All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- Wanted
- Used or as new
looking for 2 or 3 TM MWS 35rd mags. new or almost new condition.NO VALUE SPECIFIED
-
I have 2 AEG's, KWA Eve-9 and a Specna Arms SA-X02 and need to find a way to fit a bigger battery in each. Not more mAh, actually physically bigger. My dilema is I purchased a Turnigy Nano-Tech 2000mah 3S 15~25C Lipo not knowing the physical size. It looks like a great battery but alas it doesn't fit in either of the battery compartments. A bit stupid of me I know, but this is just a problem that needs to be figured out. Are there thicker battery tubes available for the Specna Arms or stocks with bigger battery compartment for the KWA? I'm pretty new to this so still learning about what's out there.
-
Lozart reacted to a post in a topic:
Gun picture thread
-
Thanks to @Lozart for setting me up with some medium scope mounts that are the perfect height since the low mounts it came with were too low. I wanted it as low as possible and with the medium rings it's less than 1mm clearance over the rear sight, so it's perfect! M14 recce setup is now done!
-
Lozart reacted to a post in a topic:
Pistol recommendations
- Today
-
Tommikka reacted to a post in a topic:
Moving Gun safes out of basement
-
Lozart reacted to a post in a topic:
Warrior Assault Systems: DCS or LCP?
-
I'll second that with recommending a Hi Capa. Can stay standard or go any direction really. They are excellent pistols. I went a bit silly with my TM Gold Match.. literally not a part original left inside or out 🤪 It is fantastic for CQB.
-
Time Left: 6 days and 22 hours
- For sale
- As new
Good condition P&P included in price£45
Peterborough
-
Time Left: 6 days and 22 hours
- For sale
- As new
Opened but unused Great condition P&P included Rear block has been cut by manufacturer to fit ghk/Lct spec£115
Peterborough
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
csBrown44 joined the community -
Tackle reacted to a post in a topic:
Pistol recommendations
-
I wasn't keen on hi capas when I started airsoft, but I have come to regard the TM ones as probably the greatest of all airsoft pistols. They have the best trigger of any pistol and are the easiest to disassemble and reassemble. There are not that many internal parts to worry about. Metal slides, outer barrels etc are readily available. The only thing I don't like about them is the grip, but that is easily fixed. I prefer to fit Guarder tactical grips which make the hi capa look more like a regular 1911 and less like a race gun. But if you like the race gun look, you can pick up a Cow Cow grip for not much more than twenty quid, and buy a nice magwell to compliment it. I have had loads of pistols over the years, and I love Glocks, but the hi capa has been the most reliable and the best performing. The FNX 45 was pretty good but I never got used to the look of it. IMG_5336.HEIC IMG_9869.HEIC
-
Time Left: 6 days and 21 hours
- For sale
- Used
For sale barley used krytac kriss vector aeg with 7 mags and 2 batteries in great working condition£600
, Essex - GB
-
el889 joined the community -
.thumb.jpeg.ca0f11ef2f73e1ea69bbf8242d55a9f4.jpeg)
Time Left: 6 days and 21 hours
- For sale
- Used
This has been my go to gun for about 5 years now and the time has come to part ways. Always putting a smile on my face and never missing a beat. Now discontinued and becoming increasingly hard to find, this gun turns heads and always gets comments! The internals have been left well alone - the gearbox is bulletproof. A CNC Bull Gear hop unit with a Laylax Prometheus 6.03MM 509MM Inner barrel was fitted. I cannot remember if I left the standard hop rubber in or left the Laylax Purple rubber in. Either way, the hop works very nicely and doesnt need swapping. Also, I have fitted a Bull Gear Magazine insert to increase the box mag capacity to 7000rds! Both bull gear parts the hop (£65~) and the magazine insert (£115-140~) are also hard to find now outside of asia. Will include the inert ammo belt with the gun, bought from cold war collectibles a few years ago and is a nice addition to the gun and hides the battery leads very well. Includes original magazine insert, so could possibly be adapted to a pkm empty box mag and original barrel/hop unit. The magazine internals were also covered by myself with some felt, to dampen the sound of BBs rattling about. Case not included but may be interested in selling. Comes with original box. I have a couple of attachments that I am selling separatly and will hold off selling until the gun is sold to give the new owner the option of buying. An Airsoft Artisan RK8 Grip - only used once and was about £80 plus shipping from asia as you can only seem to get these over there. And a 'Feral' Rear Sight Rail for mounting optics. Never used and cant remember where I bought it from. If you'd like any more information - photos - videos please dont hesistate to contact me.£800
Poole, Dorset - GB
-
.thumb.jpeg.2a4a88a9fe05506ad958d8ce1e94b307.jpeg)
Time Left: 6 days and 21 hours
- For sale
- Used
Selling my PP-19, only owned for just over a year and skirmished a handful of times. Comes with x6 double mags, can be detached indepentantly (mid cap) The LCT ZB-21M Lower handguard, LCT ZB-19 Upper handguard and original hand guard. Also a 5KU B-22 AK Classic upper rail. A very solid gun with mostly metal construction. No internal upgrades have been done. Plenty of extra parts available. Ask for details. Photo with torch/grip/suppressor & parts on floor just for show - parts available separately£550
Poole
-
£450 ish , probably better off breaking it down and listing the bits separately on eBay though .
- 1 reply
-
- 1
-
-
its a spam bot
-
I see you're a Colonial chap who's talking about real steel (again: this is an airsoft forum, toy guns, pew-pew-pew), so why not order an auto-sear online using your credit card and let your government come and remove your safes for you?
-
I was going to say that if you're playing CQB, you can run a GBB pistol primary effectively, and if you get the right one, you can dress it up in any carbine kit you like. However, Apocalypse is a hundred acre woodland site, so I'd definitely go AEG there. And of course rent first and try airsoft out a few times before buying anything (except footwear and maybe eyepro). I suspect that OP may be listing what he wants, rather than what he has.
-
Warrior Assault Systems: DCS or LCP?
pyromancer6 replied to pyromancer6's topic in Guns, Gear & Loadouts
Awesome to hear - what size did you end up getting if you don't mind me asking? I tried on a friend's DCS last sunday and it was a little snug on me (but he is also much younger and much skinnier than me lol) but that could've just been the way he's adjusted it to himself (medium size) Exactly what my friend I tried it on said - they do sales all the time so just wait. Guess I'm going to have to open another pay in three haha -
I got my MK18 from Fire Support. I seem to remember Surplus Store being reasonable but the deal with three extra mags is a good one. I contacted FS about mags at the time and they confirmed the only difference between M4 and Type 89 MWS mags is the look. I got extra mags on eBay of all places, mainly because I prefer the look of the M4 mag. If you're looking to turn your M4A1 into a MK18 then there are some posts in this thread that would be worth you finding, although if you're planning to buy the stuff straight away you may find it more cost effective to just get a MK18 .... which is out of stock by the look of it. Fire Support's stock alerts are pretty timely though, that's how I landed mine.
-
Everything that everyone else has said. Personally, if I was doing it, I'd get a winch, electric or chain, partially board the stairs with a minimum 18mm ply (enabling you to use any suitable trolley or dolly), leaving a gap on one side just big enough to enable you to step down the side if necessary, a decent size timber such as a 4in post laid across the doorframe at the top of the stairs to protect the floor/top step, & let the winch down the work slowly & safely. Obviously this is all assuming you can winch straight ahead of the doorway at the top of the stairs ? All sounds like a lot more work, but if your determined determined to do this on your own, this way you don't risk them getting away from you, potentially harming you or damaging your home.
-
Sounds like you've come to the right conclusion, you can scratch your GBB itch at a later date. Cost of entry into the GBB game is eyewatering, a sidearm is a cheaper way in as you use it less and therefore can get away with less mags, but it's certainly not a necessity or a replacement for a rifle. You can prepare yourself for getting a GBB by getting mid-caps, or even lo-caps. I use 100rnd midcaps on my 308 but still have my emergency hi-cap as a last mag. It was actually then that I found that 200 rounds does me just fine in most games, so I bought enough gas mags to cater for that and a bit of extra on top. I see you have an MP5K, how may shots are you using most games? All that said, I love my MK18 and MP7 GBBs!
-
#metoo, had more kick on it than people realised, movies have got a lot to answer for lol 😂
-
viking89 joined the community -
Back in the day I used to shoot the real Hi Power - which has increased my love/desperation for a decent airsoft version rather than quelled it!
-
The key problem is not the weight of safes, but ensuring they are stable (strapped to the trolley / dolly), and that you have good grip / control When moving the safe upright on a trolley you need balance to ensure the weight is going down the trolley to its wheels and not onto you holding the trolley up. With the triple sets of stair wheels you aren’t wheeling the trolley up the full set of stairs but are wheeling the corner point of each step - in theory this is then a series of single steps, therefore you’re pulling the safe up one step at a time. https://youtube.com/shorts/-PzRd6VhI_4?si=d0OuHmzCJaFsTfRi I would prefer it to be two people, one ‘controling’ from the top of the trolley, and ideally not holding two vertical handles but with a cross bar (so that their grip isn’t around a vertical which can slip) and the second acting as a brace below with some push. Powered ones would be ‘better’ in theory but the power element is in the moving - ideally you aren’t taking the weight in the movement so to a degree that’s laziness The best feature of these types is the rubber track, which also comes in evacuation trolleys The ‘tracks’ are there to span across all of the steps, but with their grip they prevent the load from running away from you. (I hope that I don’t need to tell anyone not to use an evacuation chair to move a safe !!!) A decent trolley with the tracked feature would be good, but a solid multi wheeled stair trolley will do the job Just remember to think before each movement - is it steady, secure etc and are you in control?
-
After shooting a real Glock I lost any love for Airsoft Glocks.
-
Good Morning All was just wondering what sort of value I could sell on my AVS for, comes with an AXL equinox cummerbund and tube adaptors, Crye Avs yoke cannot see any major flaws with it Bought at the start of the year, never used it as I just didn’t like how it fit so just curious pictures below
-
Time Left: 6 days and 19 hours
- Swap only
- Used
As per title, a friends sig P226 is up for sale, it recently had a trigger issue so we picked up a donor P226 and swapped out the parts and it's now working fine (video can be provided as proof) but as we're doing UKSF kits he need a a glock 3 mags are leak free, however one needs a replacement feed lip, we tried to 3d print one but it's just not decent enough Fps is 250 which is fine for a TM pistol This comes with a spare P226 for parts However the while thing can be for sale for £120 so we can fund a Glock£120
-
Time Left: 6 days and 19 hours
- Wanted
- Used or as new
Wanted - Working CYMA CM506 M4 AEGNO VALUE SPECIFIED
, West Midlands - GB
