concretesnail

I'd agree with that, without a doubt prices are going up, and its not even stiff pending release. I've noticed that all their re-stocking of magazines and such have all had price increase, what was £18 magazine is now a £25.

I do, I build a lot of fpv drones so fine soldering isn't an issue, more finding the the parts is the hard work.

Thank you, I'm sure they are four pin, I'll check and get a measurement at the same time. 

I've just tried my racal frontier under a dye i4 and the fit was fine. Radio comes through the left ear, and microphone os built into the right ear.  I have it running through a ptt into a baofeng 5ur radio.
If you really want over ear then I'd look to remove the ear Pro from the mask and go from there, but look to get some gel cups as they conform better to a misshapen set of surfaces (in use peltors for work with assorted pieces of ppe)

Tobiasc95, first thing to check is the magazines. Check that the indent that holds the mag release catch is clean and undamaged. If they are then the issue is likely in the magwell.
If you undo the screw on the larger paddle side of the mag release you should be able to remove all of the parts and inspect them. 
If the magazines are okay, then you should be able to gently bend the mag release bar to move the hook part of the unit more into the mag well.
Pictures will help greatly if following the above doesn't make sense or doesn't work. 
 
For future reference if a magazine gets jammed in the mag well undoing the screw on the large mag release paddle allows the entire catch system to be pushed through and off the well completely.
 
If you need any other info I've done quite a bit to my g&g 308 so stand a good chance of being able to answer questions.

The clitoris has over 8000 nerve endings
 
Still not as sensitive as an airsofter on social media 

Round the head, rambo style. 

Round the head, rambo style. 

Round the head, rambo style. 

Round the head, rambo style. 

First time with op-tac at the kingdom on Saturday, for a 12hr battle sim event. Initial briefing covered all the health and safe stuff and broad rules for the day such as; medics, surrender, capture, etc. With a closed game brief with objectives and timings held for each team in their own fob just before game on.
Games went well, some nice variety in objectives to play throughout the day, as well as time and vip exclusive tasks.
Structured brake / cease fire allowing for provided food if ordered and wanted by the players, being the only stoppage of play throughout the day.
The site is a good mix of natural environment and built structures spread over large area with plenty of elevation changes.
Facilities wise some of the best I've seen on airsoft events; wooden cabins, solid fixture toilet and shower block which was clean and fresh.
With some good footwear and play you will have a cracking day there. I'll be going back without a doubt.

Those b6 chargers are a liability. There's so many clones and poor qc. One of our quad group stripped one and pictures of the internals were shocking.

I use skyrc and idst chargers. If you want a easy to use charger the skyrc units are solid. Idst adds a lot more functionality but as the cost of setup needs.
As to where to purchase, I use hobbyrc.co.uk for lots of my quad parts and service has always been great.
Tutorial wise. Look up Joshua Bardwell on YouTube. A lot of the quad flying folks use his guides and he has a few on batteries and chargers.

Those b6 chargers are a liability. There's so many clones and poor qc. One of our quad group stripped one and pictures of the internals were shocking.

I use skyrc and idst chargers. If you want a easy to use charger the skyrc units are solid. Idst adds a lot more functionality but as the cost of setup needs.
As to where to purchase, I use hobbyrc.co.uk for lots of my quad parts and service has always been great.
Tutorial wise. Look up Joshua Bardwell on YouTube. A lot of the quad flying folks use his guides and he has a few on batteries and chargers.

Would an ak buffer tube mount not work?

Welcome fella. There quite a few places for you to play if your able to drive out from Tamworth, playairsoft.uk is a useful map to start with. 

Hahaha, hopefully there will be less rubber, 12hrs it's going to chafe.
 
For some reason it's what they have been calling it, but it's like a milsim with less stitch counting and less kit restrictions.

Filmsim would be a better description i think.

I've done a few of this type of event, although not with op-tac. I prefer the longer engagements and more complex objectives. I've also found that they draw more experienced and honest players, less youtube fodder and better team/strategic play. 
I'm not one for uniforms and all that either, so i play in good, comfortable gear and clothing which features shades of gray, khaki and olive at best and couldn't meet a lot of milsim dress codes.

Hahaha, hopefully there will be less rubber, 12hrs it's going to chafe.
 
For some reason it's what they have been calling it, but it's like a milsim with less stitch counting and less kit restrictions.

Hahaha, hopefully there will be less rubber, 12hrs it's going to chafe.
 
For some reason it's what they have been calling it, but it's like a milsim with less stitch counting and less kit restrictions.

Check for shorts but it's likely the mosfet is fried if its been smoking. 
The link you posted took me a set for a v3 gear box, the arp is a v2 gear box so that product won't work.
 
If the etu is OK, then the mosfet replacement should be all that's needed, I'd not look at the g&g unit nut instead look for the perun mosfets. They do a plug in upgrade unit that is very good. Etu++ I think it's called.

decided to make my own gun case. It's not the neatest but it works. 
 
Bought a tool box from b&q, hardboard, pick and pluck foam and a few cans of plasti dip. 
 
I made it three layers with the bottom one glued to the base of the box. With the pistol layer I can pick the foam out for other attachments if needed and just plasti dip that section again to firm it up. 
 
All the layers also have foam under each piece of equipment. 

A new liner for one of the cases.