Hatchet

Same as every other bolt gun tbh. The only issue with the SRS is how much more exposed the bolt is to crap and how rapidly it therefore generates crunchy grit paste. At least it's easy to take out and clean.

Yes (source, was the first gun I bought, 23 years ago). There's a couple of ways of doing it, and there used to be a good guide here but it seems to be down at the moment. I have saved some pictures though. Or you can do it the lazy way below

From memory, they can be a bit loose, but it doesn't really matter, as long as they're engaging properly. It's just a question of striking the balance between trigger responsiveness and accidental actuation. I have found the easiest way to adjust it is to build the gearbox in gun, etc and then take the rear lower stock pin out. This usually allows you to pivot the pistol grip/trigger mech from the front pin and adjust until you're happy with it, by bending arm/moving the trigger grubscrew in and out. The advantage to doing it this way is that you can hear/feel the microswitch actuating (make sure the battery is out before you start all this!) if you've done it too tight. I also find it worth backing off just a little anyway, because there can be a bit of flex in the fittings and if you've got it adjusted too finely you can end up firing when you lift the gun using just the pistol grip, because the weight pushes the pistol grip/trigger assembly up into the main body just a hair.

Probably just a case of backing off the grub screw on the trigger a bit, or cutting down/bending the microswitch arm, if you haven't already done that (because the unadjusted ones seem to inevitably get sucked into the gears at some point and make it into a runaway gun).

Have a look at the pic here. May be helpful. Edited - Actually, probably not helpful if you're talking about wiring to the microswitch, because I don't have a picture of that. I think from memory that's just the bottom two contacts to wire to, but may vary depending on your switch. Fairly easy to test...

Yes, runs fine on the Gen 4 mags.

Okay, but *apart* from the recoil shocks, magnetic fire control in the MP5, MWS system, gas AK's, gas semi auto saiga, new pistols, electric shotguns, recoil MK46, sanitation, medicine, education, wine, public order, irrigation, roads, the fresh water system and public health, what have the Romans ever done for us? Yes, this isn't a new gun. It's a refresh. Plenty of other threads people say "JG/CYMA have mosfets and Marui don't". Marui refresh to bring them in and then "They're not innovating"? Combined with "I'll wait for the clone to come out" seems hard for them to win.

Add this to the list of "Phrases you don't want to hear in Airsoft"...

Looks like Marui are giving the minor update treatment to the G36c now. Mosfet, different sights and allegedly better finish (although I suspect it'll be the same as the recoil ones, but I could be wrong). https://www.tokyo-marui.co.jp/products/electric/standard/512

Did not play as I had non-airsoft plans (surely not!) and was mildly annoyed that the first sunny day is the one that I'm not free. Then remembered that my leg is buggered anyway so it would have made no difference. The Ghillie discussion is probably one for another topic, since there's bound to be quite a lot of opinion on it. I have to say I'd be in favour of fewer of them and this comes purely from personal gameplay observations. 1 - Many ghillies with HPA M4's where you can no longer see or hear your opponent can lead to an awful lot of stalemates where nobody can advance (depending on the site layout/games). Like many things, it's hilarious when *you're* lying invisibly in a bush silently murdering everyone, but gets a lot less entertaining when everyone's doing it. 2 - Hit taking. Normally when having issues with hit taking the standard process is "This player, wearing this camo, with this rig and this type of helmet, using this gun - I believe was not taking his hits". This now becomes "Someone in a ghillie", which makes it a lot harder to resolve issues when there's 10 of them. But, we'll see how it plays out. Probably still plenty of sites there that don't mind you doing it whilst you wear your armbands on your feet, etc. if that's your thing.

Same with the bipod. Most of the time they're just dead weight and you're better off bracing against an arm/leg/tree, etc. Particularly with VSR, adding a bipod is probably going to near double the weight anyway (okay, a slight exaggeration, but then again I've got this Parker-Hale bipod that probably makes that an accurate statement) Usually bipods end up just being used to stand the gun in the safe zone on rather than shoot from, unless you're talking something particularly heavy (support weapon, EBR-14, etc). However, if you're determined to have one, I'd suggest something like a Harris - I'm sure there are plenty of clones but I've not used them. They're lightweight and quick to deploy with spring loaded legs and usually the ability to cant to one side or other to keep the rifle level.

You've also got UCAP GreenOps within an hour of you that is pretty easy to get to and well run.

I've got HSGI tacos in both pistol and extended pistol and both work, although the extended give you more coverage unsurprisingly. A lot of it can come down to play style and what other guns and rigs you run. You haven't mentioned if this is for belt or chest/plate carrier or both. For example, HSGI do a taco that's rifle+pistol, so if you often run an M4 but also have occasional MP5 you can use it for either. Alternatively if it's a more dedicated mp5 plate carrying rig, you might want all 4 to be quick draw across the chest (although I find this awkward with long mags and prefer a belt draw). You generally don't *need* more than one or two of the tacos in my view. I have a couple on the belt since I tend to quick reload from those and then top them up from additional closed pouches on a chest rig in a lull.

My Worthing review is probably going to be *fractionally* shorter than @Impulse's. Got to Worthing, car park vaguely swamp like, but passable. Some hilarious sliding on mud/parking attempts observed. Chronoed and tested weapons. Glock 17 Gen 5 is a beast and hitting 50m on the range without issues. Had done some tweaking, building and improvement to P* engine'd M4 so needless to say that decided it wasn't going to work and I ran the NGRS MP5 instead. Considering throwing all HPA kit in the sea at this point (where ironically it would probably be more useful). Glorious sunshine for pretty much the whole day, without being too hot. Perfect airsoft weather really. First game much as described earlier. Standing waiting for rentals to accomplish something before charging off to do... something. There were 2 objective props somewhere out in the game field and they had instructions on what to do with them on them. I say this, because I heard it, but I never saw any sign of them or knew what the brief was. Through I don't mind the clock concept because it can allow for waves of attackers/reinforcements, I think it would be better with some whiteboards with the objectives written on them once known. Yes, you can potentially wander off and try and find a marshall (who will probably be standing in the middle of a firefight) to find out what's going on, but large objective games lead to all the players being scattered without any cohesion. I got into some good shootouts and snuck around a bit, but I didn't really know where I was going other than all the usual spots that people fight over. This game lasted basically the whole morning. The other suggestion around clocks is to have multiple spawn locations, because it makes it more of a 360 battle when you know you could have someone spawning in behind you in 10 mins, as well as give you the opportunity to respawn somewhere else if things are not working where you are. Can work, might be situational though. After lunch, a couple of matches of capture and hold base, fighting over 3 different locations. I was pleased to snatch victory from the jaws of defeat with 8 seconds to go at the end of one of them by charging into the position. Reran it with different spawns and we lost that one 2 -1, so overall 1 match each. Plenty of movement and shooting, and clear objectives so it flowed ok. To finish the day off, it was attack/defend the tower with 1 life only for defenders, semi only for all. I opted to go up into the tower and shoot from there and am pleased to report there was some serious murder going on. Red dot sight paired with the accuracy of the MP5 mean there was a lot of rapid semi only kills on the first shot. There was also a Marshal up top, so they got to witness it all. I think we held out for 11-13 mins. Then the reversal and we somehow smashed in a new course record of under 2:30mins I believe. Then home for tea and medals. MP5 ran well all day. The low caps are consistently reliable feeders and .28's seem to work well in it. I did used to get feeding problems with the high caps, but the lows are good. Glock had its first outing and its first kills. Nice piece of kit. I am already suffering from everything hurting, but overall a good day out.

Hard to say for sure, but it doesn't look like an allen key bolt, more like a roller pin. Probably needs a punch (or screwdriver) and a hammer to tap it out. For future reference, you might be better putting this in Technical Advice > Electric Guns.

What's the deal with the sights? Do they require different slide, or are they a drop in fit on the stock gun? Link?

These HPA rigs are really starting to get out of hand...

Having had a quick shoot with this back to back against the Gen 4, everything just feels a little tighter on the 5th Gen. How much of that is down to it being brand new is a fair question, but the 4th Gen has only been gamed about 5 or 6 times. Trigger feels better, racking is more positive. Blowback feels different but it's hard to put my finger on exactly how. It feels slightly stronger but like the slide doesn't travel as far (which clearly can't be the case, but...). The grey slight two tone effect looks good as does the curvature of the front end. The mags also have a baseplate that is more rounded and have returned to having the gas nozzle covered by the baseplate rather than exposed. The inside of the front outer barrel has more visible rifling too. My Surefire x300 is a lot tighter fit so perhaps very slight dimensional changes, but it all still fits in the holster fine. Looking forward to an improvement in the weather and a chance to use it in game.

I went into a shop and... accidentally a TM Gen 5 Glock. I blame @JimFromHorsham.

I tend to just pick up a bottle of propane (400g) for about £15 from screwfix as it's just down the road. If I forget/run out it tends to be more expensive for less on site. Marginally less faff though. You pays your money...

Literally just finished watching their Facebook feed and had a similar "oooh, interesting" response. Technically probably identical to the AR15 version (perhaps bigger mags?), but would at least add some variety. At least some time to start saving...

Is the motor wired up the right way round? If you've got it wired wrong it'll try to spin backwards and the ARL will stop the gears turning. This might also be the case if you're using a battery with a tamiya connector since the wiring on them is sometimes odd - double check.

Depends why you want it really. They're great for turning over any spring, getting the most out of batteries, etc. I've not had any issues running 27k on 7.4v, but depends how many RPS you "need". The only point worth noting (other than worrying about soldering wires onto an expensive motor so it'll go in an AUG), is that there are lots of options for making a slow motor faster (16:1, 13:1. 12:1 gears, which this will have no problem turning over) or 11.1v batteries, but there aren't as many at slowing down one that's too fast...

Have been eyeing these myself, despite having a Gen 4. Hyperdouraku did a decent write up. Apparently 20% more gas capacity due to new magazines with different internals (not just orange follower) as well as a stronger kick from redesigned BBU. Video with more details and test firing too. Machsaki has done a couple of reviews too.

I may be missing something here, but this ghillie had better be giving Harry Potter level invisibility cloak for that money.