Jump to content

strykerles

Members
  • Posts

    733
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    100%

Everything posted by strykerles

  1. So the AK is firing lovely and then....... CRUNCH. looks like something has stripped 😪

    1. Druid799

      Druid799

      Bugger , stock or worked on ?

    2. strykerles

      strykerles

      some work, reshimmed and airseal sorted but other than that stock. worked fine for 6 over months

    3. strykerles

      strykerles

      UPDATE!! 

       

      turns out that the bearings at the piston head had fell apart and jammed up the gears

       

      Stripped it, changed out the piston head, changed the spring and added a delayer chip and it now throws out 342fps with a .20 very quickly in auto

  2. Window fitting, van is useful for gamedays too
  3. Supplied by work, got 4 cans 😁
  4. The brand I use is wurth, no dry seals here 😜
  5. I use one from my work that we use for lubricating door hinges and window gearboxes and it works fine. Not had any problems with it
  6. you're right, didn't see the other post 😵
  7. before I dive down a youtube wormhole does anyone know how to remove the cocking handle from a Cyma mp5k?

    1. Show previous comments  1 more
    2. Ace Airsoft War Games

      Ace Airsoft War Games

      We have Cyma MP5 Rentals, not the K version but it might be similar.
      Only ever removed the slider by the way not the handle itself but found this for you.

      "The cocking handle is disassembled by removing the upper receiver from the handguard and sticking a long philips head screwdriver down the FRONT IRON SIGHT housing. You need to remove the handguard pin as well in order to disassemble the front iron sight and access the screw to remove the charging handle."

      To remove the cocking Slider & Spring:
      Take out the push pins circled in the photo (probably have to take the top right one out too on the K version) and slide the grip and gearbox backward out of the receiver, attached to the gearbox should be a slider bar with a spring on it.
      Inside the rest should be the slider, tilt it backward to remove the slider (should just fall out.

      MP5K.JPG

    3. Ace Airsoft War Games

      Ace Airsoft War Games

      Apparently there's also a handle pin you have to punch out??

    4. strykerles

      strykerles

      Thanks for that. I'll have a look

  8. If you can find the smaller keymod rails it makes things easier. Had to order mine from China
  9. If its an mp5k then this will fit
  10. I tried that but it didn't move and stopped as I didn't want to bugger it up 😂
  11. They can be picky with mags and they tend to be quite loose. I use the battleaxe enhanced grip mags with some velcro padding inside the magwell to reduce movement and it works for me
  12. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • As new

    as above boneyard AK wanted, just for parts

    £12,345

    - GB

  13. If it's starting to come part it's probably best to bin it, should beable to save the piston head though
  14. I think I answered this in another topic, a pso won't fit as the cyma vss isn't a 1.1 copy. The bulb holder will hit the dust cover. I've tried on mine Lct did make a scope riser but they are hard to come by now
  15. ok here's a list 7mm QD V3 gearbox 8mm QD V3 gearbox SHS 13.1 gears 2x QD spring guides 2x long AK nozzles 2x short AK nozzles 2x set 7mm bearings 2x set 8mm bearings AK charging handle and spring set Gate V3 basic Flat mp5k trigger Gear shim set and some beer because i'm gonna need it putting these guns back together 😂
  16. check out @ak2m4 their website should have what you need
  17. anyone know of any slim stick batteries higher than 1200mah?

    1. AK47frizzle

      AK47frizzle

      how slim we talking? The slimmest 11.1v I have so far is the nuprol 1450mah one. That can fit in an m4 buffer tube.

    2. strykerles

      strykerles

      the really slim type for fitting inside my MP5K and CZ bren, pic is a 7.4v but you get the idea

       

      s-l1600.jpg

  18. This advert is COMPLETED!

    • Wanted
    • Used or as new

    As above V3 QC gearbox wanted, just the shell or complete it's going to be gutted so it doesn't matter

    £12,345

    - GB

  19. Sp my local outdoor site has gone to strictly bio bbs.

     

    Just got a lot more expensive for heavyweights 😪

    1. Show previous comments  6 more
    2. Gozza

      Gozza

      I ordered a bag of bio .30g from 6mm ammo yesterday, it came to only ~£11 with a discount code (cant remember the code, just google and you should be able to find it), with free delivery which is a massive plus. I hope it's good ammo, not used them before!

    3. Monkman

      Monkman

      Mis-posted... Sorry

    4. Monkman

      Monkman

      Apologies...posted in wrong place... Doh!!! :(

       

  20. that's an interesting looking gearbox. Do you have to put it back together with the motor in place?
  21. The WE version does have an internal thread. Just had a look at mine, didn't know until I looked 😁 Also there is a version of the MP-443 grach available but I've heard it's not great, there is also the Glock 17 which some russian branches use
  22. UPS suck ass, expecting a delivery today. Had an email saying it was out for delivery and it had my name and address on.

     

    Then get another email later saying the name in the parcel is wrong and delivery will be delayed. WTF.....

    1. Show previous comments  7 more
    2. Nick G
    3. strykerles

      strykerles

      Don't think so, depends on the gearbox. Don't know a lot about ics.

       

      Thanks for the link though 👍

  23. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    purchased a dboys boneyard ak that doesn't have a bolt, guessing a cyma would fit thanks

    £12,345

    - GB

  24. Don't you hate it when a motor connector snaps off as you bend it to fit 🤬

    1. iptaylor

      iptaylor

      Did that to my ICS, ordered new crimps and soldered cable direct to motor.

    2. Rogerborg

      Rogerborg

      Yes, horrid little things.  I notice that warhead motors come with short tails for the connectors, and really all aftermarket motors should be like that.  Having seen that, I'm minded to solder some tails onto all my motor connectors [puts it on the list].

×
×
  • Create New...