Davegolf

Oh yeh this is old, he's showing where he's filed part of the trigger mech for a less stiff / notchy pull and reset. I made a very nice drop in replacement trigger bar that made the trigger lovely with a dream reset, but I couldn't make it cheaply enough yet for you guys. one day! Be great to do a Happy Meal style 'tune your MWS' goody box eventually! I need to get another personal MWS, it's just not right without one ?

To tighten groupings; A HSB spacer will tighten up FPS (and therefore shot accuracy) consistency. Bucking clean and dry, all seals good, nozzle and nozzle spring healthy. Mag gas exits in good condition. All that will also alter FPS consistency. To increase range and tighten groupings; If you're nearing 330 FPS or more 0.36s will fly nicely. Higher FPS with heavier ammo again. Otherwise your looking at a higher quality barrel and Rhop

Hi, just stick to a TM bucking, the only time you may notice a Modify is better is in low temps, the softer more silicone like rubber is more compliant and grippy than a TM. This is the same reason why they dont last as long, especially with higher FPS / temps / gas pressure.

Haha @Wild Weasel thinks he's an operator ? Basic fault finding, if the problem is with all the mags then I very much doubt it's the mags at fault ? Take a base plate off one mag, leave the fill valve in and try it on your adapters, how much gas/liquid comes out?

You probably would get higher capacity again but at the detriment on FPS consistency, and when you can get that many shots from a #2 mag why bother messing about with it ??‍♂️

The Glock master has spoken, saw that flow chart and you know... I'm sure it's like a prayer to you @rocketdogbert when someone mentions Glock - you hear it from within ? Which is physically larger, the P80 'looks' bigger than the KP13?

Niiiice ? I see you like a stipple too ? I love a Glock but I find the trigger guard a little small for me, any suggestions?

Cmon then @E21A I wanna see your big pile of Glock ?

Are you a Glock hoarder or just generally?

This thread just keeps on giving ?

Have you stripped the valve? it be crudded up or the O ring swollen / ripped / jammed

Lees Precision Engineering make O ring overhaul kits, best sticking with the TM parts ?

Hang on... 470 on 0.34! Doesnt that equate to over 600 on 0.2 or is my weekend maths off!? What have they done to the nozzle!? Does it cycle properly on full auto? Sure this isn't some hella late April fool!? ?

Ambi fire selector, nice ?

Fire from folded inside your vehicle when you arrive at a skirmish ?

Yes I appreciate the mechanics of a real one, but AFAIK there's nothing off the shelf, it could be done custom though at cost.

That's never going to work as Recoil buffer spring lives in stock tube! Real folding ARs have a special bolt assy.

Nice, firing DMR fps?

All legit mag pouches work fine as they are made to carry real weighted mags not plastic mags...full of plastic balls Esstac are great for open/quick access/reliable retention. Equal to HSGI, although TACOs can hold a variety of mags, and release with less of a tug, however Esstac can be easier to reinsert a mag due to them staying open - I mean TACOs close up some when empty. I prefer Esstac and Tacos on a rig. That said WAS pouches with bungee retention tops are super fast, have zero drag and less bulk. With belts you don't want to have to pull the mag hard to release. Hope you've got a Velcro inner / rigger outer belt combo, 4 mags on your hips is going to move around a lot otherwise! PS I've got a ton of WAS Coyote pouches I need to shift.

More heat, reciever in vice, very sturdy spanner. Youll want to remove the ejection port cover so as to reduce chance of damaging it with heat, or marking it in the vice.

@Cipher-032 I've used the Dynamic Precision one before without any issues. Not intentionally, it came with one other the many MWS ive bought. The standard TM seal does great, whatever you use keep all your BCG seals lubed up with silicone grease ? Also RE nozzle return springs, I think the life of the springs is affected heavily by these factors; 1. Hop bucking used; some hop rubbers grip the nozzle to tightly putting excess stress on the spring being held fully extended for longer with each shot cycle 2. High power gas relative to ambient temp causing the spring to be extended to full length extremely quickly.

I made a steel pin spanner as even some 'real' spanners are a bit cheesey. You definitely need heat, and you definitely need to hold the upper reciever in a vice with soft jaws.

Apologies thought you'd posted that up previous, hopefully they are made from a less fragile material too

Had quite a few Modify Tan failures now, the material seems to tear easily. @Whisky1 you only mentioned the Mod X to be accurate at 35M so far, has this improved? Standard TM with Super Nub give effective 50M+ The Mod tan with Super Nub improved on that effective range by giving slightly better gas consistency, so better shot placement consistency on the vertical plane.

@Asomodai you saying you wouldn't pick @Albiscuit for a ride if you had the choice? Bad company, bad car?? ?