strykerles
-
Posts
666 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by strykerles
-
Heavier BBs, 0.36 to 0.40, Most Cost Effective To Buy In 2022?
strykerles replied to Fatboy40's topic in General Help
I agree with valkyrie bbs. I use their .28s and .32s in my ages and they are good. For heavyweights I use .43s in my VSS dmr and .36s in my SVD dmr. Its never cheap buying hevier. I found 1000 round bags of guarder .43s for £11 and they seem fine. I have also considered just taking a bag of coins to throw at people too 😋 -
looks like that's been filed off, strange
-
anyone got a catapult??
-
Anyone ever put a titan in a v3 mp5k before? Selector plate is a bitch to set up 😂
-
anyone ever had a gearbox with different size bearings in the 2 halfs??
-
I use bullseye country sport aswell, good selection
-
So the AK is firing lovely and then....... CRUNCH. looks like something has stripped 😪
-
-
-
UPDATE!!
turns out that the bearings at the piston head had fell apart and jammed up the gears
Stripped it, changed out the piston head, changed the spring and added a delayer chip and it now throws out 342fps with a .20 very quickly in auto
-
- lukeB, Shamal and Tactical Pith Helmet
-
2
-
1
-
-
Window fitting, van is useful for gamedays too
-
Supplied by work, got 4 cans 😁
-
The brand I use is wurth, no dry seals here 😜
-
I use one from my work that we use for lubricating door hinges and window gearboxes and it works fine. Not had any problems with it
-
you're right, didn't see the other post 😵
-
before I dive down a youtube wormhole does anyone know how to remove the cocking handle from a Cyma mp5k?
- Show previous comments 1 more
-
We have Cyma MP5 Rentals, not the K version but it might be similar.
Only ever removed the slider by the way not the handle itself but found this for you.
"The cocking handle is disassembled by removing the upper receiver from the handguard and sticking a long philips head screwdriver down the FRONT IRON SIGHT housing. You need to remove the handguard pin as well in order to disassemble the front iron sight and access the screw to remove the charging handle."
To remove the cocking Slider & Spring:
Take out the push pins circled in the photo (probably have to take the top right one out too on the K version) and slide the grip and gearbox backward out of the receiver, attached to the gearbox should be a slider bar with a spring on it.
Inside the rest should be the slider, tilt it backward to remove the slider (should just fall out.
-
-
-
If you can find the smaller keymod rails it makes things easier. Had to order mine from China
-
If its an mp5k then this will fit
-
I tried that but it didn't move and stopped as I didn't want to bugger it up 😂
-
They can be picky with mags and they tend to be quite loose. I use the battleaxe enhanced grip mags with some velcro padding inside the magwell to reduce movement and it works for me
-
-
If it's starting to come part it's probably best to bin it, should beable to save the piston head though
-
I think I answered this in another topic, a pso won't fit as the cyma vss isn't a 1.1 copy. The bulb holder will hit the dust cover. I've tried on mine Lct did make a scope riser but they are hard to come by now
-
The 'What have you just bought' Thread
strykerles replied to Cameron364's topic in Guns, Gear & Loadouts
ok here's a list 7mm QD V3 gearbox 8mm QD V3 gearbox SHS 13.1 gears 2x QD spring guides 2x long AK nozzles 2x short AK nozzles 2x set 7mm bearings 2x set 8mm bearings AK charging handle and spring set Gate V3 basic Flat mp5k trigger Gear shim set and some beer because i'm gonna need it putting these guns back together 😂 -
check out @ak2m4 their website should have what you need
-
anyone know of any slim stick batteries higher than 1200mah?
-
