid has been spendy 🤗 I mean if a little GHK AK74SU snuck in my gaff I would not treat it unkindly 😝

So true @osteoshot 😂 TM MP7 GBBs creeping into your house is a great honour, and it signifies a homeowner in need of some frustration outlet, of which it provides in the form of compact BB violence.