John_W

I notice the Doorkickers page on FB has gone quiet. They have a fair few rednecks, maybe they breached standards. Looking at some of the members the only door they ever kicked in was their cousins...

So a pressure washer lance or garden watering attachment could be mistaken for a rif? They are in various colours. A short sighted,colour blind person could think they were firearms. 
I know I need a rif to play airsoft.
If I'm not allowed a gun in the real and universally accepted guise of a gun then I will step down and take up bloody basket weaving!
I play because I can dress up and run around like a nutter with a real looking gun.take that away and what's the point. 
Back me up guys......🙏
Regards 
So if I spray my dewalt drill black would that be a rif?
If I point it at a plasterer at work they invariably throw their hands in the air and say dont shoot.
😉
Regards 

Yep, probably the back door lol

I find Facebook is a bit like my rota for work , I’ll be on it for a few days then I get a day off (read  ban) Then I have another long run of days on , then I get another couple of days off , then every now and again I get 1 or 2wks off !😉
like today now I’ve got 3 days off simply for directing a reply to an America Covid denier who’d said the rioting was like the pandemic , all fake news and they weren't the trump supporters rioting in Washington , the protest had been ‘infiltrated’ by ANTIFA supporters and they where the ones who attacked the capitol building  , so I said to him and I quote ;
“Infiltrated by ANTIFA ? Are you mental ? All you can see in all the film and pictures are wall to wall inbred rednecks ! there’s not a greasy haired pimply faced skinny ass’ed middle class part time socialist kid to be seen anywhere ! You truly are a mongtard swallowing general bonespurs lies like a toothless 5$ Crack whore working on her knees !” End quote .
Apparently that’s “bullying” and I got 3 days off ! Well there ya go , Who knew ? 😳

I notice the Doorkickers page on FB has gone quiet. They have a fair few rednecks, maybe they breached standards. Looking at some of the members the only door they ever kicked in was their cousins...

Sadly that GIF is long gone.

He had a glock that went pop-pop-pop😀

Made by Hozelock I think 🤔 

Who lives in a Glove Box at the bottom of the sea?
Illegal and plastic and Firearm is he...
 
I heard the story from Aitch that it was actually a Browning in the boot, but that doesn't sound as good

Shockingly, yes! 😂

Cyma SOCOM M14 that I've been faffing with ready for the eventual return of Red Alert...
 

Got bored. Had Paint Pens 😎
 

 

 

 

 
Makes the gun looks much nicer I reckon.
I think I'll leave the trades on the slide alone, what do we reckon?

The old girl got a face-lift
 
In all honesty I've been wanting to do a KWA Vector build for forever. I've lurked on the FB page for some time now, and had an idea of what I wanted to do, but I knew one thing was needed for sure before I invested time and money into the project - an HPA drum. Ive tried the GBB primary route and despised it for a single reason - the mags. Thats why Ive converted so many of my GBBs to Daytonas - WE Masada, VFC M27, etc. Especially here in the States, where its all about highcaps and volume of fire (I do miss UK airsoft; running around The Mall with my TM GBB MP7 or dual pistols...). While I dont need 1000 shots to get a hit, 40ish shots was a bit too little, especially when you go to reload and find your mag has leaked all the gas out. So a drum is a must. As such, my Vector has sat, and sat. 
 
Then, I got an offer. It was a bit steep IMO but I took it, and then I was the proud owner of a broken Reaper Airsoft Customs drum mag for the Vector. Let the build begin!
 
The repair ended up being easy - a lot of epoxy and drying time and it was good to go. I didnt want to use a cheap China clone for a sight like I have on some of my builds - Ive had Daytonas throw off their zeros before. So I used a spare Vortex Sparq AR red dot I had. Magpul MOE irons and AFG2 mod to match my real Vector, Ace1Arms right hand mag release (so much easier when using the drum), replica Surefire M600DF light and my signature blue-lasered PEQ hooked up to a dual pressure switch. I also had to add a 45* rail for the torch so that I could still fold the stock. I have a Defiance .45 ACP suppressor but I am unsure if I will use it due to not needing an increased inner barrel due to FPS gains... Cover the remaining rails with ladder covers and add a sling swivel stock pin and the build is (externally) done. Still need to decide on what to do inside though... Yes @rocketdogbert I will use the FB page for that.
 

It never really gets taken out of the case much, but it still takes good glamour shots 😁

A WWII duo... Double Bell K98k Real Wood and CYMA M1928. Amazing what adding a sling can do for authenticity. 
 

 

@GothicGhost i bet thats actually quite effective camo in use!
 
Finally got around to assembling the G36C, on the whole very happy with the build, although i think im going to have to swap the X-ASR for a Pico AAB, the internal rollback noise of the gears to the anti reversal latch drives me mad on semi!!
 
 





 
Of all the colours i feel the FDE on the mags is the least effective, its too bright i feel, ive got some good ol' Humbrol Dark brown (FDE) aerosol which il prop spritz them with as its such an awesome FDE in use.
 
The whole layout of the gun colouring was to blend with myself / Pencott Greenzone at the rear of the gun, and wrapping the gun around trees/fortifications/dirt etc at the front end.

My Marui USP 9. 
 
As close as I can get it for Australian Commando spec.
Detonator metal barrel.
Repro surefire x300.
Element repro surefire light mount.
Sadly you can't fit a Jet Funnel magwell to a marui gun. 

My we scar L gbbr bullpup conversion.
this is a Sr union scar h Bullpup kit modified to fit the L

Ruger 10/22
 

Yeah modded mine too. Just annoyed the correct trades didnt come out as well as I was hoping. I did set it up as a Mk3.... but then a few pics arose of the Mk2 type. And was surprised to see still using the looped hammer. So thought I'd stick with the early mk2 until the WE mk3 came out. 


 

My far eastern collection is growing. 

As some of you asked for fotos of my collection, I took a few pics 🙂
We restored a house a few years ago and I got the rare opportunity to turn a room into my personal little "museum". The only downside: The showcases are full already... 😅
 
As mentioned in the new members thread, I'm a collector for quite some time now and I'm interested in anything that's odd / old / rare / shellejecting / japanese / gasdriven in general and recently got a knack for a bit more steel here and there.
Unfortunately, the showcases in the middle still lack lighting 😑
 
Disclaimer: Everything in that room is legal and according to german laws, the guns themselves aswell as the showcases, which are locked, when I'm not there. The guns outside the showcases are 0.5 joules, so they don't fall under german gun laws, but are categorized as toys.
 

 

 

 

I have a great fondness for old spring guns myself. Has been posted before and I need to get a new pic as I've got about 20 more since this picture. One day I will have a gun wall.

Small update of my Specnas and AAP
Bottom left is my wanker gun (Titan, 28.5RPS and ludicrous response), top 933 is slightly less wanker at 27.5 RPS and runs on a Warfet.
the Magpul handguard is definitely NOT FDE -.- can't complain though, it's PTS and got it for €9. More comfortable to hold than the standard 933 handguard.

Some WWII stuff

Tanaka Arisaka Type44 Cavalry

 


G&G M1903 converted to USMC Sniper version using a realsteel C-stock, Unertl reproduction scope and several realsteel metal parts: