Dman28 Posted October 9, 2023 Share Posted October 9, 2023 (edited) Has anybody heard any news about another brand making mags for the TM NGRS MP5? Somebody like PTS or something. I'm surprised nobody has done it yet especially when the mags have been in such short supply for two years now. Edited October 9, 2023 by Dman28 Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted October 9, 2023 Supporters Share Posted October 9, 2023 Not seen anything, it might be a bit niche for PTS, maybe, fingers crossed. From what I've seen generally there's (comparatively) not a ton of different types of mags out there for any of the normal AEGs even less so any of the GBB MP5s. Don't think there's a clone of the gun itself yet? That'll be part. RS wise the standard HKs mags are the only widely known style I'd say, with the old straight 30s a fair bit behind, then maybe a few know of the clear ETS ones. Dman28 1 Link to comment Share on other sites More sharing options...
Krisz Posted October 9, 2023 Share Posted October 9, 2023 45 minutes ago, Dman28 said: Has anybody heard any news about another brand making mags for the TM NGRS MP5? Somebody like PTS or something. I'm surprised nobody has done it yet especially when the mags have been in such short supply for two years now. Impulse101 is your best bet or other far east airsoft retailers. Dman28 1 Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted October 13, 2023 Share Posted October 13, 2023 You can now get a Magpul style lower for these 😮😮 Link to comment Share on other sites More sharing options...
hunter511 Posted October 15, 2023 Share Posted October 15, 2023 On 13/10/2023 at 16:04, Wavey_Gravey said: You can now get a Magpul style lower for these 😮😮 More details required. Is this a "thing" or is this a "got a real one and did a fuck load of dremelling" kinda deal? Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted October 15, 2023 Share Posted October 15, 2023 It’s a thing: https://impulse101.jp/en/conversion-kits/115m-3d-magpul-sl-type-grip-module-for-tokyo-marui-next-gen-mp5-series-5791 Link to comment Share on other sites More sharing options...
Jacob Wright Posted October 18, 2023 Share Posted October 18, 2023 I can see the release date for the A4 was today - anyone got any leads on preorders or where might have them in? Link to comment Share on other sites More sharing options...
Wavey_Gravey Posted October 18, 2023 Share Posted October 18, 2023 58 minutes ago, Jacob Wright said: I can see the release date for the A4 was today - anyone got any leads on preorders or where might have them in? Airsoft direct are the only place I’ve seen so far. Jacob Wright 1 Link to comment Share on other sites More sharing options...
lokkers Posted October 19, 2023 Share Posted October 19, 2023 13 hours ago, Jacob Wright said: I can see the release date for the A4 was today - anyone got any leads on preorders or where might have them in? Impulse101 have them, although you'll almost certainly have to pay import duty on it. Jacob Wright 1 Link to comment Share on other sites More sharing options...
MikeMarden Posted November 3, 2023 Share Posted November 3, 2023 Hi all Finally picked up an MP5 SD6 NGRS, mighty impressed & was certainly taken back as to how well built & chunky it is! Quick Q if I may, has anyone fitted a Tracer Unit? - presuming its a case of removing the supressor & fitting directly to the thread Attached a picture, blue arrow pointing to what I'm presuming needs to be removed in order to attach the tracer to the barrel thread - For reference its an AceTech Brighter C Tracer Please advise if anyone has any experience Thanks Mike MP5 End.pdf Link to comment Share on other sites More sharing options...
Krisz Posted November 3, 2023 Share Posted November 3, 2023 (edited) 1 hour ago, MikeMarden said: Hi all Finally picked up an MP5 SD6 NGRS, mighty impressed & was certainly taken back as to how well built & chunky it is! Quick Q if I may, has anyone fitted a Tracer Unit? - presuming its a case of removing the supressor & fitting directly to the thread Attached a picture, blue arrow pointing to what I'm presuming needs to be removed in order to attach the tracer to the barrel thread - For reference its an AceTech Brighter C Tracer Please advise if anyone has any experience Thanks Mike MP5 End.pdf 69.78 kB · 3 downloads Something like THIS would be the easiest solution but I don't know if there is a difference between cyma and marui dimensions regarding that suppressor. Quite a few people do 3D printing on this forum so if that thing doesn't fit properly or wobbles when you move the gun you could still ask around here to get custom inserts. I think Airtac makes custom work as well but probably it takes some time to get them. Edited November 3, 2023 by Krisz Link to comment Share on other sites More sharing options...
JimFromHorsham Posted November 3, 2023 Share Posted November 3, 2023 I’ve just got an Acetech mini tracer unit (Lighter S iirc ) fitted in mine , directly to the -14mm thread that is under that cap you’ve highlighted , then the outer screwed back on . Works perfectly and you don’t even know it’s there till you need it , like just now 😛 IMG_6086.mov Theturdinator and MikeMarden 2 Link to comment Share on other sites More sharing options...
Jacob Wright Posted November 5, 2023 Share Posted November 5, 2023 Magazines in stock at Eagle 6 👍🏼 (ignore the bit that says pre-order) https://eagle6.co.uk/shop/catalog/product/view/id/6870/s/tokyo-marui-mp5a5-ngrs-magazine-72rd-pre-order-eta-late-august/ Link to comment Share on other sites More sharing options...
BigStew Posted November 8, 2023 Share Posted November 8, 2023 On 05/11/2023 at 18:21, Jacob Wright said: Magazines in stock at Eagle 6 👍🏼 (ignore the bit that says pre-order) https://eagle6.co.uk/shop/catalog/product/view/id/6870/s/tokyo-marui-mp5a5-ngrs-magazine-72rd-pre-order-eta-late-august/ Thanks for the heads up. the lack of mag availability was stopping me getting an MP5A5. placed the order Monday mags turned up today. so i have mags before I have a gun. that's on the way from Wolf Armoires. Other than the TM claw mount anyone suggest a mount that will fit? Jacob Wright 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted November 8, 2023 Share Posted November 8, 2023 No worries, I was in the same boat but when I discovered E6 had some in I bit the bullet! Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted November 8, 2023 Supporters Share Posted November 8, 2023 @BigStew I have a real mount that fits, so *presumably* they all will, also anything for the VFC GBB line seems good, or at least close. I think the old style AEG stuff often needs work from what someone else posted (?). BigStew 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted November 8, 2023 Share Posted November 8, 2023 What we need .. is a list of what fits from what manufacturer and what doesn’t! Link to comment Share on other sites More sharing options...
Supporters TheFull9 Posted November 8, 2023 Supporters Share Posted November 8, 2023 I mean that's the same for everything in this lark 😂 but airsoft stuff is too cheap to ever say anything much with certainty, hell probably applies to the likes of Magpul too I'd imagine they pump out millions of plastic bits per year so there's gonna be tolerance wobble. I'm sure someone here said their Magpul handguard dropped on easily, whereas with the one I have it can just about be persuaded on and is then one major sweary effort to remove, totally not viable for game use and currently being filed and sanded in to submission. On the other hand my VFC old school Surefire style lighted handguard fits great and just needed a hairs width of plastic reaming out of the pin hole to work perfectly, but I'd bet other people who try other examples of that handguard on their own TMs will have different experience. I had to have a LOT of work done to a real collapsible F stock to get it to fit, not a good idea at all. Personally my sum up is that I'd only expect TM NGRS MP5 stuff to just drop in, maybe the couple of laylax bits. RS and VFC GBB stuff is often close enough to be viable after work, but probably expect it to not fit out of the box. I don't think any other AEG MP5 stuff is viable except maybe some optics mounts but probably with work. If you approach it like that, you hopefully won't go super far wrong. Jacob Wright 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted November 8, 2023 Share Posted November 8, 2023 Fair point, quality control just isn’t what it used to be 😂 I’m glad to hear the VFC Surefire grips might fit without too much of an issue, just need to source one now. Link to comment Share on other sites More sharing options...
Krisz Posted November 8, 2023 Share Posted November 8, 2023 (edited) 8 hours ago, BigStew said: Thanks for the heads up. the lack of mag availability was stopping me getting an MP5A5. placed the order Monday mags turned up today. so i have mags before I have a gun. that's on the way from Wolf Armoires. Other than the TM claw mount anyone suggest a mount that will fit? Cyma MP5/G3 claw mount fits perfectly and rock solid. Cyma extended m-lok didn't stay in place due the gun's recoil and it doesn't fully held by those metal tabs on the upper receiver so it's waste of money. Haven't tried Marui ones. Edited November 8, 2023 by Krisz Jacob Wright 1 Link to comment Share on other sites More sharing options...
BigStew Posted November 10, 2023 Share Posted November 10, 2023 possibly the nicest AEG i have ever held. Jacob Wright and lokkers 1 1 Link to comment Share on other sites More sharing options...
Jacob Wright Posted November 10, 2023 Share Posted November 10, 2023 3 hours ago, BigStew said: possibly the nicest AEG i have ever held. I concur, TM build quality is already top quality but I was really impressed with the feel and weight of the MP5. Can’t wait to use it! Link to comment Share on other sites More sharing options...
PigDoggy Posted November 11, 2023 Share Posted November 11, 2023 40mm railed ring from Amazon to mount a camera on. Had to bend them a little to accommodate the wider diameter of the can. I added some electrical tape to the back of the ring to provide grip and avoid scratches on the SD’s factory finish. Link to comment Share on other sites More sharing options...
PigDoggy Posted November 11, 2023 Share Posted November 11, 2023 On 13/10/2023 at 08:04, Wavey_Gravey said: You can now get a Magpul style lower for these 😮😮 I hope they end up being more readily available. It’s essentially the only thing I need to complete this thing. Link to comment Share on other sites More sharing options...
MikeMarden Posted November 11, 2023 Share Posted November 11, 2023 5 hours ago, PigDoggy said: 40mm railed ring from Amazon to mount a camera on. Had to bend them a little to accommodate the wider diameter of the can. I added some electrical tape to the back of the ring to provide grip and avoid scratches on the SD’s factory finish. May I ask which Claw Mount you're using please? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now